Building/maintenance Hub



building/maintenance hub where u can load trains with building materials to dispatch them to a new construction site
location: center of the map in Lake Forrest
materials need to be brought in via drones
-added a second building that manages other materials then the first one (new materials included)
-updated with t6 conveyors
-made it a perfect fit into the envoirement
-second building has 7free spots open for any kind of resource that can be addad
-builded on pillars so the water remains free to use
Update 1:
-altered the train entrances, moved them 1 foundation for the track junctions inside and th fit better in the environment
-changed the junctions inside the building that caused the trains to block or derail each other
-removed the light posts on top of the building
-added an extra junction on the north side of the complex for extra global train connections
- 项目计数 16,771
- 坐标 27,611 / -32,165
- 仅粘贴在原始位置 Yes
- 类别 Architecture Tracks system Stable (1.0)
- 创建于 2024年9月25日 下午2:38:40
- 最后更新于 2024年10月4日 下午3:48:03
-
地基 (1米) 4,365
-
基础墙壁(4 米) 2,684
-
窗户(幕墙框架) 1,853
-
窗户(框架) 1,236
-
外角延伸墙 (4 米) 1,091
-
双面坡道 (8 米) 826
-
倒置坡道(4米) 433
-
6级传送带 427
-
传送带立架 284
-
大型支柱(混凝土) 266
-
地基 (4米) 222
-
铁轨 218
-
6级垂直传送带 211
-
天桥(直线) 208
-
天桥(T形路口) 172
-
基础墙壁(1 米) 159
-
输电线 153
-
地基(框架) 144
-
四等分管壁(倒置外角) 116
-
传送口墙壁 116
-
天桥(坡道) 94
-
大型支柱基座 80
-
斜角(4 米) 78
-
地基 (1米) 74
-
1级墙壁接电桩 64
-
倾斜墙壁(8 米) 60
-
倾斜墙壁(4 米) 60
-
围栏(高) 60
-
铁轨道岔控制杆 50
-
区间信号灯 47
-
斜角(1 米) 44
-
5级传送带 44
-
方形牌(2 米) 42
-
3级传送带 41
-
无人机平台 40
-
分离器 40
-
内角延伸墙 (4米) 39
-
工业级集装箱 38
-
货运站台 38
-
坡道(倒置框架) 36
-
斜角(2 米) 30
-
倒置凹角(4米) 30
-
倒置凸角(4米) 29
-
坡道墙壁(4 米) 27
-
路径信号灯 27
-
吸顶灯 20
-
小型支柱(框架) 20
-
墙壁(中央门) 18
-
蓄电池 16
-
坡道(框架) 12
-
凹角坡道(4 米) 12
-
天桥(拐角) 10
-
天桥(交汇口) 9
-
四等分管壁(倒置内角) 8
-
坡道墙壁(8 米) 8
-
列车站 6
-
凸角坡道 (4 米) 4
-
倒置坡道墙壁(4 米) 4
-
输电塔(平台) 4
-
5级垂直传送带 3
-
灯光控制面板 2
-
墙壁(侧门) 2
-
雷达塔 2
-
瞭望塔 2
-
Rotthier - 2024年10月25日 上午12:27:43
most likely due to the 1.0 update it worked fine i to noticed that the drones went to wrong locations to
-
Euzie - 2024年10月24日 下午10:35:58
Just a quick FYI; The 7 open drone ports all have the same name, which (at time of writing) bugs out the destinations of named Ports. In my case, I made some basic stuff (plates, rods, concrete) and set them to transport to the main building. After doing that and checking if i did it right, they switched to Encased beams drone port and some other randoms. Fixed it by naming the empty drone ports 1 through 7, and now it works fine. Might want to update your Mega blueprint and just add in those numbers to avoid future troubles! Excellent build regardless
-
Rotthier - 2024年10月4日 下午3:49:18
thanks for bringing this to my attention, i altered the blueprint. i hope it workes better now
-
Rotthier - 2024年10月4日 上午11:44:47
i will work on it
-
moe_pse - 2024年10月4日 上午11:06:10
lagfest related to my crappy GPU i guess. a 4080 might be good here ;) for the rails: on the northern part of the building are rails from GRN colliding with those round concrete pillars of yours. the rails (and pillars) from latest GRN will clip through your building on that northern side. test is done in 5mins; just load both blueprints and see where they overlap ;)
-
Rotthier - 2024年9月30日 下午10:22:30
it runs perfectly on my pc, also no problems on the rails here i tested it out for hours before i posted it
-
moe_pse - 2024年9月30日 下午12:04:15
a beauty by day, a beast by night! :) with lights on, this beautiful build turns into a massive lag-fest with single-digit FPS (had to look down to the ground to be able to walk towards the lights controller ;D) some minor rail adjustments have to be done to fit onto latest GRN as well so it won't clip through each other and connect properly. had to delete some GRN parts and re-connect them to one of the inner upward-spirals. no biggies though. a proper 4 out of 5 i'd say for sure! thnx 4 sharing! :)