Project P.I.O.N.E.E.R.




Welcome to the Planetary Initiative Organization Nexus/ Engineered Economical Rocket, or Project P.I.O.N.E.E.R. I took a bit of inspiration from the Star Carrier book series by Ian Douglas to make a spaceship themed central hub; utilizing the mushroom cap design used for near light speed travel radiation shielding for the bulk of the factory.
The whole base is more than just a storage hub. There is a hypertube system and bridge that can quickly move a pioneer from the grassy canyon to the upper plateau. There are also 4 P.P.C's (Pioneer Projectile Cannons) utilizing B.E.L.T. loading (Biological Equipment Loading Transjector) capable of sending pioneer nearly anywhere on the map with jet pack/parachute creativity. There is also a prototyping holodeck off of the armory
There is also a full manufacturing setup for processing biomass, slugs, packaged fuel, and ammo/nobelisk production. Production utilizes parts from storage, along with piping in the needed oil and water. You will need to create drone ports to fly in 4 resources:
Coal 120 PPM Sulfur 120 PPM Bauxite: 120 PPM Uranium: 20 PPM
But the best part is the Rapid Part Delivery System. I have a drone port mapped to every part type along with 2 additional drones for use as ammo and supply drops. These drone ports are also connected to the sorting bus; so you can have the drones bring back unneeded parts, wood, leaves, ect. for storage and processing. It takes around 2 minutes at most for any parts to deliver by drone once you have it mapped to a field drone port.
---I've received a few complaints about the storage not showing any parts, which is true only when you first start loading parts. When parts are filtered, they go through a priority load order. First priority (where applicable) is to load the production machines for ammo production, second would be to fill up the drones and drone ports, then they will start filling up the storage bins. Please keep this in mind that it will take time for parts to show in the storage bins, but they will likely show up for drone delivery almost right away.
***For obvious reasons, do not feed WIP items into the sorting bus, the entire thing will end up jamming. I do have filters set up just before the sinks on the sorting line to pull unsinkable items into a storage container, as long as the items can be selected in programmable splitters
Please drop me a line at Yokmosho on Discord with any comments or bugs/issues found
Updates/fixes: 12-3: connection issue before final sinks fixed 12-8: sped up uranium belt to nuke nobelisk production so uranium doesn't back up in the drone port storage and lead to massive amounts of radiation in the base. Also rebuilt the hypertubbe entrance and landing zone at the bottom of the rocket to prevent the "relativistic death cannon" when using the hypertube from the top. 12-11: reversed fill order on packagers to prevent water overflow from taking all containers and stalling. Also replaced a missing merger near the end of the main feed bus that led to an eventual overflow
- Liczba przedmiotów 39 618
- Koordynaty -25 / 85 038
- Wklej tylko w oryginalnej lokalizacji Yes
- Kategorie Architecture Complete factory Interior decorations Exterior decorations Pipes system UPDATE 8
-
Klasyfikacja
3 / 5
- Wersja kompilacji 269 772
- Autor Yokmosho
- Pobierz (814x) Pobierz
- Rozmiar pliku 2,13 MB
- Data utworzenia 3 gru 2023, 16:12:18
- Ostatnia aktualizacja 12 gru 2023, 01:21:33
-
Prosta ściana (1 m) 5 084
-
Prosta ściana (1 m) 3 055
-
Fundament (1 m) 2 937
-
Rama fundamentu 1 579
-
Taśmociąg kl. 5 1 472
-
Metalowa belka 1 267
-
Pochylona ściana (1 m) 1 166
-
Etykieta (4 m) 1 070
-
Prosta ściana (1 m) 823
-
Łącznik belek 813
-
Pionowy wyświetlacz 792
-
Mały billboard 696
-
Pochylona ściana (1 m) 670
-
Linia zasilania 665
-
Fundament (1 m) 645
-
Rama podłogi 579
-
Podnośnik taśmowy kl. 5 529
-
Kwadratowy wyświetlacz (1 m) 474
-
Kwadratowy wyświetlacz (1 m) 463
-
Duży billboard 461
-
Rama ściany 459
-
Fundament (1 m) 457
-
Pomalowana belka 448
-
Pochylona narożna ściana (1 m) 446
-
Pochylona ściana (1 m) 441
-
Pochylona ściana (1 m) 403
-
Okno z ramą w sześciokąty 393
-
Przepust podłogowy podnośnika taśmowego 332
-
Łącznik taśmociągów 322
-
Wyświetlacz 315
-
Podwójna rampa (1 m) 300
-
Fundament (1 m) 293
-
Pół fundament (1 m) 281
-
Gniazdo ścienne kl. 1 278
-
Taśmociąg kl. 1 276
-
Rurociąg kl. 1 267
-
Wspornik taśmociągu 242
-
Mały metalowy filar 229
-
Prosta ściana (1 m) 221
-
Dach (1 m) 216
-
Prosta ściana (1 m) 210
-
Podnośnik taśmowy kl. 1 207
-
Prosta ściana (1 m) 203
-
Pochylona wklęsła ściana (1 m) 196
-
Ściana rampy (1 m) 188
-
Inteligentny rozdzielacz 179
-
Rurociąg kl. 1 uproszczony 161
-
Duży metalowy filar 153
-
Podwójna rampa (1 m) 152
-
Odwrócona ściana rampy (1 m) 148
-
Pochylona narożna ściana (1 m) 134
-
Kontener przemysłowy 129
-
Fundament (1 m) 118
-
Płaski dach 114
-
Sufitowy uchwyt taśmociągu 111
-
Nowoczesna balustrada 105
-
Ścienna podpora hipertuby 98
-
Duży betonowy filar 96
-
Hipertuba 93
-
Ściana rampy (1 m) 88
-
Dach (1 m) 86
-
Pochylona narożna ściana (1 m) 86
-
Podpora rurociągu 85
-
Mały betonowy filar 84
-
Pochylona ściana (1 m) 82
-
Lampa sufitowa 79
-
Uchwyt ścienny na taśmociąg 71
-
Zbiornik 70
-
Wejście do hipertuby 69
-
Odwrócona ściana rampy (1 m) 68
-
Rozdzielacz taśmociągu 67
-
Ścienny wspornik rurociągu 64
-
Automatyczna brama 60
-
Taśmociąg kl. 3 58
-
Przepust podłogowy rurociągu 58
-
Skrzyżowanie rurociągów 58
-
Pół fundament (1 m) 45
-
Dach (1 m) 44
-
Pochylona ściana (1 m) 44
-
Rampa (1 m) 43
-
Reflektor naścienny 43
-
Odwrócona ściana rampy (1 m) 42
-
Stacja drona 42
-
Płaski dach 41
-
Kładka z rampą 40
-
Podnośnik taśmowy kl. 2 40
-
Kwadratowy wyświetlacz (1 m) 37
-
Pół fundament (1 m) 33
-
Przepust ścienny rurociągu 33
-
Pół fundament (1 m) 30
-
Taśmociąg kl. 2 29
-
Płaski dach 28
-
Wzmocnione okno 28
-
Programowalny rozdzielacz 28
-
Nakładany wspornik taśmociągu 25
-
Podpora hipertuby 25
-
Dach (1 m) 24
-
Podwójny łącznik belki 23
-
Rampa narożnikowa w górę (1 m) 22
-
Dach (1 m) 22
-
Kontener 22
-
Ściana na taśmociąg x 2 20
-
Okno z pełną ramą 20
-
Przepust podłogowy hipertuby 20
-
Kładka prosta 19
-
Podwójna rampa (1 m) 18
-
Ściana rampy (1 m) 18
-
Kładka ze skrętem 18
-
Podnośnik taśmowy kl. 3 18
-
Rafineria 17
-
Taśmociąg kl. 4 17
-
Dach (1 m) 16
-
Dach (1 m) 16
-
Pakowacz 16
-
Konstruktor 15
-
Podwójna rampa (1 m) 14
-
Odwrócona ściana rampy (1 m) 14
-
Odwrócona ściana rampy (1 m) 14
-
Nakładana podstawa rurociągu 14
-
Przepust ścienny hipertuby 14
-
Podwójne gniazdo ścienne kl. 1 14
-
Etykieta (2 m) 13
-
Monter 13
-
Przedłużenie wewnętrznego narożnika (1 m) 12
-
Ściana rampy (1 m) 12
-
Ściana na taśmociąg x 3 11
-
Szklana rama fundamentu 10
-
Pół fundament (1 m) 10
-
Panel kontrolny świateł 10
-
Ściana rampy (1 m) 10
-
Rampa (1 m) 9
-
Fundament (1 m) 9
-
Otwór ścienny na bramę 9
-
Ściana rampy (1 m) 9
-
Słup energetyczny kl. 1 9
-
Odwrócona rampa (1 m) 8
-
Pompa rurociągu kl. 2 7
-
Wieża energetyczna 7
-
Dach (1 m) 6
-
Ściana na taśmociąg x 1 6
-
Ściana na taśmociąg x 2 6
-
Ściana z drzwiami pośrodku 5
-
Ściana na taśmociąg x 1 5
-
Ściana rampy (1 m) 5
-
Rampa narożnikowa w dół (1 m) 4
-
Narożny, zewnętrzny dach (1 m) 4
-
Ściana rampy (1 m) 4
-
Kładka ze schodami 4
-
Niszczarka AWESOME 4
-
Peron towarowy 4
-
Odwrócona rampa (1 m) 3
-
Ściana rampy (1 m) 3
-
Odwrócona ściana rampy (1 m) 3
-
Blender 3
-
Producent 3
-
Słup energetyczny kl. 3 3
-
Słup energetyczny kl. 2 3
-
Fundament (1 m) 2
-
Rampa (1 m) 2
-
Rampa narożnikowa w dół (1 m) 2
-
Rampa narożnikowa w górę (1 m) 2
-
Rampa (1 m) 2
-
Dach (1 m) 2
-
Narożny, zewnętrzny dach (1 m) 2
-
Wspornik belki 2
-
Odwrócona ściana rampy (1 m) 2
-
Pochylona wklęsła ściana (1 m) 2
-
Otwór ścienny na bramę 2
-
Ściana z drzwiami z boku 2
-
Przemysłowa balustrada 2
-
Etykieta (3 m) 2
-
Ekstraktor studni zasobów 2
-
Pompa wodna 2
-
Piec hutniczy 2
-
Podnośnik taśmowy kl. 4 2
-
Odwrócony narożnik w górę (1 m) 1
-
Narożny, zewnętrzny dach (1 m) 1
-
Ściana z drzwiami z boku 1
-
Otwór ścienny na bramę 1
-
Pochylona narożna ściana (1 m) 1
-
Ściana na taśmociąg x 3 1
-
Odwrócona ściana rampy (1 m) 1
-
Ściana z drzwiami z boku 1
-
Ściana z drzwiami pośrodku 1
-
Drabina 1
-
Warsztat 1
-
Pracownia wyposażenia 1
-
Kreator schematów kl. 1 1
-
Uszczelniacz studni zasobów 1
-
Odskocznia 1
-
Żelowe lądowisko 1
-
Pompa rurociągu kl. 1 1
-
Stacja kolejowa 1
-
Sygnał bloku 1
-
Przełącznik zasilania 1
-
Beton 68 033
-
Stalowa belka 24 016
-
Kryształ kwarcu 17 010
-
Żelazna płyta 15 621
-
Miedziana blacha 14 069
-
Belka żelbetowa 8 223
-
Szybkowód 5 207
-
Wzmocniona żelazna płyta 5 114
-
Blacha z duraluminium 4 680
-
Stalowa rura 3 884
-
Żelazny pręt 3 318
-
Przewód 3 271
-
Oscylator kryształowy 3 001
-
Aluminiowa obudowa 2 270
-
Plastik 1 564
-
Kabel 1 474
-
Krzemionka 1 190
-
Ciężka rama modularna 930
-
Złącze wysokiej prędkości 849
-
Wirnik 712
-
Radiowa jednostka kontrolna 430
-
Rama modularna 425
-
Ogranicznik SI 350
-
Silnik 344
-
Guma 269
-
Biomasa 200
-
Komputer 87
-
Yokmosho - 2 kwi 2024, 02:09:15
Darth Bludgeon, I tested the megaprint out to look for any glitching on the smart splitters moving parts to their respective storage bins, all were behaving normally. When parts are filtered, they go through a priority load order. First priority (where applicable) is to load the production machines for ammo production, second would be to fill up the drones and drone ports, then they will start filling up the storage bins.
-
Darth Bludgeon - 25 mar 2024, 12:19:07
Really pretty build, lots of neat stuff... if it worked. Doesn't, for me; got supplies halfway hooked up and realized everything I was loading from the train station was going straight to the sinks. The peripheral chains seemed to work (bio-fuel, slug processing, color cartridges); coal distribution worked (brought that in by drone), batteries filled all the drone ports (but none appeared in the containers) - in fact, nothing appeared in the container area regardless of what or where it was loaded. Nice design, though.
-
-XAZU- the earthdweller - 10 gru 2023, 02:24:43
aaahhh!! i just found the blueprint designer area! so sick!! this is definitely a "i beat the game and don't wanna build the perfect base myself" kinda print. i like it! your architectural sense is leaps and bounds ahead of mine! lol good job!
-
-XAZU- the earthdweller - 10 gru 2023, 02:21:38
wow! what a project! i liked the shooting range!
im still touring it and im sure ive missed a couple of spots but this place is HUGE! theres so much space! very straight forward storage solution tho! and the drone hive idea is power hungry but effective i bet!
ive been peeking around the logistics and it looks stout! 4 lines of incoming items at mk5 speeds!
-
Yokmosho - 9 gru 2023, 03:41:40
Spacepup, I'm humbled by your use of Project P.I.O.N.E.E.R in a YouTube video. I can't say that I've ever expected any of my creations to spawn a video project.
-
spacepup - 7 gru 2023, 00:52:59
i made a short video on this if you wanna check it out! ( https://www.youtube.com/watch?v=L8ygO8Cy938 )