Project P.I.O.N.E.E.R.
Welcome to the Planetary Initiative Organization Nexus/ Engineered Economical Rocket, or Project P.I.O.N.E.E.R. I took a bit of inspiration from the Star Carrier book series by Ian Douglas to make a spaceship themed central hub; utilizing the mushroom cap design used for near light speed travel radiation shielding for the bulk of the factory.
The whole base is more than just a storage hub. There is a hypertube system and bridge that can quickly move a pioneer from the grassy canyon to the upper plateau. There are also 4 P.P.C's (Pioneer Projectile Cannons) utilizing B.E.L.T. loading (Biological Equipment Loading Transjector) capable of sending pioneer nearly anywhere on the map with jet pack/parachute creativity. There is also a prototyping holodeck off of the armory
There is also a full manufacturing setup for processing biomass, slugs, packaged fuel, and ammo/nobelisk production. Production utilizes parts from storage, along with piping in the needed oil and water. You will need to create drone ports to fly in 4 resources:
Coal 120 PPM Sulfur 120 PPM Bauxite: 120 PPM Uranium: 20 PPM
But the best part is the Rapid Part Delivery System. I have a drone port mapped to every part type along with 2 additional drones for use as ammo and supply drops. These drone ports are also connected to the sorting bus; so you can have the drones bring back unneeded parts, wood, leaves, ect. for storage and processing. It takes around 2 minutes at most for any parts to deliver by drone once you have it mapped to a field drone port.
---I've received a few complaints about the storage not showing any parts, which is true only when you first start loading parts. When parts are filtered, they go through a priority load order. First priority (where applicable) is to load the production machines for ammo production, second would be to fill up the drones and drone ports, then they will start filling up the storage bins. Please keep this in mind that it will take time for parts to show in the storage bins, but they will likely show up for drone delivery almost right away.
***For obvious reasons, do not feed WIP items into the sorting bus, the entire thing will end up jamming. I do have filters set up just before the sinks on the sorting line to pull unsinkable items into a storage container, as long as the items can be selected in programmable splitters
Please drop me a line at Yokmosho on Discord with any comments or bugs/issues found
Updates/fixes: 12-3: connection issue before final sinks fixed 12-8: sped up uranium belt to nuke nobelisk production so uranium doesn't back up in the drone port storage and lead to massive amounts of radiation in the base. Also rebuilt the hypertubbe entrance and landing zone at the bottom of the rocket to prevent the "relativistic death cannon" when using the hypertube from the top. 12-11: reversed fill order on packagers to prevent water overflow from taking all containers and stalling. Also replaced a missing merger near the end of the main feed bus that led to an eventual overflow
- Antall gjenstander 39 618
- Koordinater −25 / 85 038
- Lim inn på originalstedet Yes
- Kategorier Architecture Complete factory Interior decorations Exterior decorations Pipes system UPDATE 8
-
Vurdering
3 / 5
- Spillversjon 269 772
- Forfatter Yokmosho
- Last ned (1 047x) Last ned
- Filstørrelse 2٫13 MB
- Lastet opp den 3. des. 2023, 16:12:18
- Sist oppdatert den 12. des. 2023, 01:21:33
-
Standard FICSIT-vegg 4m
5 084
-
Standard FICSIT-vegg 4m
3 055
-
FICSIT-fundament 1m
2 937
-
Rammefundament
1 579
-
Transportbånd Mk.5
1 472
-
Stålbjelke
1 267
-
Standard metallvegg 4m
1 166
-
Tittelskilt 4m
1 070
-
Standard FICSIT-vegg 4m
823
-
Bjelketilkobling
813
-
Portrettskilt
792
-
Liten reklametavle
696
-
Skråstilt FICSIT-vegg 8m
670
-
Strømlinje
665
-
FICSIT-fundament 1m
645
-
Rammegulv
579
-
Transportbåndheis Mk.5
529
-
Firkantet skilt 1m
474
-
Firkantet skilt 0,5m
463
-
Stor reklametavle
461
-
Rammevegg
459
-
FICSIT-fundament 1m
457
-
Malt bjelke
448
-
Skråstilt FICSIT-hjørnevegg 8m
446
-
Skråstilt FICSIT-vegg 8m
441
-
Standard metallvegg 4m
403
-
Trekantede vindusrammer
393
-
Gulvhull for transportbåndheis
332
-
Transportbånd-samler
322
-
Visningsskilt
315
-
Dobbel FICSIT-rampe 2m
300
-
FICSIT-fundament 1m
293
-
Halvt FICSIT-fundament 1m
281
-
Veggpol Mk.1
278
-
Transportbånd Mk.1
276
-
Rørledning Mk.1
267
-
Transportbåndstolpe
242
-
Liten metallpilar
229
-
Standard FICSIT-vegg 1m
221
-
Metalltak 1m
216
-
Standard FICSIT-vegg 1m
210
-
Transportbåndheis Mk.1
207
-
Standard FICSIT-vegg 1m
203
-
Skråstilt konkav vegg 4m
196
-
Triangel-FICSIT-vegg 8m
188
-
Smartsplitter
179
-
Rørledning Mk.1 (Ingen indikator)
161
-
Stor metallpilar
153
-
Dobbel FICSIT-rampe 2m
152
-
Invertert triangel-FICSIT-vegg 8m
148
-
Skråstilt FICSIT-hjørnevegg 4m
134
-
Industriell lagringsconteiner
129
-
FICSIT-fundament 1m
118
-
Flatt metalltak
114
-
Båndstøtte for himling
111
-
Moderne rekkverk
105
-
Hyperrør-veggstøtte
98
-
Stor betongpilar
96
-
Hyperrør
93
-
Triangel-FICSIT-vegg 4m
88
-
Tak 4m
86
-
Skråstilt FICSIT-hjørnevegg 4m
86
-
Rørledningstolpe
85
-
Liten betongpilar
84
-
Standard metallvegg 4m
82
-
Taklampe
79
-
Båndstøtte for vegg
71
-
Væskebuffer
70
-
Hyperrørinngang
69
-
Invertert triangel-FICSIT-vegg 4m
68
-
Transportbånd-splitter
67
-
Rørledningstøtte for vegg
64
-
Automatisert port
60
-
Transportbånd Mk.3
58
-
Gulvhull for rørledning
58
-
Rørkryss
58
-
Halvt FICSIT-fundament 1m
45
-
Metalltak 2m
44
-
Skråstilt FICSIT-vegg 8m
44
-
FICSIT-rampe 3m
43
-
Veggmontert flomlys
43
-
Invertert triangel-FICSIT-vegg 1m
42
-
Droneplatform
42
-
Flatt metalltak
41
-
Plattformrampe
40
-
Transportbåndheis Mk.2
40
-
Firkantet skilt 2m
37
-
Halvt FICSIT-fundament 1m
33
-
Rørledningshull i vegg
33
-
Halvt FICSIT-fundament 1m
30
-
Transportbånd Mk.2
29
-
Flatt metalltak
28
-
Forsterket vindu i stålvegg
28
-
Programmerbar Splitter
28
-
Stabelbar båndstøtte
25
-
Hyperrørstøtte
25
-
Metalltak 2m
24
-
Dobbel bjelketilkobling
23
-
Oppgående FICSIT-hjørnerampe 1m
22
-
Metalltak 1m
22
-
Lagringscontainer
22
-
Transportbånd-FICSIT-vegg x2
20
-
Helglass-vindu
20
-
Hyperrørgulvhull
20
-
Platform rett
19
-
Dobbel FICSIT-rampe 4m
18
-
Triangel-FICSIT-vegg 1m
18
-
Plattformhjørne
18
-
Transportbåndheis Mk.3
18
-
Raffineri
17
-
Transportbånd Mk.4
17
-
Metalltak 1m
16
-
Metalltak 2m
16
-
Tapper
16
-
Konstruktør
15
-
Dobbel FICSIT-rampe 8m
14
-
Invertert triangel-FICSIT-vegg 2m
14
-
Invertert triangel-FICSIT-vegg 1m
14
-
Stabelbar rørstøtte
14
-
Hyperrørvegghull
14
-
Dobbel veggpol Mk.1
14
-
Tittelskilt 2m
13
-
Montør
13
-
Horisontalt FICSIT-kvartrør 1m
12
-
Triangel-FICSIT-vegg 1m
12
-
Transportbånd-FICSIT-vegg x3
11
-
Glassramme-fundament
10
-
Halvt FICSIT-fundament 1m
10
-
Kontrollpanel for lys
10
-
Triangel-FICSIT-vegg 8m
10
-
FICSIT-rampe 1m
9
-
FICSIT-fundament 2m
9
-
Stålvegg med portåpning
9
-
Triangel-FICSIT-vegg 4m
9
-
Strømstolpe Mk.1
9
-
Invertert FICSIT-rampe 1m
8
-
Rørledningspumpe Mk.2
7
-
Kraftmast
7
-
Tak 4m
6
-
Transportbånd-FICSIT-vegg x1
6
-
Transportbånd-FICSIT-vegg x2
6
-
Stålvegg med dør midt i
5
-
Transportbånd-FICSIT-vegg x1
5
-
Triangel-FICSIT-vegg 4m
5
-
Nedgående FICSIT-hjørnerampe 2m
4
-
Grad-FICSIT-tak 2m
4
-
Triangel-FICSIT-vegg 2m
4
-
Plattformtrapp
4
-
EKSPERT-kvern
4
-
Kontainerterminal
4
-
Invertert FICSIT-rampe 2m
3
-
Triangel-FICSIT-vegg 2m
3
-
Invertert triangel-FICSIT-vegg 4m
3
-
Blander
3
-
Produsent
3
-
Strømstolpe Mk.3
3
-
Strømstolpe Mk.2
3
-
FICSIT-fundament 4m
2
-
FICSIT-rampe 3m
2
-
Nedgående FICSIT-hjørnerampe 4m
2
-
Oppgående FICSIT-hjørnerampe 4m
2
-
FICSIT-rampe 2m
2
-
Tak 4m
2
-
Grad-FICSIT-tak 4m
2
-
Bjelkefundament
2
-
Invertert triangel-FICSIT-vegg 4m
2
-
Skråstilt konkav vegg 4m
2
-
Stålvegg med portåpning
2
-
Stålvegg med dør til siden
2
-
Industrielt rekkverk
2
-
Tittelskilt 3m
2
-
Ressursbrønnutvinner
2
-
Vannsamler
2
-
Smeltere
2
-
Transportbåndheis Mk.4
2
-
Invertert oppgående FICSIT-hjørnerampe 1m
1
-
Grad-FICSIT-tak 4m
1
-
Stålvegg med dør til siden
1
-
Stålvegg med portåpning
1
-
Skråstilt FICSIT-hjørnevegg 4m
1
-
Transportbånd-FICSIT-vegg x3
1
-
Invertert triangel-FICSIT-vegg 1m
1
-
Stålvegg med dør til siden
1
-
Stålvegg med dør midt i
1
-
Stige
1
-
Arbeidsbenk
1
-
Utstyrsverksted
1
-
Byggeplanmakeren
1
-
Ressursbrønn-trykksetter
1
-
Sprettplate
1
-
U-gelé landingsplattform
1
-
Rørledningspumpe Mk.1
1
-
Jernbanestasjon
1
-
Seksjonssignal
1
-
Strømbryter
1
-
Betong
63 202
-
Stålbjelke
17 979
-
Kvartskrystall
17 010
-
Kobbertynnplate
14 070
-
Jernplate
9 536
-
Innkapslet Stålbjelke
8 251
-
Kvikktråd
5 207
-
Forsterket jernplate
5 114
-
Korrosjonsbestandig aluminiumsplate
4 630
-
Stålrør
3 884
-
Jernstav
3 318
-
Krystalloscillator
3 001
-
Kobbertråd
2 871
-
Aluminiumkabinet
2 250
-
Kabel
1 599
-
Tung modulær ramme
956
-
Silika
882
-
Høyhastighetstilkobling
849
-
Rotor
712
-
Radiokontrollenhet
435
-
Plast
386
-
Modulær ramme
365
-
Motor
357
-
Gummi
219
-
KI-begrense
210
-
Biomasse
200
-
Superdatamaskin
28
-
Datamaskin
16
-
Kretskort
2
-
Yokmosho - 2. apr. 2024, 02:09:15
Darth Bludgeon, I tested the megaprint out to look for any glitching on the smart splitters moving parts to their respective storage bins, all were behaving normally. When parts are filtered, they go through a priority load order. First priority (where applicable) is to load the production machines for ammo production, second would be to fill up the drones and drone ports, then they will start filling up the storage bins.
-
Darth Bludgeon - 25. mar. 2024, 12:19:07
Really pretty build, lots of neat stuff... if it worked. Doesn't, for me; got supplies halfway hooked up and realized everything I was loading from the train station was going straight to the sinks. The peripheral chains seemed to work (bio-fuel, slug processing, color cartridges); coal distribution worked (brought that in by drone), batteries filled all the drone ports (but none appeared in the containers) - in fact, nothing appeared in the container area regardless of what or where it was loaded. Nice design, though.
-
-XAZU- the earthdweller - 10. des. 2023, 02:24:43
aaahhh!! i just found the blueprint designer area! so sick!! this is definitely a "i beat the game and don't wanna build the perfect base myself" kinda print. i like it! your architectural sense is leaps and bounds ahead of mine! lol good job!
-
-XAZU- the earthdweller - 10. des. 2023, 02:21:38
wow! what a project! i liked the shooting range!
im still touring it and im sure ive missed a couple of spots but this place is HUGE! theres so much space! very straight forward storage solution tho! and the drone hive idea is power hungry but effective i bet!
ive been peeking around the logistics and it looks stout! 4 lines of incoming items at mk5 speeds!
-
Yokmosho - 9. des. 2023, 03:41:40
Spacepup, I'm humbled by your use of Project P.I.O.N.E.E.R in a YouTube video. I can't say that I've ever expected any of my creations to spawn a video project.
-
spacepup - 7. des. 2023, 00:52:59
i made a short video on this if you wanna check it out! ( https://www.youtube.com/watch?v=L8ygO8Cy938 )