Project P.I.O.N.E.E.R.
Welcome to the Planetary Initiative Organization Nexus/ Engineered Economical Rocket, or Project P.I.O.N.E.E.R. I took a bit of inspiration from the Star Carrier book series by Ian Douglas to make a spaceship themed central hub; utilizing the mushroom cap design used for near light speed travel radiation shielding for the bulk of the factory.
The whole base is more than just a storage hub. There is a hypertube system and bridge that can quickly move a pioneer from the grassy canyon to the upper plateau. There are also 4 P.P.C's (Pioneer Projectile Cannons) utilizing B.E.L.T. loading (Biological Equipment Loading Transjector) capable of sending pioneer nearly anywhere on the map with jet pack/parachute creativity. There is also a prototyping holodeck off of the armory
There is also a full manufacturing setup for processing biomass, slugs, packaged fuel, and ammo/nobelisk production. Production utilizes parts from storage, along with piping in the needed oil and water. You will need to create drone ports to fly in 4 resources:
Coal 120 PPM Sulfur 120 PPM Bauxite: 120 PPM Uranium: 20 PPM
But the best part is the Rapid Part Delivery System. I have a drone port mapped to every part type along with 2 additional drones for use as ammo and supply drops. These drone ports are also connected to the sorting bus; so you can have the drones bring back unneeded parts, wood, leaves, ect. for storage and processing. It takes around 2 minutes at most for any parts to deliver by drone once you have it mapped to a field drone port.
---I've received a few complaints about the storage not showing any parts, which is true only when you first start loading parts. When parts are filtered, they go through a priority load order. First priority (where applicable) is to load the production machines for ammo production, second would be to fill up the drones and drone ports, then they will start filling up the storage bins. Please keep this in mind that it will take time for parts to show in the storage bins, but they will likely show up for drone delivery almost right away.
***For obvious reasons, do not feed WIP items into the sorting bus, the entire thing will end up jamming. I do have filters set up just before the sinks on the sorting line to pull unsinkable items into a storage container, as long as the items can be selected in programmable splitters
Please drop me a line at Yokmosho on Discord with any comments or bugs/issues found
Updates/fixes: 12-3: connection issue before final sinks fixed 12-8: sped up uranium belt to nuke nobelisk production so uranium doesn't back up in the drone port storage and lead to massive amounts of radiation in the base. Also rebuilt the hypertubbe entrance and landing zone at the bottom of the rocket to prevent the "relativistic death cannon" when using the hypertube from the top. 12-11: reversed fill order on packagers to prevent water overflow from taking all containers and stalling. Also replaced a missing merger near the end of the main feed bus that led to an eventual overflow
- Items count 39.618
- Coordinates -25 / 85.038
- Only paste on original location Yes
- Categorie Architecture Complete factory Interior decorations Exterior decorations Pipes system UPDATE 8
- Created on 03/dic/2023 16:12:18
- Last updated on 12/dic/2023 01:21:33
-
Parete semplice (4 m)
5.084
-
Parete semplice (4 m)
3.055
-
Fondamenta (1 m)
2.937
-
Telaio di fondazione
1.579
-
Nastro trasportatore Mk.5
1.472
-
Trave di metallo
1.267
-
Parete Inclinata (4 m)
1.166
-
Cartello etichetta (4m)
1.070
-
Parete semplice (4 m)
823
-
Connettore per travi
813
-
Cartello verticale
792
-
Tabellone piccolo
696
-
Parete Inclinata (8 m)
670
-
Linea elettrica
665
-
Fondamenta (1 m)
645
-
Griglia a pavimento
579
-
Nastro trasportatore verticale Mk.5
529
-
Cartello quadrato (1 m)
474
-
Cartello quadrato (0.5 m)
463
-
Tabellone grande
461
-
Telaio di parete
459
-
Fondamenta (1 m)
457
-
Trave verniciata
448
-
Parete ad Angolo Inclinata (8 m)
446
-
Parete Inclinata (8 m)
441
-
Parete Inclinata (4 m)
403
-
Finestra con telaio a esagoni
393
-
Foro da pavimento per trasportatore verticale
332
-
Unificatore di nastri trasportatori
322
-
Cartello espositore
315
-
Rampa Doppia(2 m)
300
-
Fondamenta (1 m)
293
-
Mezze Fondamenta (1 m)
281
-
Presa a parete Mk.1
278
-
Nastro trasportatore Mk.1
276
-
Conduttura Mk.1
267
-
Palo per nastro trasportatore
242
-
Pilastro di metallo piccolo
229
-
Parete semplice (1 m)
221
-
Tetto (1 m)
216
-
Parete semplice (1 m)
210
-
Nastro trasportatore verticale Mk.1
207
-
Parete semplice (1 m)
203
-
Parete Concava Inclinata (4 m)
196
-
Rampa (8 m)
188
-
Separatore intelligente
179
-
Conduttura liscia Mk.1
161
-
Pilastro di metallo grande
153
-
Rampa Doppia(2 m)
152
-
Rampa invertita (8 m)
148
-
Parete ad Angolo Inclinata (4 m)
134
-
Container di stoccaggio industriale
129
-
Fondamenta (1 m)
118
-
Tetto piatto
114
-
Supporto a soffitto per nastro trasportatore
111
-
Ringhiera moderna
105
-
Supporto da parete per ipertubi
98
-
Pilastro di calcestruzzo grande
96
-
Ipertubo
93
-
Rampa (4 m)
88
-
Tetto (4 m)
86
-
Parete ad Angolo Inclinata (4 m)
86
-
Supporto per condutture
85
-
Pilastro di calcestruzzo piccolo
84
-
Parete Inclinata (4 m)
82
-
Illuminazione a soffitto
79
-
Supporto da parete per trasportatori
71
-
Cisterna per liquidi
70
-
Ingresso ipertubi
69
-
Rampa invertita (4 m)
68
-
Separatore di nastri trasportatori
67
-
Supporto da parete per condotte
64
-
Cancello automatico
60
-
Nastro trasportatore Mk.3
58
-
Foro da pavimento per conduttura
58
-
Giunzione per condutture
58
-
Mezze Fondamenta (1 m)
45
-
Tetto (2 m)
44
-
Parete Inclinata (8 m)
44
-
Rampa (4 m)
43
-
Faro a parete
43
-
Rampa invertita (1 m)
42
-
Eliporto
42
-
Tetto piatto
41
-
Rampa di passerelle industriali
40
-
Nastro trasportatore verticale Mk.2
40
-
Cartello quadrato (2 m)
37
-
Mezze Fondamenta (1 m)
33
-
Foro da parete per condutture
33
-
Mezze Fondamenta (1 m)
30
-
Nastro trasportatore Mk.2
29
-
Tetto piatto
28
-
Finestra rinforzata
28
-
Separatore programmabile
28
-
Palo per nastro trasportatore impilabile
25
-
Supporto per ipertubi
25
-
Tetto (2 m)
24
-
Doppio connettore per travi
23
-
Rampa Angolare in Salita (1 m)
22
-
Tetto (1 m)
22
-
Container di stoccaggio
22
-
Parete con supporti per nastri trasportatori x2
20
-
Finestra con telaio senza bordi
20
-
Foro per ipertubi da pavimento
20
-
Passerella industriale dritta
19
-
Rampa Doppia(4 m)
18
-
Rampa (1 m)
18
-
Angolo di passerelle industriali
18
-
Nastro trasportatore verticale Mk.3
18
-
Raffineria
17
-
Nastro trasportatore Mk.4
17
-
Tetto (1 m)
16
-
Tetto (2 m)
16
-
Imballatrice
16
-
Costruttore
15
-
Rampa Doppia(8 m)
14
-
Rampa invertita (2 m)
14
-
Rampa invertita (1 m)
14
-
Supporto per condutture impilabile
14
-
Foro da parete per ipertubi
14
-
Presa da parete doppia Mk.1
14
-
Cartello etichetta (2m)
13
-
Assemblatore
13
-
Estensione d'Angolo Interna (1 m)
12
-
Rampa (1 m)
12
-
Parete con supporti per nastri trasportatori x3
11
-
Telaio di fondazione in vetro
10
-
Mezze Fondamenta (1 m)
10
-
Pannello di controllo delle luci
10
-
Rampa (8 m)
10
-
Rampa (1 m)
9
-
Fondamenta (2 m)
9
-
Parete con varco di accesso
9
-
Rampa (4 m)
9
-
Palo elettrico Mk.1
9
-
Rampa invertita (1 m)
8
-
Pompa di conduttura Mk.2
7
-
Traliccio
7
-
Tetto (4 m)
6
-
Parete con supporti per nastri trasportatori x1
6
-
Parete con supporti per nastri trasportatori x2
6
-
Parete con porta centrale
5
-
Parete con supporti per nastri trasportatori x1
5
-
Rampa (4 m)
5
-
Rampa Angolare in Discesa (2 m)
4
-
Tetto ad Angolo Esterno (2 m)
4
-
Rampa (2 m)
4
-
Scale di passerelle industriali
4
-
Trasmutatore AWESOME
4
-
Piattaforma merci
4
-
Rampa invertita (2 m)
3
-
Rampa (2 m)
3
-
Rampa invertita (4 m)
3
-
Miscelatore
3
-
Produttore
3
-
Palo elettrico Mk.3
3
-
Palo elettrico Mk.2
3
-
Fondamenta (4 m)
2
-
Rampa (4 m)
2
-
Rampa Angolare in Discesa (4 m)
2
-
Rampa Angolare in Salita (4 m)
2
-
Rampa (2 m)
2
-
Tetto (4 m)
2
-
Tetto ad Angolo Esterno (4 m)
2
-
Trave di supporto
2
-
Rampa invertita (4 m)
2
-
Parete Concava Inclinata (4 m)
2
-
Parete con varco di accesso
2
-
Parete con porta a lato
2
-
Ringhiera industriale
2
-
Cartello etichetta (3m)
2
-
Estrattore per pozzo di risorse
2
-
Estrattore d\'acqua
2
-
Fonderia
2
-
Nastro trasportatore verticale Mk.4
2
-
Angolo Roveciato in Alto (1 m)
1
-
Tetto ad Angolo Esterno (4 m)
1
-
Parete con porta a lato
1
-
Parete con varco di accesso
1
-
Parete ad Angolo Inclinata (4 m)
1
-
Parete con supporti per nastri trasportatori x3
1
-
Rampa invertita (1 m)
1
-
Parete con porta a lato
1
-
Parete con porta centrale
1
-
Scala a pioli
1
-
Banco da lavoro
1
-
Officina
1
-
Progettatore Mk.1
1
-
Pressurizzatore per pozzi di risorse
1
-
Piattaforma di lancio
1
-
Piattaforma d\'atterraggio con gel
1
-
Pompa di conduttura Mk.1
1
-
Stazione ferroviaria
1
-
Segnale di blocco
1
-
Interruttore elettrico
1
-
Calcestruzzo
68.033
-
Trave d'acciaio
24.016
-
Cristallo di quarzo
17.010
-
Piastra di ferro
15.621
-
Lamiera di rame
14.069
-
Trave di cemento armato
8.223
-
Filorapido
5.207
-
Piastra di ferro rinforzata
5.114
-
Lamiera d\'alluminio Alclad
4.680
-
Tubo di acciaio
3.884
-
Barra di ferro
3.318
-
Filo
3.271
-
Oscillatore al cristallo
3.001
-
Contenitore di alluminio
2.270
-
Plastica
1.564
-
Cavo
1.474
-
Silice
1.190
-
Telaio modulare pesante
930
-
Connettore ad alta velocità
849
-
Rotore
712
-
Unità di controllo radio
430
-
Telaio modulare
425
-
Limitatore di IA
350
-
Motore
344
-
Gomma
269
-
Biomassa
200
-
Computer
87
-
Yokmosho - 02/apr/2024 02:09:15
Darth Bludgeon, I tested the megaprint out to look for any glitching on the smart splitters moving parts to their respective storage bins, all were behaving normally. When parts are filtered, they go through a priority load order. First priority (where applicable) is to load the production machines for ammo production, second would be to fill up the drones and drone ports, then they will start filling up the storage bins.
-
Darth Bludgeon - 25/mar/2024 12:19:07
Really pretty build, lots of neat stuff... if it worked. Doesn't, for me; got supplies halfway hooked up and realized everything I was loading from the train station was going straight to the sinks. The peripheral chains seemed to work (bio-fuel, slug processing, color cartridges); coal distribution worked (brought that in by drone), batteries filled all the drone ports (but none appeared in the containers) - in fact, nothing appeared in the container area regardless of what or where it was loaded. Nice design, though.
-
-XAZU- the earthdweller - 10/dic/2023 02:24:43
aaahhh!! i just found the blueprint designer area! so sick!! this is definitely a "i beat the game and don't wanna build the perfect base myself" kinda print. i like it! your architectural sense is leaps and bounds ahead of mine! lol good job!
-
-XAZU- the earthdweller - 10/dic/2023 02:21:38
wow! what a project! i liked the shooting range!
im still touring it and im sure ive missed a couple of spots but this place is HUGE! theres so much space! very straight forward storage solution tho! and the drone hive idea is power hungry but effective i bet!
ive been peeking around the logistics and it looks stout! 4 lines of incoming items at mk5 speeds!
-
Yokmosho - 09/dic/2023 03:41:40
Spacepup, I'm humbled by your use of Project P.I.O.N.E.E.R in a YouTube video. I can't say that I've ever expected any of my creations to spawn a video project.
-
spacepup - 07/dic/2023 00:52:59
i made a short video on this if you wanna check it out! ( https://www.youtube.com/watch?v=L8ygO8Cy938 )