Project P.I.O.N.E.E.R.
Welcome to the Planetary Initiative Organization Nexus/ Engineered Economical Rocket, or Project P.I.O.N.E.E.R. I took a bit of inspiration from the Star Carrier book series by Ian Douglas to make a spaceship themed central hub; utilizing the mushroom cap design used for near light speed travel radiation shielding for the bulk of the factory.
The whole base is more than just a storage hub. There is a hypertube system and bridge that can quickly move a pioneer from the grassy canyon to the upper plateau. There are also 4 P.P.C's (Pioneer Projectile Cannons) utilizing B.E.L.T. loading (Biological Equipment Loading Transjector) capable of sending pioneer nearly anywhere on the map with jet pack/parachute creativity. There is also a prototyping holodeck off of the armory
There is also a full manufacturing setup for processing biomass, slugs, packaged fuel, and ammo/nobelisk production. Production utilizes parts from storage, along with piping in the needed oil and water. You will need to create drone ports to fly in 4 resources:
Coal 120 PPM Sulfur 120 PPM Bauxite: 120 PPM Uranium: 20 PPM
But the best part is the Rapid Part Delivery System. I have a drone port mapped to every part type along with 2 additional drones for use as ammo and supply drops. These drone ports are also connected to the sorting bus; so you can have the drones bring back unneeded parts, wood, leaves, ect. for storage and processing. It takes around 2 minutes at most for any parts to deliver by drone once you have it mapped to a field drone port.
---I've received a few complaints about the storage not showing any parts, which is true only when you first start loading parts. When parts are filtered, they go through a priority load order. First priority (where applicable) is to load the production machines for ammo production, second would be to fill up the drones and drone ports, then they will start filling up the storage bins. Please keep this in mind that it will take time for parts to show in the storage bins, but they will likely show up for drone delivery almost right away.
***For obvious reasons, do not feed WIP items into the sorting bus, the entire thing will end up jamming. I do have filters set up just before the sinks on the sorting line to pull unsinkable items into a storage container, as long as the items can be selected in programmable splitters
Please drop me a line at Yokmosho on Discord with any comments or bugs/issues found
Updates/fixes: 12-3: connection issue before final sinks fixed 12-8: sped up uranium belt to nuke nobelisk production so uranium doesn't back up in the drone port storage and lead to massive amounts of radiation in the base. Also rebuilt the hypertubbe entrance and landing zone at the bottom of the rocket to prevent the "relativistic death cannon" when using the hypertube from the top. 12-11: reversed fill order on packagers to prevent water overflow from taking all containers and stalling. Also replaced a missing merger near the end of the main feed bus that led to an eventual overflow
- Anzahl der Gegenstände 39.618
- Koordinaten -25 / 85.038
- Nur am ursprünglichen Ort einfügen Yes
- Kategorien Architecture Complete factory Interior decorations Exterior decorations Pipes system UPDATE 8
-
Bewertung
3 / 5
- Build-Version 269.772
- Autor Yokmosho
- Herunterladen (1.047x) Herunterladen
- Dateigröße 2,13 MB
- Erstellt am 03.12.2023 16:12:18
- Zuletzt aktualisiert am 12.12.2023 01:21:33
-
Basiswand (4 m)
5.084
-
Basiswand (4 m)
3.055
-
Fundament (1 m)
2.937
-
Rahmenfundament
1.579
-
Förderband Mk.5
1.472
-
Metallträger
1.267
-
Geneigte Wand (4 m)
1.166
-
Beschriftungsschild (4 m)
1.070
-
Basiswand (4 m)
823
-
Träger Verbindungselement
813
-
Porträt-Schild
792
-
Kleine Werbetafel
696
-
Geneigte Wand (8 m)
670
-
Stromleitung
665
-
Fundament (1 m)
645
-
Rahmenboden
579
-
Förderlift Mk.5
529
-
Quadratisches Schild (1 m)
474
-
Quadratisches Schild (0.5 m)
463
-
Große Werbetafel
461
-
Rahmenwand
459
-
Fundament (1 m)
457
-
Gefärbter Träger
448
-
Geneigte Eckwand (8 m)
446
-
Geneigte Wand (8 m)
441
-
Geneigte Wand (4 m)
403
-
Hexa-Fensterwand
393
-
Förderlift-Bodendurchführung
332
-
Förderband-Fusionator
322
-
Display-Schild
315
-
Doppelrampe (2 m)
300
-
Fundament (1 m)
293
-
Halbfundament (1 m)
281
-
Wandstromverteiler Mk.1
278
-
Förderband Mk.1
276
-
Rohr Mk.1
267
-
Förderbandstütze
242
-
Kleine Metallsäule
229
-
Basiswand (1 m)
221
-
Dach (1 m)
216
-
Basiswand (1 m)
210
-
Förderlift Mk.1
207
-
Basiswand (1 m)
203
-
Geneigte nach innen gewölbte Wand (4 m)
196
-
Rampenwand (8 m)
188
-
Intelligenter Splitter
179
-
Pipeline Mk.1 (Glatt)
161
-
Große Metallsäule
153
-
Doppelrampe (2 m)
152
-
Invertierte Rampenwand (8 m)
148
-
Geneigte Eckwand (4 m)
134
-
Industrieller Lagercontainer
129
-
Fundament (1 m)
118
-
Flachdach
114
-
Förderband-Deckenhalterung
111
-
Modernes Geländer
105
-
Hypertube-Wandhalterung
98
-
Große Betonsäule
96
-
Hypertube
93
-
Rampenwand (4 m)
88
-
Dach (4 m)
86
-
Geneigte Eckwand (4 m)
86
-
Pipeline-Stütze
85
-
Kleine Betonsäule
84
-
Geneigte Wand (4 m)
82
-
Deckenlicht
79
-
Förderband-Wandhalterung
71
-
Flüssigkeitsspeicher
70
-
Hypertube-Eingang
69
-
Invertierte Rampenwand (4 m)
68
-
Förderbandsplitter
67
-
Pipeline-Wandhalterung
64
-
Automatisches Tor
60
-
Förderband Mk.3
58
-
Pipeline-Bodendurchführung
58
-
Pipeline-Kreuzung
58
-
Halbfundament (1 m)
45
-
Dach (2 m)
44
-
Geneigte Wand (8 m)
44
-
Rampe (4 m)
43
-
Wandflutlicht
43
-
Invertierte Rampenwand (1 m)
42
-
Drohnenlandeplatz
42
-
Flachdach
41
-
Laufstegrampe
40
-
Förderlift Mk.2
40
-
Quadratisches Schild (2 m)
37
-
Halbfundament (1 m)
33
-
Pipeline-Wanddurchführung
33
-
Halbfundament (1 m)
30
-
Förderband Mk.2
29
-
Flachdach
28
-
Verstärktes Fenster
28
-
Programmierbarer Splitter
28
-
Modulare Förderbandstütze
25
-
Hypertube-Stütze
25
-
Dach (2 m)
24
-
Doppel-Träger-Verbindungselement
23
-
Eck-Rampe aufwärts (1 m)
22
-
Dach (1 m)
22
-
Lagercontainer
22
-
Wand mit Förderbanddurchführung x 2
20
-
Vollglas Fensterwand
20
-
Hypertube-Bodendurchführung
20
-
Gerader Laufsteg
19
-
Doppelrampe (4 m)
18
-
Rampenwand (1 m)
18
-
Laufstegecke
18
-
Förderlift Mk.3
18
-
Raffinerie
17
-
Förderband Mk.4
17
-
Dach (1 m)
16
-
Dach (2 m)
16
-
Umfüllanlage
16
-
Konstruktor
15
-
Doppelrampe (8 m)
14
-
Invertierte Rampenwand (2 m)
14
-
Invertierte Rampenwand (1 m)
14
-
Modulare Pipelinestütze
14
-
Hypertube-Wanddurchführung
14
-
Zweiseitiger Wandstromverteiler Mk.1
14
-
Beschriftungsschild (2 m)
13
-
Fabrikator
13
-
Innenecken Erweiterung (1 m)
12
-
Rampenwand (1 m)
12
-
Wand mit Förderbanddurchführung x3
11
-
Gläsernes Rahmenfundament
10
-
Halbfundament (1 m)
10
-
Beleuchtungssteuerung
10
-
Rampenwand (8 m)
10
-
Rampe (1 m)
9
-
Fundament (2 m)
9
-
Wand mit Torbogen
9
-
Rampenwand (4 m)
9
-
Strommast Mk.1
9
-
Rampe (Invertiert, 1 m)
8
-
Pipeline-Pumpe Mk.2
7
-
Hochspannungsmast
7
-
Dach (4 m)
6
-
Wand mit Förderbanddurchführung x 1
6
-
Wand mit Förderbanddurchführung x 2
6
-
Wand mit mittiger Tür
5
-
Wand mit Förderbanddurchführung x 1
5
-
Rampenwand (4 m)
5
-
Eck-Rampe abwärts (2 m)
4
-
Äußeres Eckdach (2 m)
4
-
Rampenwand (2 m)
4
-
Laufstegtreppen
4
-
AWESOME-Schredder
4
-
Frachtplattform
4
-
Rampe (Invertiert, 2 m)
3
-
Rampenwand (2 m)
3
-
Invertierte Rampenwand (4 m)
3
-
Mixer
3
-
Manufaktor
3
-
Strommast Mk.3
3
-
Strommast Mk.2
3
-
Fundament (4 m)
2
-
Rampe (4 m)
2
-
Eck-Rampe abwärts (4 m)
2
-
Eck-Rampe aufwärts (4 m)
2
-
Rampe (2 m)
2
-
Dach (4 m)
2
-
Äußeres Eckdach (4 m)
2
-
Trägerstütze
2
-
Invertierte Rampenwand (4 m)
2
-
Geneigte nach innen gewölbte Wand (4 m)
2
-
Wand mit Torbogen
2
-
Wand mit seitlicher Tür
2
-
Industrielles Geländer
2
-
Beschriftungsschild (3 m)
2
-
Quellenextraktor
2
-
Wasserextraktor
2
-
Schmelzofen
2
-
Förderlift Mk.4
2
-
Ecke aufwärts (Invertiert, 1 m)
1
-
Äußeres Eckdach (4 m)
1
-
Wand mit seitlicher Tür
1
-
Wand mit Torbogen
1
-
Geneigte Eckwand (4 m)
1
-
Wand mit Förderbanddurchführung x3
1
-
Invertierte Rampenwand (1 m)
1
-
Wand mit seitlicher Tür
1
-
Wand mit mittiger Tür
1
-
Leiter
1
-
Werkbank
1
-
Ausrüstungs-Werkstatt
1
-
Bauplan-Designer Mk.1
1
-
Quellenkompressor
1
-
Sprungfläche
1
-
Gel-Landepad
1
-
Pipeline-Pumpe Mk.1
1
-
Bahnhof
1
-
Blocksignal
1
-
Netzschalter
1
-
Beton
68.033
-
Stahlträger
24.016
-
Quarzkristall
17.010
-
Eisenplatte
15.621
-
Kupferblech
14.069
-
Stahlbetonträger
8.223
-
Turbodraht
5.207
-
Verstärkte Eisenplatte
5.114
-
Alclad-Aluminiumplatte
4.680
-
Stahlrohr
3.884
-
Eisenstange
3.318
-
Draht
3.271
-
Quarzoszillator
3.001
-
Aluminiumgehäuse
2.270
-
Kunststoff
1.564
-
Kabel
1.474
-
Sand
1.190
-
Schwerer modularer Rahmen
930
-
Highspeed-Anschluss
849
-
Rotor
712
-
Funksteuerungseinheit
430
-
Modularer Rahmen
425
-
KI-Begrenzer
350
-
Motor
344
-
Gummi
269
-
Biomasse
200
-
Computer
87
-
Yokmosho - 02.04.2024 02:09:15
Darth Bludgeon, I tested the megaprint out to look for any glitching on the smart splitters moving parts to their respective storage bins, all were behaving normally. When parts are filtered, they go through a priority load order. First priority (where applicable) is to load the production machines for ammo production, second would be to fill up the drones and drone ports, then they will start filling up the storage bins.
-
Darth Bludgeon - 25.03.2024 12:19:07
Really pretty build, lots of neat stuff... if it worked. Doesn't, for me; got supplies halfway hooked up and realized everything I was loading from the train station was going straight to the sinks. The peripheral chains seemed to work (bio-fuel, slug processing, color cartridges); coal distribution worked (brought that in by drone), batteries filled all the drone ports (but none appeared in the containers) - in fact, nothing appeared in the container area regardless of what or where it was loaded. Nice design, though.
-
-XAZU- the earthdweller - 10.12.2023 02:24:43
aaahhh!! i just found the blueprint designer area! so sick!! this is definitely a "i beat the game and don't wanna build the perfect base myself" kinda print. i like it! your architectural sense is leaps and bounds ahead of mine! lol good job!
-
-XAZU- the earthdweller - 10.12.2023 02:21:38
wow! what a project! i liked the shooting range!
im still touring it and im sure ive missed a couple of spots but this place is HUGE! theres so much space! very straight forward storage solution tho! and the drone hive idea is power hungry but effective i bet!
ive been peeking around the logistics and it looks stout! 4 lines of incoming items at mk5 speeds!
-
Yokmosho - 09.12.2023 03:41:40
Spacepup, I'm humbled by your use of Project P.I.O.N.E.E.R in a YouTube video. I can't say that I've ever expected any of my creations to spawn a video project.
-
spacepup - 07.12.2023 00:52:59
i made a short video on this if you wanna check it out! ( https://www.youtube.com/watch?v=L8ygO8Cy938 )