Project P.I.O.N.E.E.R.




Welcome to the Planetary Initiative Organization Nexus/ Engineered Economical Rocket, or Project P.I.O.N.E.E.R. I took a bit of inspiration from the Star Carrier book series by Ian Douglas to make a spaceship themed central hub; utilizing the mushroom cap design used for near light speed travel radiation shielding for the bulk of the factory.
The whole base is more than just a storage hub. There is a hypertube system and bridge that can quickly move a pioneer from the grassy canyon to the upper plateau. There are also 4 P.P.C's (Pioneer Projectile Cannons) utilizing B.E.L.T. loading (Biological Equipment Loading Transjector) capable of sending pioneer nearly anywhere on the map with jet pack/parachute creativity. There is also a prototyping holodeck off of the armory
There is also a full manufacturing setup for processing biomass, slugs, packaged fuel, and ammo/nobelisk production. Production utilizes parts from storage, along with piping in the needed oil and water. You will need to create drone ports to fly in 4 resources:
Coal 120 PPM Sulfur 120 PPM Bauxite: 120 PPM Uranium: 20 PPM
But the best part is the Rapid Part Delivery System. I have a drone port mapped to every part type along with 2 additional drones for use as ammo and supply drops. These drone ports are also connected to the sorting bus; so you can have the drones bring back unneeded parts, wood, leaves, ect. for storage and processing. It takes around 2 minutes at most for any parts to deliver by drone once you have it mapped to a field drone port.
---I've received a few complaints about the storage not showing any parts, which is true only when you first start loading parts. When parts are filtered, they go through a priority load order. First priority (where applicable) is to load the production machines for ammo production, second would be to fill up the drones and drone ports, then they will start filling up the storage bins. Please keep this in mind that it will take time for parts to show in the storage bins, but they will likely show up for drone delivery almost right away.
***For obvious reasons, do not feed WIP items into the sorting bus, the entire thing will end up jamming. I do have filters set up just before the sinks on the sorting line to pull unsinkable items into a storage container, as long as the items can be selected in programmable splitters
Please drop me a line at Yokmosho on Discord with any comments or bugs/issues found
Updates/fixes: 12-3: connection issue before final sinks fixed 12-8: sped up uranium belt to nuke nobelisk production so uranium doesn't back up in the drone port storage and lead to massive amounts of radiation in the base. Also rebuilt the hypertubbe entrance and landing zone at the bottom of the rocket to prevent the "relativistic death cannon" when using the hypertube from the top. 12-11: reversed fill order on packagers to prevent water overflow from taking all containers and stalling. Also replaced a missing merger near the end of the main feed bus that led to an eventual overflow
- Contagem de itens 39.618
- Coordenadas -25 / 85.038
- Colar apenas no local original Yes
- Categorias Architecture Complete factory Interior decorations Exterior decorations Pipes system UPDATE 8
-
Classificação
3 / 5
- Versão da compilação 269.772
- Autor Yokmosho
- Transferir (869x) Transferir
- Tamanho do ficheiro 2,13 MB
- Criado em 03/12/2023 16:12:18
- Última atualização em 12/12/2023 01:21:33
-
Basic Wall (4 m) 5.084
-
Basic Wall (4 m) 3.055
-
Foundation (1 m) 2.937
-
Fundação de Estrutura 1.579
-
Esteira Transportadora Mk.5 1.472
-
Viga de Metal 1.267
-
Tilted Wall (4 m) 1.166
-
Label Sign (4 m) 1.070
-
Basic Wall (4 m) 823
-
Conetor de Viga 813
-
Placa Retrato 792
-
Placar Pequeno 696
-
Tilted Wall (8 m) 670
-
Cabo Elétrico 665
-
Foundation (1 m) 645
-
Chão de Estrutura 579
-
Esteira Transportadora Vertical Mk.5 529
-
Square Sign (1 m) 474
-
Square Sign (0.5 m) 463
-
Placar Grande 461
-
Parede de Estrutura 459
-
Foundation (1 m) 457
-
Viga Pintada 448
-
Tilted Corner Wall (8 m) 446
-
Tilted Wall (8 m) 441
-
Tilted Wall (4 m) 403
-
Janela com Caixilho Hexagonal 393
-
Buraco para Esteiras Transportadoras Verticais 332
-
Unificador de Esteiras Transportadoras 322
-
Placa de Sinalização 315
-
Rampa dupla (2 m) 300
-
Foundation (1 m) 293
-
Metade de uma fundação (1 m) 281
-
Tomada de Parede Mk.1 278
-
Esteira Transportadora Mk.1 276
-
Tubo Mk.1 267
-
Suporte para Esteira Transportadora 242
-
Pilar de Metal Pequeno 229
-
Basic Wall (1 m) 221
-
Telhado (1 m) 216
-
Basic Wall (1 m) 210
-
Esteira Transportadora Vertical Mk.1 207
-
Basic Wall (1 m) 203
-
Tilted Concave Wall (4 m) 196
-
Ramp Wall (8 m) 188
-
Divisor inteligente 179
-
Tubo Limpo Mk.1 161
-
Pilar de Metal Grande 153
-
Rampa dupla (2 m) 152
-
Inverted Ramp Wall (8 m) 148
-
Tilted Corner Wall (4 m) 134
-
Armazém Industrial de Itens 129
-
Foundation (1 m) 118
-
Flat Roof 114
-
Suporte de Teto da Transportadora 111
-
Corrimões Modernos 105
-
Suporte de Parede para HiperTubo 98
-
Pilar de Betão Grande 96
-
HiperTubo 93
-
Ramp Wall (4 m) 88
-
Telhado (4 m) 86
-
Tilted Corner Wall (4 m) 86
-
Suporte de Tubo 85
-
Pilar de Betão Pequeno 84
-
Tilted Wall (4 m) 82
-
Luz de Teto 79
-
Suporte de Parede de Esteiras Transportadoras 71
-
Reservatório de Fluidos 70
-
Entrada de HiperTubo 69
-
Inverted Ramp Wall (4 m) 68
-
Divisor de Esteiras Transportadoras 67
-
Suporte de Parede para Tubo 64
-
Portão Automático 60
-
Esteira Transportadora Mk.3 58
-
Buraco de Chão para Tubo 58
-
Pipeline Junction 58
-
Metade de uma fundação (1 m) 45
-
Telhado (2 m) 44
-
Tilted Wall (8 m) 44
-
Rampa (4 m) 43
-
Wall-Mounted Flood Light 43
-
Inverted Ramp Wall (1 m) 42
-
Porto de Drones 42
-
Flat Roof 41
-
Rampa de Passadiço 40
-
Esteira Transportadora Vertical Mk.2 40
-
Square Sign (2 m) 37
-
Metade de uma fundação (1 m) 33
-
Buraco de Parede para Tubo 33
-
Metade de uma fundação (1 m) 30
-
Esteira Transportadora Mk.2 29
-
Flat Roof 28
-
Janela Reforçada 28
-
Divisor Programável 28
-
Suporte Empilhável de Esteira Transportadora 25
-
Suporte para HiperTubo 25
-
Telhado (2 m) 24
-
Double Beam Connector 23
-
Rampa para cima de canto (1 m) 22
-
Telhado (1 m) 22
-
Armazém de Itens 22
-
Conveyor Wall x 2 20
-
Janela com Caixilho Completo 20
-
Buraco de Chão para HiperTubo 20
-
Straight Catwalk 19
-
Rampa dupla (4 m) 18
-
Ramp Wall (1 m) 18
-
Canto de Passadiço 18
-
Esteira Transportadora Vertical Mk.3 18
-
Refinaria 17
-
Esteira Transportadora Mk.4 17
-
Telhado (1 m) 16
-
Telhado (2 m) 16
-
Embalador 16
-
Construtor 15
-
Rampa dupla (8 m) 14
-
Inverted Ramp Wall (2 m) 14
-
Inverted Ramp Wall (1 m) 14
-
Suporte Empilhável de Tubo 14
-
Buraco de Parede para HiperTubo 14
-
Tomada de Parede Dupla Mk.1 14
-
Label Sign (2 m) 13
-
Montador 13
-
Extensão de canto interno (1 m) 12
-
Ramp Wall (1 m) 12
-
Conveyor Wall x 3 11
-
Fundação de Estrutura de Vidro 10
-
Metade de uma fundação (1 m) 10
-
Painel de controlo de luz 10
-
Ramp Wall (8 m) 10
-
Rampa (1 m) 9
-
Foundation (2 m) 9
-
Parede com Abertura para Portão 9
-
Ramp Wall (4 m) 9
-
Poste de Energia Mk.1 9
-
Rampa invertida (1 m) 8
-
Bomba de Tubo Mk.2 7
-
Torre de Energia 7
-
Telhado (4 m) 6
-
Conveyor Wall x 1 6
-
Conveyor Wall x 2 6
-
Parede com Porta ao Centro 5
-
Conveyor Wall x 1 5
-
Ramp Wall (4 m) 5
-
Rampa para baixo de canto (2 m) 4
-
Telhado de canto externo (2 m) 4
-
Ramp Wall (2 m) 4
-
Escadas de Passadiço 4
-
Coletor AWESOME 4
-
Plataforma de Carga 4
-
Rampa invertida (2 m) 3
-
Ramp Wall (2 m) 3
-
Inverted Ramp Wall (4 m) 3
-
Misturador 3
-
Fabricante 3
-
Poste de Energia Mk.3 3
-
Poste de Energia Mk.2 3
-
Foundation (4 m) 2
-
Rampa (4 m) 2
-
Rampa para baixo de canto (4 m) 2
-
Rampa para cima de canto (4 m) 2
-
Rampa (2 m) 2
-
Telhado (4 m) 2
-
Telhado de canto externo (4 m) 2
-
Suporte de Viga 2
-
Inverted Ramp Wall (4 m) 2
-
Tilted Concave Wall (4 m) 2
-
Parede com Abertura para Portão 2
-
Parede com Porta Lateral 2
-
Corrimões Industriais 2
-
Label Sign (3 m) 2
-
Extrator de Recursos de Poços 2
-
Bomba de Água 2
-
Fundidor 2
-
Esteira Transportadora Vertical Mk.4 2
-
Canto invertido para cima (1 m) 1
-
Telhado de canto externo (4 m) 1
-
Parede com Porta Lateral 1
-
Parede com Abertura para Portão 1
-
Tilted Corner Wall (4 m) 1
-
Conveyor Wall x 3 1
-
Inverted Ramp Wall (1 m) 1
-
Parede com Porta Lateral 1
-
Parede com Porta ao Centro 1
-
Escada de mão 1
-
Bancada de Fabrico 1
-
Oficina de Equipamento 1
-
Blueprint Designer Mk.1 1
-
Pressurizador de Poço de Recursos 1
-
Plataforma de Salto 1
-
Plataforma de Aterragem de Gelatina 1
-
Bomba de Tubo Mk. 1 1
-
Estação de Comboios 1
-
Sinal de Bloqueio 1
-
Interruptor de Energia 1
-
Betão 68.033
-
Viga de Aço 24.016
-
Cristal de Quartzo 17.010
-
Chapa de Ferro 15.621
-
Chapa de cobre 14.069
-
Viga Industrial Revestida 8.223
-
Fio Rápido 5.207
-
Placa de Ferro Reforçada 5.114
-
Chapa de Alumínio Alclad 4.680
-
Tubo de Aço 3.884
-
Vara de Ferro 3.318
-
Arame 3.271
-
Oscilador Cristalino 3.001
-
Caixa de Alumínio 2.270
-
Plástico 1.564
-
Cabo 1.474
-
Sílica 1.190
-
Estrutura Modular Forte 930
-
Conector de Alta Velocidade 849
-
Rotor 712
-
Unidade de Controlo por Rádio 430
-
Estrutura Modular 425
-
Limitador de IA 350
-
Motor 344
-
Borracha 269
-
Biomassa 200
-
Computador 87
-
Yokmosho - 02/04/2024 02:09:15
Darth Bludgeon, I tested the megaprint out to look for any glitching on the smart splitters moving parts to their respective storage bins, all were behaving normally. When parts are filtered, they go through a priority load order. First priority (where applicable) is to load the production machines for ammo production, second would be to fill up the drones and drone ports, then they will start filling up the storage bins.
-
Darth Bludgeon - 25/03/2024 12:19:07
Really pretty build, lots of neat stuff... if it worked. Doesn't, for me; got supplies halfway hooked up and realized everything I was loading from the train station was going straight to the sinks. The peripheral chains seemed to work (bio-fuel, slug processing, color cartridges); coal distribution worked (brought that in by drone), batteries filled all the drone ports (but none appeared in the containers) - in fact, nothing appeared in the container area regardless of what or where it was loaded. Nice design, though.
-
-XAZU- the earthdweller - 10/12/2023 02:24:43
aaahhh!! i just found the blueprint designer area! so sick!! this is definitely a "i beat the game and don't wanna build the perfect base myself" kinda print. i like it! your architectural sense is leaps and bounds ahead of mine! lol good job!
-
-XAZU- the earthdweller - 10/12/2023 02:21:38
wow! what a project! i liked the shooting range!
im still touring it and im sure ive missed a couple of spots but this place is HUGE! theres so much space! very straight forward storage solution tho! and the drone hive idea is power hungry but effective i bet!
ive been peeking around the logistics and it looks stout! 4 lines of incoming items at mk5 speeds!
-
Yokmosho - 09/12/2023 03:41:40
Spacepup, I'm humbled by your use of Project P.I.O.N.E.E.R in a YouTube video. I can't say that I've ever expected any of my creations to spawn a video project.
-
spacepup - 07/12/2023 00:52:59
i made a short video on this if you wanna check it out! ( https://www.youtube.com/watch?v=L8ygO8Cy938 )