Project P.I.O.N.E.E.R.




Welcome to the Planetary Initiative Organization Nexus/ Engineered Economical Rocket, or Project P.I.O.N.E.E.R. I took a bit of inspiration from the Star Carrier book series by Ian Douglas to make a spaceship themed central hub; utilizing the mushroom cap design used for near light speed travel radiation shielding for the bulk of the factory.
The whole base is more than just a storage hub. There is a hypertube system and bridge that can quickly move a pioneer from the grassy canyon to the upper plateau. There are also 4 P.P.C's (Pioneer Projectile Cannons) utilizing B.E.L.T. loading (Biological Equipment Loading Transjector) capable of sending pioneer nearly anywhere on the map with jet pack/parachute creativity. There is also a prototyping holodeck off of the armory
There is also a full manufacturing setup for processing biomass, slugs, packaged fuel, and ammo/nobelisk production. Production utilizes parts from storage, along with piping in the needed oil and water. You will need to create drone ports to fly in 4 resources:
Coal 120 PPM Sulfur 120 PPM Bauxite: 120 PPM Uranium: 20 PPM
But the best part is the Rapid Part Delivery System. I have a drone port mapped to every part type along with 2 additional drones for use as ammo and supply drops. These drone ports are also connected to the sorting bus; so you can have the drones bring back unneeded parts, wood, leaves, ect. for storage and processing. It takes around 2 minutes at most for any parts to deliver by drone once you have it mapped to a field drone port.
---I've received a few complaints about the storage not showing any parts, which is true only when you first start loading parts. When parts are filtered, they go through a priority load order. First priority (where applicable) is to load the production machines for ammo production, second would be to fill up the drones and drone ports, then they will start filling up the storage bins. Please keep this in mind that it will take time for parts to show in the storage bins, but they will likely show up for drone delivery almost right away.
***For obvious reasons, do not feed WIP items into the sorting bus, the entire thing will end up jamming. I do have filters set up just before the sinks on the sorting line to pull unsinkable items into a storage container, as long as the items can be selected in programmable splitters
Please drop me a line at Yokmosho on Discord with any comments or bugs/issues found
Updates/fixes: 12-3: connection issue before final sinks fixed 12-8: sped up uranium belt to nuke nobelisk production so uranium doesn't back up in the drone port storage and lead to massive amounts of radiation in the base. Also rebuilt the hypertubbe entrance and landing zone at the bottom of the rocket to prevent the "relativistic death cannon" when using the hypertube from the top. 12-11: reversed fill order on packagers to prevent water overflow from taking all containers and stalling. Also replaced a missing merger near the end of the main feed bus that led to an eventual overflow
- Contagem de itens 39.618
- Coordenadas -25 / 85.038
- Apenas colocar na posição original Yes
- Categorias Architecture Complete factory Interior decorations Exterior decorations Pipes system UPDATE 8
-
Avaliação
3 / 5
- Versão do jogo 269.772
- Autor Yokmosho
- Baixar (798x) Baixar
- Tamanho do ficheiro 2,13 MB
- Criado em 03/12/2023 16:12:18
- Última atualização em 12/12/2023 01:21:33
-
Parede Básica (4 m) 5.084
-
Parede Básica (4 m) 3.055
-
Fundação (1 m) 2.937
-
Fundação de esquadria 1.579
-
Esteira de transporte v.5 1.472
-
Viga de metal 1.267
-
Parede Inclinada (4 m) 1.166
-
Sinal de etiqueta (4 m) 1.070
-
Parede Básica (4 m) 823
-
Conector de Vigas 813
-
Placa de Retrato 792
-
Painel pequeno 696
-
Parede Inclinada (8 m) 670
-
Cabo elétrico 665
-
Fundação (1 m) 645
-
Chão de esquadria 579
-
Esteira vertical v.5 529
-
Placa Quadrada (1 m) 474
-
Placa Quadrada (0.5 m) 463
-
Painel grande 461
-
Parede de esquadria 459
-
Fundação (1 m) 457
-
Viga pintada 448
-
Parede de Canto Inclinada (8 m) 446
-
Parede Inclinada (8 m) 441
-
Parede Inclinada (4 m) 403
-
Janela de esquadria hexagonal 393
-
Buraco de chão para esteira vertical 332
-
Unificador de esteira 322
-
Placa de Indicação 315
-
Rampa Dupla (2 m) 300
-
Fundação (1 m) 293
-
Fundação (1 m) 281
-
Conector de energia de Parede v.1 278
-
Esteira de Transporte v.1 276
-
Tubulação v.1 267
-
Suporte de esteira 242
-
Pilar de metal pequeno 229
-
Parede Básica (1 m) 221
-
Telhado (1 m) 216
-
Parede Básica (1 m) 210
-
Elevador de transporte v.1 207
-
Parede Básica (1 m) 203
-
Parede Concava Inclinada (4 m) 196
-
Parede de Rampa (8 m) 188
-
Divisor inteligente 179
-
Tubulação simples v.1 161
-
Pilar de metal grande 153
-
Rampa Dupla (2 m) 152
-
Parede de Rampa Invertida (8 m) 148
-
Parede de Canto Inclinada (4 m) 134
-
Contêiner de armazenamento industrial 129
-
Fundação (1 m) 118
-
Telhado plano 114
-
Suporte de Teto para Esteira 111
-
Corrimão moderno 105
-
Suporte de parede para Hipertubo 98
-
Pilar de concreto grande 96
-
Hipertubo 93
-
Parede de Rampa (4 m) 88
-
Telhado (4 m) 86
-
Parede de Canto Inclinada (4 m) 86
-
Suporte para Tubulação 85
-
Pilar de concreto pequeno 84
-
Parede Inclinada (4 m) 82
-
Luz de teto 79
-
Suporte de Parede para Esteira 71
-
Tanque de fluido 70
-
Entrada de Hipertubo 69
-
Parede de Rampa Invertida (4 m) 68
-
Divisor de esteira 67
-
Suporte de parede para tubulação 64
-
Portão automático 60
-
Esteira de transporte v.3 58
-
Abertura de Chão para Tubulação 58
-
Tubulação cruzada 58
-
Fundação (1 m) 45
-
Telhado (2 m) 44
-
Parede Inclinada (8 m) 44
-
Rampa (4 m) 43
-
Holofote de Parede 43
-
Parede de Rampa Invertida (1 m) 42
-
Hangar de drone 42
-
Telhado plano 41
-
Rampa de Passarela 40
-
Elevador de transporte v.2 40
-
Placa Quadrada (2 m) 37
-
Fundação (1 m) 33
-
Suporte de parede para tubulação 33
-
Fundação (1 m) 30
-
Esteira de transporte v.2 29
-
Telhado plano 28
-
Janela reforçada 28
-
Divisor programável 28
-
Suporte empilhável de Esteira 25
-
Suporte de hipertubo 25
-
Telhado (2 m) 24
-
Conector duplo de Viga 23
-
Rampa Superior (1 m) 22
-
Telhado (1 m) 22
-
Contêiner de armazenamento 22
-
Suporte de Parede para Esteira x 2 20
-
Janela de esquadria completa 20
-
Abertura de Chão para Hipertubo 20
-
Passarela reta 19
-
Rampa Dupla (4 m) 18
-
Parede de Rampa (1 m) 18
-
Canto de Passarela 18
-
Elevador de transporte v.3 18
-
Refinaria 17
-
Esteira de transporte v.4 17
-
Telhado (1 m) 16
-
Telhado (2 m) 16
-
Embaladora 16
-
Construtor 15
-
Rampa Dupla (8 m) 14
-
Parede de Rampa Invertida (2 m) 14
-
Parede de Rampa Invertida (1 m) 14
-
Suporte empilhável de Tubulação 14
-
Abertura de Parede para Hipertubo 14
-
Conector de energia de Parede Duplo v.1 14
-
Sinal de etiqueta (2 m) 13
-
Montadora 13
-
Extensão interna de canto (1 m) 12
-
Parede de Rampa (1 m) 12
-
Suporte de Parede para Esteira x 3 11
-
Fundação de esquadria com vidro 10
-
Fundação (1 m) 10
-
Painel de controle de iluminação 10
-
Parede de Rampa (8 m) 10
-
Rampa (1 m) 9
-
Fundação (2 m) 9
-
Parede com abertura para portão 9
-
Parede de Rampa (4 m) 9
-
Poste de Energia v.1 9
-
Rampa invertida (1 m) 8
-
Bomba de Tubulação v.2 7
-
Torre de energia 7
-
Telhado (4 m) 6
-
Suporte de Parede para Esteira x 1 6
-
Suporte de Parede para Esteira x 2 6
-
Parede com porta central 5
-
Suporte de Parede para Esteira x 1 5
-
Parede de Rampa (4 m) 5
-
Rampa Inferior (2 m) 4
-
Canto do telhado externo (2 m) 4
-
Parede de Rampa (2 m) 4
-
Escadas de Passarela 4
-
Triturador SUPIMPA 4
-
Plataforma de carga 4
-
Rampa invertida (2 m) 3
-
Parede de Rampa (2 m) 3
-
Parede de Rampa Invertida (4 m) 3
-
Misturador 3
-
Fabricante 3
-
Poste de energia v.3 3
-
Poste de energia v.2 3
-
Fundação (4 m) 2
-
Rampa (4 m) 2
-
Rampa Inferior (4 m) 2
-
Rampa Superior (4 m) 2
-
Rampa (2 m) 2
-
Telhado (4 m) 2
-
Canto do telhado externo (4 m) 2
-
Suporte de viga 2
-
Parede de Rampa Invertida (4 m) 2
-
Parede Concava Inclinada (4 m) 2
-
Parede com abertura para portão 2
-
Parede com porta lateral 2
-
Corrimão industrial 2
-
Sinal de etiqueta (3 m) 2
-
Extrator de poço de recurso 2
-
Bomba d\'água 2
-
Fornalha 2
-
Esteira vertical v.4 2
-
Invertido Canto Acima (1 m) 1
-
Canto do telhado externo (4 m) 1
-
Parede com porta lateral 1
-
Parede com abertura para portão 1
-
Parede de Canto Inclinada (4 m) 1
-
Suporte de Parede para Esteira x 3 1
-
Parede de Rampa Invertida (1 m) 1
-
Parede com porta lateral 1
-
Parede com porta central 1
-
Escada 1
-
Bancada de fabricação 1
-
Oficina de equipamentos 1
-
Criador de Projetos v.1 1
-
Pressurizador de poço de recurso 1
-
Plataforma de salto 1
-
Base de gelatina para aterrissagem 1
-
Bomba de Tubulação v.1 1
-
Estação de trem 1
-
Sinal de trecho 1
-
Interruptor 1
-
Concreto 68.033
-
Viga de Aço 24.016
-
Cristal de quartzo 17.010
-
Chapa de Ferro 15.621
-
Chapa de Cobre 14.069
-
Viga industrial revestida 8.223
-
Fio-veloz 5.207
-
Chapa de Ferro reforçada 5.114
-
Chapa de Duralumínio 4.680
-
Tubulação de Aço 3.884
-
Barra de ferro 3.318
-
Fio 3.271
-
Oscilador de Cristal 3.001
-
Caixote de alumínio 2.270
-
Plástico 1.564
-
Cabo 1.474
-
Sílica 1.190
-
Armação modular pesada 930
-
Conector de alta velocidade 849
-
Rotor 712
-
Unidade de controle de rádio 430
-
Armação modular 425
-
Limitador da I.A. 350
-
Motor 344
-
Borracha 269
-
Biomassa 200
-
Computador 87
-
Yokmosho - 02/04/2024 02:09:15
Darth Bludgeon, I tested the megaprint out to look for any glitching on the smart splitters moving parts to their respective storage bins, all were behaving normally. When parts are filtered, they go through a priority load order. First priority (where applicable) is to load the production machines for ammo production, second would be to fill up the drones and drone ports, then they will start filling up the storage bins.
-
Darth Bludgeon - 25/03/2024 12:19:07
Really pretty build, lots of neat stuff... if it worked. Doesn't, for me; got supplies halfway hooked up and realized everything I was loading from the train station was going straight to the sinks. The peripheral chains seemed to work (bio-fuel, slug processing, color cartridges); coal distribution worked (brought that in by drone), batteries filled all the drone ports (but none appeared in the containers) - in fact, nothing appeared in the container area regardless of what or where it was loaded. Nice design, though.
-
-XAZU- the earthdweller - 10/12/2023 02:24:43
aaahhh!! i just found the blueprint designer area! so sick!! this is definitely a "i beat the game and don't wanna build the perfect base myself" kinda print. i like it! your architectural sense is leaps and bounds ahead of mine! lol good job!
-
-XAZU- the earthdweller - 10/12/2023 02:21:38
wow! what a project! i liked the shooting range!
im still touring it and im sure ive missed a couple of spots but this place is HUGE! theres so much space! very straight forward storage solution tho! and the drone hive idea is power hungry but effective i bet!
ive been peeking around the logistics and it looks stout! 4 lines of incoming items at mk5 speeds!
-
Yokmosho - 09/12/2023 03:41:40
Spacepup, I'm humbled by your use of Project P.I.O.N.E.E.R in a YouTube video. I can't say that I've ever expected any of my creations to spawn a video project.
-
spacepup - 07/12/2023 00:52:59
i made a short video on this if you wanna check it out! ( https://www.youtube.com/watch?v=L8ygO8Cy938 )