Project P.I.O.N.E.E.R.
Welcome to the Planetary Initiative Organization Nexus/ Engineered Economical Rocket, or Project P.I.O.N.E.E.R. I took a bit of inspiration from the Star Carrier book series by Ian Douglas to make a spaceship themed central hub; utilizing the mushroom cap design used for near light speed travel radiation shielding for the bulk of the factory.
The whole base is more than just a storage hub. There is a hypertube system and bridge that can quickly move a pioneer from the grassy canyon to the upper plateau. There are also 4 P.P.C's (Pioneer Projectile Cannons) utilizing B.E.L.T. loading (Biological Equipment Loading Transjector) capable of sending pioneer nearly anywhere on the map with jet pack/parachute creativity. There is also a prototyping holodeck off of the armory
There is also a full manufacturing setup for processing biomass, slugs, packaged fuel, and ammo/nobelisk production. Production utilizes parts from storage, along with piping in the needed oil and water. You will need to create drone ports to fly in 4 resources:
Coal 120 PPM Sulfur 120 PPM Bauxite: 120 PPM Uranium: 20 PPM
But the best part is the Rapid Part Delivery System. I have a drone port mapped to every part type along with 2 additional drones for use as ammo and supply drops. These drone ports are also connected to the sorting bus; so you can have the drones bring back unneeded parts, wood, leaves, ect. for storage and processing. It takes around 2 minutes at most for any parts to deliver by drone once you have it mapped to a field drone port.
---I've received a few complaints about the storage not showing any parts, which is true only when you first start loading parts. When parts are filtered, they go through a priority load order. First priority (where applicable) is to load the production machines for ammo production, second would be to fill up the drones and drone ports, then they will start filling up the storage bins. Please keep this in mind that it will take time for parts to show in the storage bins, but they will likely show up for drone delivery almost right away.
***For obvious reasons, do not feed WIP items into the sorting bus, the entire thing will end up jamming. I do have filters set up just before the sinks on the sorting line to pull unsinkable items into a storage container, as long as the items can be selected in programmable splitters
Please drop me a line at Yokmosho on Discord with any comments or bugs/issues found
Updates/fixes: 12-3: connection issue before final sinks fixed 12-8: sped up uranium belt to nuke nobelisk production so uranium doesn't back up in the drone port storage and lead to massive amounts of radiation in the base. Also rebuilt the hypertubbe entrance and landing zone at the bottom of the rocket to prevent the "relativistic death cannon" when using the hypertube from the top. 12-11: reversed fill order on packagers to prevent water overflow from taking all containers and stalling. Also replaced a missing merger near the end of the main feed bus that led to an eventual overflow
- Liczba przedmiotów 39 618
- Koordynaty -25 / 85 038
- Wklej tylko w oryginalnej lokalizacji Yes
- Kategorie Architecture Complete factory Interior decorations Exterior decorations Pipes system UPDATE 8
-
Klasyfikacja
3 / 5
- Wersja kompilacji 269 772
- Autor Yokmosho
- Pobierz (1 048x) Pobierz
- Rozmiar pliku 2,13 MB
- Data utworzenia 3 gru 2023, 16:12:18
- Ostatnia aktualizacja 12 gru 2023, 01:21:33
-
Prosta ściana 4m
5 084
-
Prosta ściana 4m
3 055
-
Fundament 1m
2 937
-
Rama fundamentu
1 579
-
Taśmociąg kl. 5
1 472
-
Metalowa belka
1 267
-
Pochylona ściana 4m
1 166
-
Wąski wyświetlacz 4m
1 070
-
Prosta ściana 4m
823
-
Łącznik belek
813
-
Pionowy wyświetlacz
792
-
Mały billboard
696
-
Pochylona ściana 8m
670
-
Linia zasilania
665
-
Fundament 1m
645
-
Rama podłogi
579
-
Podnośnik taśmowy kl. 5
529
-
Kwadratowy wyświetlacz 1m
474
-
Kwadratowy wyświetlacz 0.5m
463
-
Duży billboard
461
-
Rama ściany
459
-
Fundament 1m
457
-
Pomalowana belka
448
-
Pochylona narożna ściana 8m
446
-
Pochylona ściana 8m
441
-
Pochylona ściana 4m
403
-
Okno z ramą w sześciokąty
393
-
Przepust podłogowy podnośnika taśmowego
332
-
Łącznik taśmociągów
322
-
Wyświetlacz
315
-
Podwójna rampa 2m
300
-
Fundament 1m
293
-
Połowa fundamentu 1m
281
-
Gniazdo ścienne kl. 1
278
-
Taśmociąg kl. 1
276
-
Rurociąg kl. 1
267
-
Wspornik taśmociągu
242
-
Mały metalowy filar
229
-
Prosta ściana 1m
221
-
Dach 1m
216
-
Prosta ściana 1m
210
-
Podnośnik taśmowy kl. 1
207
-
Prosta ściana 1m
203
-
Pochylona wklęsła ściana 4m
196
-
Rampa ściana 8m
188
-
Inteligentny rozdzielacz
179
-
Rurociąg kl. 1 (Brak wskaźnika)
161
-
Duży metalowy filar
153
-
Podwójna rampa 2m
152
-
Odwrócona rampa ściana 8m
148
-
Pochylona narożna ściana 4m
134
-
Kontener przemysłowy
129
-
Fundament 1m
118
-
Płaski dach
114
-
Sufitowy uchwyt taśmociągu
111
-
Nowoczesna balustrada
105
-
Ścienna podpora hipertuby
98
-
Duży betonowy filar
96
-
Hipertuba
93
-
Rampa ściana 4m
88
-
Dach 4m
86
-
Pochylona narożna ściana 4m
86
-
Podpora rurociągu
85
-
Mały betonowy filar
84
-
Pochylona ściana 4m
82
-
Lampa sufitowa
79
-
Uchwyt ścienny na taśmociąg
71
-
Zbiornik
70
-
Wejście do hipertuby
69
-
Odwrócona rampa ściana 4m
68
-
Rozdzielacz taśmociągu
67
-
Ścienny wspornik rurociągu
64
-
Automatyczna brama
60
-
Taśmociąg kl. 3
58
-
Przepust podłogowy rurociągu
58
-
Skrzyżowanie rurociągów
58
-
Połowa fundamentu 1m
45
-
Dach 2m
44
-
Pochylona ściana 8m
44
-
Rampa 4m
43
-
Reflektor naścienny
43
-
Odwrócona rampa ściana 1m
42
-
Stacja drona
42
-
Płaski dach
41
-
Kładka z rampą
40
-
Podnośnik taśmowy kl. 2
40
-
Kwadratowy wyświetlacz 2m
37
-
Połowa fundamentu 1m
33
-
Przepust ścienny rurociągu
33
-
Połowa fundamentu 1m
30
-
Taśmociąg kl. 2
29
-
Płaski dach
28
-
Wzmocnione okno
28
-
Programowalny rozdzielacz
28
-
Nakładany wspornik taśmociągu
25
-
Podpora hipertuby
25
-
Dach 2m
24
-
Podwójny łącznik belki
23
-
Rampa narożnikowa w górę 1m
22
-
Dach 1m
22
-
Kontener
22
-
Ściana na taśmociąg x2
20
-
Okno z pełną ramą
20
-
Przepust podłogowy hipertuby
20
-
Przejście proste
19
-
Podwójna rampa 4m
18
-
Rampa ściana 1m
18
-
Kładka ze skrętem
18
-
Podnośnik taśmowy kl. 3
18
-
Rafineria
17
-
Taśmociąg kl. 4
17
-
Dach 1m
16
-
Dach 2m
16
-
Pakowacz
16
-
Konstruktor
15
-
Podwójna rampa 8m
14
-
Odwrócona rampa ściana 2m
14
-
Odwrócona rampa ściana 1m
14
-
Nakładana podstawa rurociągu
14
-
Przepust ścienny hipertuby
14
-
Podwójne gniazdo ścienne kl. 1
14
-
Wąski wyświetlacz 2m
13
-
Monter
13
-
Przedłużenie wewnętrznego narożnika 1m
12
-
Rampa ściana 1m
12
-
Ściana na taśmociąg x3
11
-
Szklana rama fundamentu
10
-
Połowa fundamentu 1m
10
-
Panel kontrolny świateł
10
-
Rampa ściana 8m
10
-
Rampa 1m
9
-
Fundament 2m
9
-
Otwór ścienny na bramę
9
-
Rampa ściana 4m
9
-
Słup energetyczny kl. 1
9
-
Odwrócona rampa 1m
8
-
Pompa rurociągu kl. 2
7
-
Wieża energetyczna
7
-
Dach 4m
6
-
Ściana na taśmociąg x1
6
-
Ściana na taśmociąg x2
6
-
Ściana z drzwiami pośrodku
5
-
Ściana na taśmociąg x1
5
-
Rampa ściana 4m
5
-
Rampa narożnikowa w dół 2m
4
-
Narożny, zewnętrzny dach 2m
4
-
Rampa ściana 2m
4
-
Kładka ze schodami
4
-
Niszczarka AWESOME
4
-
Peron towarowy
4
-
Odwrócona rampa 2m
3
-
Rampa ściana 2m
3
-
Odwrócona rampa ściana 4m
3
-
Blender
3
-
Producent
3
-
Słup energetyczny kl. 3
3
-
Słup energetyczny kl. 2
3
-
Fundament 4m
2
-
Rampa 4m
2
-
Rampa narożnikowa w dół 4m
2
-
Rampa narożnikowa w górę 4m
2
-
Rampa 2m
2
-
Dach 4m
2
-
Narożny, zewnętrzny dach 4m
2
-
Wspornik belki
2
-
Odwrócona rampa ściana 4m
2
-
Pochylona wklęsła ściana 4m
2
-
Otwór ścienny na bramę
2
-
Ściana z drzwiami z boku
2
-
Przemysłowa balustrada
2
-
Wąski wyświetlacz 3m
2
-
Ekstraktor studni zasobów
2
-
Pompa wodna
2
-
Piec hutniczy
2
-
Podnośnik taśmowy kl. 4
2
-
Odwrócony górny narożnik 1m
1
-
Narożny, zewnętrzny dach 4m
1
-
Ściana z drzwiami z boku
1
-
Otwór ścienny na bramę
1
-
Pochylona narożna ściana 4m
1
-
Ściana na taśmociąg x3
1
-
Odwrócona rampa ściana 1m
1
-
Ściana z drzwiami z boku
1
-
Ściana z drzwiami pośrodku
1
-
Drabina
1
-
Warsztat
1
-
Pracownia wyposażenia
1
-
Kreator schematów
1
-
Uszczelniacz studni zasobów
1
-
Odskocznia
1
-
Żelowe lądowisko
1
-
Pompa rurociągu kl. 1
1
-
Stacja kolejowa
1
-
Sygnał bloku
1
-
Przełącznik zasilania
1
-
Beton
63 202
-
Stalowa belka
17 979
-
Kryształ kwarcu
17 010
-
Miedziana blacha
14 070
-
Żelazna płyta
9 536
-
Belka żelbetowa
8 251
-
Szybkowód
5 207
-
Wzmocniona żelazna płyta
5 114
-
Blacha z duraluminium
4 630
-
Stalowa rura
3 884
-
Żelazny pręt
3 318
-
Oscylator kryształowy
3 001
-
Przewód
2 871
-
Aluminiowa obudowa
2 250
-
Kabel
1 599
-
Ciężka rama modularna
956
-
Krzemionka
882
-
Złącze wysokiej prędkości
849
-
Wirnik
712
-
Radiowa jednostka kontrolna
435
-
Plastik
386
-
Rama modularna
365
-
Silnik
357
-
Guma
219
-
Ogranicznik SI
210
-
Biomasa
200
-
Superkomputer
28
-
Komputer
16
-
Płytka drukowana
2
-
Yokmosho - 2 kwi 2024, 02:09:15
Darth Bludgeon, I tested the megaprint out to look for any glitching on the smart splitters moving parts to their respective storage bins, all were behaving normally. When parts are filtered, they go through a priority load order. First priority (where applicable) is to load the production machines for ammo production, second would be to fill up the drones and drone ports, then they will start filling up the storage bins.
-
Darth Bludgeon - 25 mar 2024, 12:19:07
Really pretty build, lots of neat stuff... if it worked. Doesn't, for me; got supplies halfway hooked up and realized everything I was loading from the train station was going straight to the sinks. The peripheral chains seemed to work (bio-fuel, slug processing, color cartridges); coal distribution worked (brought that in by drone), batteries filled all the drone ports (but none appeared in the containers) - in fact, nothing appeared in the container area regardless of what or where it was loaded. Nice design, though.
-
-XAZU- the earthdweller - 10 gru 2023, 02:24:43
aaahhh!! i just found the blueprint designer area! so sick!! this is definitely a "i beat the game and don't wanna build the perfect base myself" kinda print. i like it! your architectural sense is leaps and bounds ahead of mine! lol good job!
-
-XAZU- the earthdweller - 10 gru 2023, 02:21:38
wow! what a project! i liked the shooting range!
im still touring it and im sure ive missed a couple of spots but this place is HUGE! theres so much space! very straight forward storage solution tho! and the drone hive idea is power hungry but effective i bet!
ive been peeking around the logistics and it looks stout! 4 lines of incoming items at mk5 speeds!
-
Yokmosho - 9 gru 2023, 03:41:40
Spacepup, I'm humbled by your use of Project P.I.O.N.E.E.R in a YouTube video. I can't say that I've ever expected any of my creations to spawn a video project.
-
spacepup - 7 gru 2023, 00:52:59
i made a short video on this if you wanna check it out! ( https://www.youtube.com/watch?v=L8ygO8Cy938 )