Project P.I.O.N.E.E.R.
Welcome to the Planetary Initiative Organization Nexus/ Engineered Economical Rocket, or Project P.I.O.N.E.E.R. I took a bit of inspiration from the Star Carrier book series by Ian Douglas to make a spaceship themed central hub; utilizing the mushroom cap design used for near light speed travel radiation shielding for the bulk of the factory.
The whole base is more than just a storage hub. There is a hypertube system and bridge that can quickly move a pioneer from the grassy canyon to the upper plateau. There are also 4 P.P.C's (Pioneer Projectile Cannons) utilizing B.E.L.T. loading (Biological Equipment Loading Transjector) capable of sending pioneer nearly anywhere on the map with jet pack/parachute creativity. There is also a prototyping holodeck off of the armory
There is also a full manufacturing setup for processing biomass, slugs, packaged fuel, and ammo/nobelisk production. Production utilizes parts from storage, along with piping in the needed oil and water. You will need to create drone ports to fly in 4 resources:
Coal 120 PPM Sulfur 120 PPM Bauxite: 120 PPM Uranium: 20 PPM
But the best part is the Rapid Part Delivery System. I have a drone port mapped to every part type along with 2 additional drones for use as ammo and supply drops. These drone ports are also connected to the sorting bus; so you can have the drones bring back unneeded parts, wood, leaves, ect. for storage and processing. It takes around 2 minutes at most for any parts to deliver by drone once you have it mapped to a field drone port.
---I've received a few complaints about the storage not showing any parts, which is true only when you first start loading parts. When parts are filtered, they go through a priority load order. First priority (where applicable) is to load the production machines for ammo production, second would be to fill up the drones and drone ports, then they will start filling up the storage bins. Please keep this in mind that it will take time for parts to show in the storage bins, but they will likely show up for drone delivery almost right away.
***For obvious reasons, do not feed WIP items into the sorting bus, the entire thing will end up jamming. I do have filters set up just before the sinks on the sorting line to pull unsinkable items into a storage container, as long as the items can be selected in programmable splitters
Please drop me a line at Yokmosho on Discord with any comments or bugs/issues found
Updates/fixes: 12-3: connection issue before final sinks fixed 12-8: sped up uranium belt to nuke nobelisk production so uranium doesn't back up in the drone port storage and lead to massive amounts of radiation in the base. Also rebuilt the hypertubbe entrance and landing zone at the bottom of the rocket to prevent the "relativistic death cannon" when using the hypertube from the top. 12-11: reversed fill order on packagers to prevent water overflow from taking all containers and stalling. Also replaced a missing merger near the end of the main feed bus that led to an eventual overflow
- Hoeveelheid spullen 39.618
- Coördinaten -25 / 85.038
- Alleen plakken op originele locatie Yes
- Categorieën Architecture Complete factory Interior decorations Exterior decorations Pipes system UPDATE 8
-
Waardering
3 / 5
- Bouw variant 269.772
- Auteur Yokmosho
- Download (1.047x) Download
- Bestandsgrootte 2,13 MB
- Gecreëerd op 3 dec. 2023 16:12:18
- Laatst bijgewerkt op 12 dec. 2023 01:21:33
-
Basic Wall (4 m)
5.084
-
Basic Wall (4 m)
3.055
-
Foundation (1 m)
2.937
-
Frame Fundering
1.579
-
Transportband Mk.5
1.472
-
Metalen Balk
1.267
-
Tilted Wall (4 m)
1.166
-
Label Sign (4 m)
1.070
-
Basic Wall (4 m)
823
-
Balk Verbindingspunt
813
-
Portret Bord
792
-
Klein Reclamebord
696
-
Tilted Wall (8 m)
670
-
Stroomkabel
665
-
Foundation (1 m)
645
-
Frame Vloer
579
-
Transportlift Mk.5
529
-
Square Sign (1 m)
474
-
Square Sign (0.5 m)
463
-
Groot Reclamebord
461
-
Frame Muur
459
-
Foundation (1 m)
457
-
Gespoten Balk
448
-
Tilted Corner Wall (8 m)
446
-
Tilted Wall (8 m)
441
-
Tilted Wall (4 m)
403
-
Zeshoekig Frame Raam
393
-
Vloergat Transportlift
332
-
Transportband samenvoeger
322
-
Uithang bord
315
-
Double Ramp (2 m)
300
-
Foundation (1 m)
293
-
Half Foundation (1 m)
281
-
Wandcontact Mk.1
278
-
Transportband Mk.1
276
-
Pijpleiding Mk.1
267
-
Ondersteuning Transportband
242
-
Kleine Metalen Pilaar
229
-
Basic Wall (1 m)
221
-
Roof (1 m)
216
-
Basic Wall (1 m)
210
-
Transportlift Mk.1
207
-
Basic Wall (1 m)
203
-
Tilted Concave Wall (4 m)
196
-
Ramp Wall (8 m)
188
-
Intelligente verdeler
179
-
Schone Pijpleiding Mk.1
161
-
Grote Metalen Pilaar
153
-
Double Ramp (2 m)
152
-
Inverted Ramp Wall (8 m)
148
-
Tilted Corner Wall (4 m)
134
-
Industriële Opslagcontainer
129
-
Foundation (1 m)
118
-
Plat Dak
114
-
Transportband Plafondmontage
111
-
Moderne Reling
105
-
Hyperbuis Muurondersteuning
98
-
Grote Betonnen Pilaar
96
-
Hyperbuizen
93
-
Ramp Wall (4 m)
88
-
Roof (4 m)
86
-
Tilted Corner Wall (4 m)
86
-
Pijpleidingsondersteuning
85
-
Kleine Betonnen Pilaar
84
-
Tilted Wall (4 m)
82
-
Plafondlamp
79
-
Transportband wandmontage
71
-
Vloeistof Buffer
70
-
Hyperbuis ingang
69
-
Inverted Ramp Wall (4 m)
68
-
Transportbandverdeler
67
-
Pijpleidingsmuursteun
64
-
Geautomatiseerde Poort
60
-
Transportband Mk.3
58
-
Vloergat Pijpleiding
58
-
Pipeline Junction
58
-
Half Foundation (1 m)
45
-
Roof (2 m)
44
-
Tilted Wall (8 m)
44
-
Ramp (4 m)
43
-
Wall-Mounted Flood Light
43
-
Inverted Ramp Wall (1 m)
42
-
Drone Landingsplaats
42
-
Plat Dak
41
-
Loopbrug Helling
40
-
Transportlift Mk.2
40
-
Square Sign (2 m)
37
-
Half Foundation (1 m)
33
-
Muurdoorgang Pijpleiding
33
-
Half Foundation (1 m)
30
-
Transportband Mk.2
29
-
Plat Dak
28
-
Versterkt Raam
28
-
Programmeerbare Splitser
28
-
Stapelbare Ondersteuning Transportband
25
-
Hyperbuisondersteuning
25
-
Roof (2 m)
24
-
Dubbele Balk Verbinder
23
-
Up Corner Ramp (1 m)
22
-
Roof (1 m)
22
-
Opslagcontainer
22
-
Transportband Muur x 2
20
-
Volledig Frame Raam
20
-
Hyperbuis Muurgat
20
-
Rechte Catwalk
19
-
Double Ramp (4 m)
18
-
Ramp Wall (1 m)
18
-
Catwalk Hoek
18
-
Transportlift Mk.3
18
-
Raffinaderij
17
-
Transportband Mk.4
17
-
Roof (1 m)
16
-
Roof (2 m)
16
-
Verpakkingsmachine
16
-
Samensteller
15
-
Double Ramp (8 m)
14
-
Inverted Ramp Wall (2 m)
14
-
Inverted Ramp Wall (1 m)
14
-
Stapelbare Pijpleidingsondersteuning
14
-
Muurdoorgang Hyperbuis
14
-
Dubbel Wandcontact Mk.1
14
-
Label Sign (2 m)
13
-
Assembleerder
13
-
Inner Corner Extension (1 m)
12
-
Ramp Wall (1 m)
12
-
Transportband Muur x 3
11
-
Glazen Frame Fundering
10
-
Half Foundation (1 m)
10
-
Licht Bedieningspaneel
10
-
Ramp Wall (8 m)
10
-
Ramp (1 m)
9
-
Foundation (2 m)
9
-
Poort Opening Muur
9
-
Ramp Wall (4 m)
9
-
Kabelmast Mk.1
9
-
Inverted Ramp (1 m)
8
-
Pijpleidingspomp Mk.2
7
-
Hoogspanningsmast
7
-
Roof (4 m)
6
-
Transportband Muur x 1
6
-
Transportband Muur x 2
6
-
Muur met Deur Midden
5
-
Transportband Muur x 1
5
-
Ramp Wall (4 m)
5
-
Down Corner Ramp (2 m)
4
-
Outer Corner Roof (2 m)
4
-
Ramp Wall (2 m)
4
-
Loopbrug Trap
4
-
AWESOME Afvoer
4
-
Vrachtperron
4
-
Inverted Ramp (2 m)
3
-
Ramp Wall (2 m)
3
-
Inverted Ramp Wall (4 m)
3
-
mixer
3
-
Fabrikator
3
-
Kabelmast Mk.3
3
-
Kabelmast Mk.2
3
-
Foundation (4 m)
2
-
Ramp (4 m)
2
-
Down Corner Ramp (4 m)
2
-
Up Corner Ramp (4 m)
2
-
Ramp (2 m)
2
-
Roof (4 m)
2
-
Outer Corner Roof (4 m)
2
-
Steunbalk
2
-
Inverted Ramp Wall (4 m)
2
-
Tilted Concave Wall (4 m)
2
-
Poort Opening Muur
2
-
Muur met Deur Zijkant
2
-
Industriële Reling
2
-
Label Sign (3 m)
2
-
Springbronontginner
2
-
Waterpomp
2
-
Smeltoven
2
-
Transportlift Mk.4
2
-
Inverted Up Corner (1 m)
1
-
Outer Corner Roof (4 m)
1
-
Muur met Deur Zijkant
1
-
Poort Opening Muur
1
-
Tilted Corner Wall (4 m)
1
-
Transportband Muur x 3
1
-
Inverted Ramp Wall (1 m)
1
-
Muur met Deur Zijkant
1
-
Muur met Deur Midden
1
-
Ladder
1
-
Werkbank
1
-
Uitrustingswerkplaats
1
-
Blueprint Designer Mk.1
1
-
Grondstof Aardbron Drukregelaar
1
-
Springkussen
1
-
U-Jelly landingsplaats
1
-
Pijpleidingspomp Mk.1
1
-
Treinstation
1
-
Blok Seinpaal
1
-
Stroomschakelaar
1
-
Beton
68.033
-
Stalen balk
24.016
-
Kwartskristal
17.010
-
IJzeren plaat
15.621
-
Koperen plaat
14.069
-
Gewapend Betonnen Balk
8.223
-
Hogesnelheidsdraad
5.207
-
Versterkte ijzeren plaat
5.114
-
Alcladaluminiumplaat
4.680
-
Stalen pijp
3.884
-
IJzeren Stang
3.318
-
Draad
3.271
-
Kristaloscillator
3.001
-
Aluminium behuizing
2.270
-
Kunststof
1.564
-
Kabel
1.474
-
Siliciumdioxide
1.190
-
Zwaar modulair frame
930
-
Hogesnelheidsverbinding
849
-
rotor
712
-
Radiografische controle-eenheid
430
-
Modulair frame
425
-
AI-begrenzer
350
-
motor
344
-
Rubber
269
-
Biomassa
200
-
Computer
87
-
Yokmosho - 2 apr. 2024 02:09:15
Darth Bludgeon, I tested the megaprint out to look for any glitching on the smart splitters moving parts to their respective storage bins, all were behaving normally. When parts are filtered, they go through a priority load order. First priority (where applicable) is to load the production machines for ammo production, second would be to fill up the drones and drone ports, then they will start filling up the storage bins.
-
Darth Bludgeon - 25 mrt. 2024 12:19:07
Really pretty build, lots of neat stuff... if it worked. Doesn't, for me; got supplies halfway hooked up and realized everything I was loading from the train station was going straight to the sinks. The peripheral chains seemed to work (bio-fuel, slug processing, color cartridges); coal distribution worked (brought that in by drone), batteries filled all the drone ports (but none appeared in the containers) - in fact, nothing appeared in the container area regardless of what or where it was loaded. Nice design, though.
-
-XAZU- the earthdweller - 10 dec. 2023 02:24:43
aaahhh!! i just found the blueprint designer area! so sick!! this is definitely a "i beat the game and don't wanna build the perfect base myself" kinda print. i like it! your architectural sense is leaps and bounds ahead of mine! lol good job!
-
-XAZU- the earthdweller - 10 dec. 2023 02:21:38
wow! what a project! i liked the shooting range!
im still touring it and im sure ive missed a couple of spots but this place is HUGE! theres so much space! very straight forward storage solution tho! and the drone hive idea is power hungry but effective i bet!
ive been peeking around the logistics and it looks stout! 4 lines of incoming items at mk5 speeds!
-
Yokmosho - 9 dec. 2023 03:41:40
Spacepup, I'm humbled by your use of Project P.I.O.N.E.E.R in a YouTube video. I can't say that I've ever expected any of my creations to spawn a video project.
-
spacepup - 7 dec. 2023 00:52:59
i made a short video on this if you wanna check it out! ( https://www.youtube.com/watch?v=L8ygO8Cy938 )