Project P.I.O.N.E.E.R.
Welcome to the Planetary Initiative Organization Nexus/ Engineered Economical Rocket, or Project P.I.O.N.E.E.R. I took a bit of inspiration from the Star Carrier book series by Ian Douglas to make a spaceship themed central hub; utilizing the mushroom cap design used for near light speed travel radiation shielding for the bulk of the factory.
The whole base is more than just a storage hub. There is a hypertube system and bridge that can quickly move a pioneer from the grassy canyon to the upper plateau. There are also 4 P.P.C's (Pioneer Projectile Cannons) utilizing B.E.L.T. loading (Biological Equipment Loading Transjector) capable of sending pioneer nearly anywhere on the map with jet pack/parachute creativity. There is also a prototyping holodeck off of the armory
There is also a full manufacturing setup for processing biomass, slugs, packaged fuel, and ammo/nobelisk production. Production utilizes parts from storage, along with piping in the needed oil and water. You will need to create drone ports to fly in 4 resources:
Coal 120 PPM Sulfur 120 PPM Bauxite: 120 PPM Uranium: 20 PPM
But the best part is the Rapid Part Delivery System. I have a drone port mapped to every part type along with 2 additional drones for use as ammo and supply drops. These drone ports are also connected to the sorting bus; so you can have the drones bring back unneeded parts, wood, leaves, ect. for storage and processing. It takes around 2 minutes at most for any parts to deliver by drone once you have it mapped to a field drone port.
---I've received a few complaints about the storage not showing any parts, which is true only when you first start loading parts. When parts are filtered, they go through a priority load order. First priority (where applicable) is to load the production machines for ammo production, second would be to fill up the drones and drone ports, then they will start filling up the storage bins. Please keep this in mind that it will take time for parts to show in the storage bins, but they will likely show up for drone delivery almost right away.
***For obvious reasons, do not feed WIP items into the sorting bus, the entire thing will end up jamming. I do have filters set up just before the sinks on the sorting line to pull unsinkable items into a storage container, as long as the items can be selected in programmable splitters
Please drop me a line at Yokmosho on Discord with any comments or bugs/issues found
Updates/fixes: 12-3: connection issue before final sinks fixed 12-8: sped up uranium belt to nuke nobelisk production so uranium doesn't back up in the drone port storage and lead to massive amounts of radiation in the base. Also rebuilt the hypertubbe entrance and landing zone at the bottom of the rocket to prevent the "relativistic death cannon" when using the hypertube from the top. 12-11: reversed fill order on packagers to prevent water overflow from taking all containers and stalling. Also replaced a missing merger near the end of the main feed bus that led to an eventual overflow
- Contagem de itens 39.618
- Coordenadas -25 / 85.038
- Apenas colocar na posição original Yes
- Categorias Architecture Complete factory Interior decorations Exterior decorations Pipes system UPDATE 8
-
Avaliação
3 / 5
- Versão do jogo 269.772
- Autor Yokmosho
- Baixar (1.056x) Baixar
- Tamanho do ficheiro 2,13 MB
- Criado em 03/12/2023 16:12:18
- Última atualização em 12/12/2023 01:21:33
-
Parede báscia 4m
5.084
-
Parede báscia 4m
3.055
-
Fundação 1m
2.937
-
Fundação de esquadria
1.579
-
Esteira de transporte v.5
1.472
-
Viga de metal
1.267
-
Parede inclinada 4m
1.166
-
Placa de identificação 4m
1.070
-
Parede báscia 4m
823
-
Conector de Vigas
813
-
Placa de Retrato
792
-
Painel pequeno
696
-
Parede inclinada 8m
670
-
Cabo elétrico
665
-
Fundação 1m
645
-
Chão de esquadria
579
-
Esteira vertical v.5
529
-
Placa quadrada 1m
474
-
Placa quadrada 50cm
463
-
Painel grande
461
-
Parede de esquadria
459
-
Fundação 1m
457
-
Viga pintada
448
-
Parede de Canto Inclinada 8m
446
-
Parede inclinada 8m
441
-
Parede inclinada 4m
403
-
Janela de esquadria hexagonal
393
-
Buraco de chão para esteira vertical
332
-
Unificador de esteira
322
-
Placa de Indicação
315
-
Rampa dupla 2m
300
-
Fundação 1m
293
-
Metade da fundação 1 m
281
-
Conector de energia de Parede v.1
278
-
Esteira de Transporte v.1
276
-
Tubulação v.1
267
-
Suporte de esteira
242
-
Pilar de metal pequeno
229
-
Parede básica 1m
221
-
Telhado 1 m
216
-
Parede básica 1m
210
-
Elevador de transporte v.1
207
-
Parede básica 1m
203
-
Parede Concava Inclinada 4 m
196
-
Parede de Rampa 8m
188
-
Divisor inteligente
179
-
Tubulação v1 (sem indicador)
161
-
Pilar de metal grande
153
-
Rampa dupla 2m
152
-
Parede de rampa invertida 8m
148
-
Parede de canto inclinada 4m
134
-
Contêiner de armazenamento industrial
129
-
Fundação 1m
118
-
Telhado plano
114
-
Suporte de Teto para Esteira
111
-
Corrimão moderno
105
-
Suporte de parede para Hipertubo
98
-
Pilar de concreto grande
96
-
Hipertubo
93
-
Parede de rampa 4m
88
-
Telhado 4 m
86
-
Parede de canto inclinada 4m
86
-
Suporte para Tubulação
85
-
Pilar de concreto pequeno
84
-
Parede inclinada 4m
82
-
Luz de teto
79
-
Suporte de Parede para Esteira
71
-
Tanque de fluido
70
-
Entrada de Hipertubo
69
-
Parede de rampa invertida 4m
68
-
Divisor de esteira
67
-
Suporte de parede para tubulação
64
-
Portão automático
60
-
Esteira de transporte v.3
58
-
Abertura de Chão para Tubulação
58
-
Cruzamento de junção de tubulação
58
-
Metade da fundação 1 m
45
-
Telhado 2 m
44
-
Parede inclinada 8m
44
-
Rampa 4m
43
-
Holofotes de parede
43
-
Parede de rampa invertida 1m
42
-
Hangar de drone
42
-
Telhado plano
41
-
Rampa de Passarela
40
-
Elevador de transporte v.2
40
-
Placa quadrada 2m
37
-
Metade da fundação 1 m
33
-
Suporte de parede para tubulação
33
-
Metade da fundação 1 m
30
-
Esteira de transporte v.2
29
-
Telhado plano
28
-
Janela reforçada
28
-
Divisor programável
28
-
Suporte empilhável de Esteira
25
-
Suporte de hipertubo
25
-
Telhado 2 m
24
-
Conector duplo de vigas
23
-
Rampa de canto para cima 1m
22
-
Telhado 1 m
22
-
Contêiner de armazenamento
22
-
Parede com duas passagens de esteira
20
-
Janela de esquadria completa
20
-
Abertura de Chão para Hipertubo
20
-
Passarela reta
19
-
Rampa dupla 4m
18
-
Parede de rampa 1m
18
-
Canto de Passarela
18
-
Elevador de transporte v.3
18
-
Refinaria
17
-
Esteira de transporte v.4
17
-
Telhado 1 m
16
-
Telhado 2 m
16
-
Embaladora
16
-
Construtor
15
-
Rampa dupla 8m
14
-
Parede de rampa invertida 2m
14
-
Parede de rampa invertida 1m
14
-
Suporte empilhável de Tubulação
14
-
Abertura de Parede para Hipertubo
14
-
Conector de energia de Parede Duplo v.1
14
-
Placa de identificação 2m
13
-
Montadora
13
-
Extensão de canto interno 1m
12
-
Parede de rampa 1m
12
-
Parede com três passagens de esteira
11
-
Fundação de esquadria com vidro
10
-
Metade da fundação 1 m
10
-
Painel de controle de iluminação
10
-
Parede de Rampa 8m
10
-
Rampa 1m
9
-
Fundação 2m
9
-
Parede com abertura para portão
9
-
Parede de rampa 4m
9
-
Poste de Energia v.1
9
-
Rampa invertida 1m
8
-
Bomba de Tubulação v.2
7
-
Torre de energia
7
-
Telhado 4 m
6
-
Parede com Passagem de Esteira x1
6
-
Parede com duas passagens de esteira
6
-
Parede com porta central
5
-
Parede com Passagem de Esteira x1
5
-
Parede de rampa 4m
5
-
Rampa de canto para baixo 2m
4
-
Telhado de canto externo 2 m
4
-
Parede de rampa 2m
4
-
Escadas de Passarela
4
-
Triturador SUPIMPA
4
-
Plataforma de carga
4
-
Rampa invertida 2m
3
-
Parede de rampa 2m
3
-
Parede de rampa invertida 4m
3
-
Misturador
3
-
Fabricante
3
-
Poste de energia v.3
3
-
Poste de energia v.2
3
-
Fundação 4m
2
-
Rampa 4m
2
-
Rampa de canto para baixo 4m
2
-
Rampa de canto para cima 4m
2
-
Rampa 2m
2
-
Telhado 4 m
2
-
Telhado de canto externo 4 m
2
-
Suporte de viga
2
-
Parede de rampa invertida 4m
2
-
Parede Concava Inclinada 4 m
2
-
Parede com abertura para portão
2
-
Parede com porta lateral
2
-
Corrimão industrial
2
-
Placa de identificação 3m
2
-
Extrator de poço de recurso
2
-
Bomba d\'água
2
-
Fornalha
2
-
Esteira vertical v.4
2
-
Canto para cima invertido 1m
1
-
Telhado de canto externo 4 m
1
-
Parede com porta lateral
1
-
Parede com abertura para portão
1
-
Parede de canto inclinada 4m
1
-
Parede com três passagens de esteira
1
-
Parede de rampa invertida 1m
1
-
Parede com porta lateral
1
-
Parede com porta central
1
-
Escada
1
-
Bancada de Produção
1
-
Oficina de equipamentos
1
-
Designer de Projetos
1
-
Pressurizador de poço de recurso
1
-
Plataforma de salto
1
-
Base de gelatina para aterrissagem
1
-
Bomba de Tubulação v.1
1
-
Estação de trem
1
-
Sinal de trecho
1
-
Interruptor
1
-
Concreto
63.202
-
Viga de Aço
17.979
-
Cristal de quartzo
17.010
-
Chapa de Cobre
14.070
-
Chapa de Ferro
9.536
-
Viga industrial revestida
8.251
-
Fio-veloz
5.207
-
Chapa de Ferro reforçada
5.114
-
Chapa de Duralumínio
4.630
-
Tubulação de Aço
3.884
-
Barra de ferro
3.318
-
Oscilador de Cristal
3.001
-
Fio
2.871
-
Caixote de alumínio
2.250
-
Cabo
1.599
-
Armação modular pesada
956
-
Sílica
882
-
Conector de alta velocidade
849
-
Rotor
712
-
Unidade de controle de rádio
435
-
Plástico
386
-
Armação modular
365
-
Motor
357
-
Borracha
219
-
Limitador da I.A.
210
-
Biomassa
200
-
Supercomputador
28
-
Computador
16
-
Placa de circuito
2
-
Yokmosho - 02/04/2024 02:09:15
Darth Bludgeon, I tested the megaprint out to look for any glitching on the smart splitters moving parts to their respective storage bins, all were behaving normally. When parts are filtered, they go through a priority load order. First priority (where applicable) is to load the production machines for ammo production, second would be to fill up the drones and drone ports, then they will start filling up the storage bins.
-
Darth Bludgeon - 25/03/2024 12:19:07
Really pretty build, lots of neat stuff... if it worked. Doesn't, for me; got supplies halfway hooked up and realized everything I was loading from the train station was going straight to the sinks. The peripheral chains seemed to work (bio-fuel, slug processing, color cartridges); coal distribution worked (brought that in by drone), batteries filled all the drone ports (but none appeared in the containers) - in fact, nothing appeared in the container area regardless of what or where it was loaded. Nice design, though.
-
-XAZU- the earthdweller - 10/12/2023 02:24:43
aaahhh!! i just found the blueprint designer area! so sick!! this is definitely a "i beat the game and don't wanna build the perfect base myself" kinda print. i like it! your architectural sense is leaps and bounds ahead of mine! lol good job!
-
-XAZU- the earthdweller - 10/12/2023 02:21:38
wow! what a project! i liked the shooting range!
im still touring it and im sure ive missed a couple of spots but this place is HUGE! theres so much space! very straight forward storage solution tho! and the drone hive idea is power hungry but effective i bet!
ive been peeking around the logistics and it looks stout! 4 lines of incoming items at mk5 speeds!
-
Yokmosho - 09/12/2023 03:41:40
Spacepup, I'm humbled by your use of Project P.I.O.N.E.E.R in a YouTube video. I can't say that I've ever expected any of my creations to spawn a video project.
-
spacepup - 07/12/2023 00:52:59
i made a short video on this if you wanna check it out! ( https://www.youtube.com/watch?v=L8ygO8Cy938 )