Project P.I.O.N.E.E.R.




Welcome to the Planetary Initiative Organization Nexus/ Engineered Economical Rocket, or Project P.I.O.N.E.E.R. I took a bit of inspiration from the Star Carrier book series by Ian Douglas to make a spaceship themed central hub; utilizing the mushroom cap design used for near light speed travel radiation shielding for the bulk of the factory.
The whole base is more than just a storage hub. There is a hypertube system and bridge that can quickly move a pioneer from the grassy canyon to the upper plateau. There are also 4 P.P.C's (Pioneer Projectile Cannons) utilizing B.E.L.T. loading (Biological Equipment Loading Transjector) capable of sending pioneer nearly anywhere on the map with jet pack/parachute creativity. There is also a prototyping holodeck off of the armory
There is also a full manufacturing setup for processing biomass, slugs, packaged fuel, and ammo/nobelisk production. Production utilizes parts from storage, along with piping in the needed oil and water. You will need to create drone ports to fly in 4 resources:
Coal 120 PPM Sulfur 120 PPM Bauxite: 120 PPM Uranium: 20 PPM
But the best part is the Rapid Part Delivery System. I have a drone port mapped to every part type along with 2 additional drones for use as ammo and supply drops. These drone ports are also connected to the sorting bus; so you can have the drones bring back unneeded parts, wood, leaves, ect. for storage and processing. It takes around 2 minutes at most for any parts to deliver by drone once you have it mapped to a field drone port.
---I've received a few complaints about the storage not showing any parts, which is true only when you first start loading parts. When parts are filtered, they go through a priority load order. First priority (where applicable) is to load the production machines for ammo production, second would be to fill up the drones and drone ports, then they will start filling up the storage bins. Please keep this in mind that it will take time for parts to show in the storage bins, but they will likely show up for drone delivery almost right away.
***For obvious reasons, do not feed WIP items into the sorting bus, the entire thing will end up jamming. I do have filters set up just before the sinks on the sorting line to pull unsinkable items into a storage container, as long as the items can be selected in programmable splitters
Please drop me a line at Yokmosho on Discord with any comments or bugs/issues found
Updates/fixes: 12-3: connection issue before final sinks fixed 12-8: sped up uranium belt to nuke nobelisk production so uranium doesn't back up in the drone port storage and lead to massive amounts of radiation in the base. Also rebuilt the hypertubbe entrance and landing zone at the bottom of the rocket to prevent the "relativistic death cannon" when using the hypertube from the top. 12-11: reversed fill order on packagers to prevent water overflow from taking all containers and stalling. Also replaced a missing merger near the end of the main feed bus that led to an eventual overflow
- Antall gjenstander 39 618
- Koordinater −25 / 85 038
- Lim inn på originalstedet Yes
- Kategorier Architecture Complete factory Interior decorations Exterior decorations Pipes system UPDATE 8
-
Vurdering
3 / 5
- Spillversjon 269 772
- Forfatter Yokmosho
- Last ned (780x) Last ned
- Filstørrelse 2٫13 MB
- Lastet opp den 3. des. 2023, 16:12:18
- Sist oppdatert den 12. des. 2023, 01:21:33
-
Basic Wall (4 m) 5 084
-
Basic Wall (4 m) 3 055
-
Foundation (1 m) 2 937
-
Rammefundament 1 579
-
Transportbånd Mk.5 1 472
-
Stålbjelke 1 267
-
Tilted Wall (4 m) 1 166
-
Label Sign (4 m) 1 070
-
Basic Wall (4 m) 823
-
Bjelketilkobling 813
-
Portrettskilt 792
-
Liten reklametavle 696
-
Tilted Wall (8 m) 670
-
Strømlinje 665
-
Foundation (1 m) 645
-
Rammegulv 579
-
Transportbåndheis Mk.5 529
-
Square Sign (1 m) 474
-
Square Sign (0.5 m) 463
-
Stor reklametavle 461
-
Rammevegg 459
-
Foundation (1 m) 457
-
Malt bjelke 448
-
Tilted Corner Wall (8 m) 446
-
Tilted Wall (8 m) 441
-
Tilted Wall (4 m) 403
-
Trekantede vindusrammer 393
-
Gulvhull for transportbåndheis 332
-
Transportbånd-samler 322
-
Visningsskilt 315
-
Double Ramp (2 m) 300
-
Foundation (1 m) 293
-
Half Foundation (1 m) 281
-
Veggpol Mk.1 278
-
Transportbånd Mk.1 276
-
Rørledning Mk.1 267
-
Transportbåndstolpe 242
-
Liten metallpilar 229
-
Basic Wall (1 m) 221
-
Roof (1 m) 216
-
Basic Wall (1 m) 210
-
Transportbåndheis Mk.1 207
-
Basic Wall (1 m) 203
-
Tilted Concave Wall (4 m) 196
-
Ramp Wall (8 m) 188
-
Smartsplitter 179
-
Plettfri rørledning Mk.1 161
-
Stor metallpilar 153
-
Double Ramp (2 m) 152
-
Inverted Ramp Wall (8 m) 148
-
Tilted Corner Wall (4 m) 134
-
Industriell lagringsconteiner 129
-
Foundation (1 m) 118
-
Flatt tak 114
-
Båndstøtte for himling 111
-
Moderne rekkverk 105
-
Hyperrør-veggstøtte 98
-
Stor betongpilar 96
-
Hyperrør 93
-
Ramp Wall (4 m) 88
-
Roof (4 m) 86
-
Tilted Corner Wall (4 m) 86
-
Rørledningstolpe 85
-
Liten betongpilar 84
-
Tilted Wall (4 m) 82
-
Taklampe 79
-
Båndstøtte for vegg 71
-
Væskebuffer 70
-
Hyperrørinngang 69
-
Inverted Ramp Wall (4 m) 68
-
Transportbånd-splitter 67
-
Rørledningstøtte for vegg 64
-
Automatisert port 60
-
Transportbånd Mk.3 58
-
Gulvhull for rørledning 58
-
Rørkryss 58
-
Half Foundation (1 m) 45
-
Roof (2 m) 44
-
Tilted Wall (8 m) 44
-
Ramp (4 m) 43
-
Veggmontert flomlys 43
-
Inverted Ramp Wall (1 m) 42
-
Droneplatform 42
-
Flatt tak 41
-
Plattformrampe 40
-
Transportbåndheis Mk.2 40
-
Square Sign (2 m) 37
-
Half Foundation (1 m) 33
-
Rørledningshull i vegg 33
-
Half Foundation (1 m) 30
-
Transportbånd Mk.2 29
-
Flatt tak 28
-
Forsterket vindu i stålvegg 28
-
Programmerbar Splitter 28
-
Stabelbar båndstøtte 25
-
Hyperrørstøtte 25
-
Roof (2 m) 24
-
Dobbel bjelketilkobling 23
-
Up Corner Ramp (1 m) 22
-
Roof (1 m) 22
-
Lagringscontainer 22
-
Conveyor Wall x 2 20
-
Helglass-vindu 20
-
Hyperrørgulvhull 20
-
Rett platform 19
-
Double Ramp (4 m) 18
-
Ramp Wall (1 m) 18
-
Plattformhjørne 18
-
Transportbåndheis Mk.3 18
-
Raffineri 17
-
Transportbånd Mk.4 17
-
Roof (1 m) 16
-
Roof (2 m) 16
-
Tapper 16
-
Konstruktør 15
-
Double Ramp (8 m) 14
-
Inverted Ramp Wall (2 m) 14
-
Inverted Ramp Wall (1 m) 14
-
Stabelbar rørstøtte 14
-
Hyperrørvegghull 14
-
Dobbel veggpol Mk.1 14
-
Label Sign (2 m) 13
-
Montør 13
-
Inner Corner Extension (1 m) 12
-
Ramp Wall (1 m) 12
-
Conveyor Wall x 3 11
-
Glassramme-fundament 10
-
Half Foundation (1 m) 10
-
Kontrollpanel for lys 10
-
Ramp Wall (8 m) 10
-
Ramp (1 m) 9
-
Foundation (2 m) 9
-
Stålvegg med portåpning 9
-
Ramp Wall (4 m) 9
-
Strømstolpe Mk.1 9
-
Inverted Ramp (1 m) 8
-
Rørledningspumpe Mk.2 7
-
Kraftmast 7
-
Roof (4 m) 6
-
Conveyor Wall x 1 6
-
Conveyor Wall x 2 6
-
Stålvegg med dør midt i 5
-
Conveyor Wall x 1 5
-
Ramp Wall (4 m) 5
-
Down Corner Ramp (2 m) 4
-
Outer Corner Roof (2 m) 4
-
Ramp Wall (2 m) 4
-
Plattformtrapp 4
-
EKSPERT-kvern 4
-
Kontainerterminal 4
-
Inverted Ramp (2 m) 3
-
Ramp Wall (2 m) 3
-
Inverted Ramp Wall (4 m) 3
-
Blander 3
-
Produsent 3
-
Strømstolpe Mk.3 3
-
Strømstolpe Mk.2 3
-
Foundation (4 m) 2
-
Ramp (4 m) 2
-
Down Corner Ramp (4 m) 2
-
Up Corner Ramp (4 m) 2
-
Ramp (2 m) 2
-
Roof (4 m) 2
-
Outer Corner Roof (4 m) 2
-
Bjelkefundament 2
-
Inverted Ramp Wall (4 m) 2
-
Tilted Concave Wall (4 m) 2
-
Stålvegg med portåpning 2
-
Stålvegg med dør til siden 2
-
Industrielt rekkverk 2
-
Label Sign (3 m) 2
-
Ressursbrønnutvinner 2
-
Vannsamler 2
-
Smeltere 2
-
Transportbåndheis Mk.4 2
-
Inverted Up Corner (1 m) 1
-
Outer Corner Roof (4 m) 1
-
Stålvegg med dør til siden 1
-
Stålvegg med portåpning 1
-
Tilted Corner Wall (4 m) 1
-
Conveyor Wall x 3 1
-
Inverted Ramp Wall (1 m) 1
-
Stålvegg med dør til siden 1
-
Stålvegg med dør midt i 1
-
Stige 1
-
Arbeidsbenk 1
-
Utstyrsverksted 1
-
Byggeplanmakeren Mk.1 1
-
Ressursbrønn-trykksetter 1
-
Sprettplate 1
-
U-gelé landingsplattform 1
-
Rørledningspumpe Mk.1 1
-
Jernbanestasjon 1
-
Seksjonssignal 1
-
Strømbryter 1
-
Betong 68 033
-
Stålbjelke 24 016
-
Kvartskrystall 17 010
-
Jernplate 15 621
-
Kobbertynnplate 14 069
-
Innkapslet Stålbjelke 8 223
-
Kvikktråd 5 207
-
Forsterket jernplate 5 114
-
Korrosjonsbestandig aluminiumsplate 4 680
-
Stålrør 3 884
-
Jernstav 3 318
-
Kobbertråd 3 271
-
Krystalloscillator 3 001
-
Aluminiumkabinet 2 270
-
Plast 1 564
-
Kabel 1 474
-
Silika 1 190
-
Tung modulær ramme 930
-
Høyhastighetstilkobling 849
-
Rotor 712
-
Radiokontrollenhet 430
-
Modulær ramme 425
-
KI-begrense 350
-
Motor 344
-
Gummi 269
-
Biomasse 200
-
Datamaskin 87
-
Yokmosho - 2. apr. 2024, 02:09:15
Darth Bludgeon, I tested the megaprint out to look for any glitching on the smart splitters moving parts to their respective storage bins, all were behaving normally. When parts are filtered, they go through a priority load order. First priority (where applicable) is to load the production machines for ammo production, second would be to fill up the drones and drone ports, then they will start filling up the storage bins.
-
Darth Bludgeon - 25. mar. 2024, 12:19:07
Really pretty build, lots of neat stuff... if it worked. Doesn't, for me; got supplies halfway hooked up and realized everything I was loading from the train station was going straight to the sinks. The peripheral chains seemed to work (bio-fuel, slug processing, color cartridges); coal distribution worked (brought that in by drone), batteries filled all the drone ports (but none appeared in the containers) - in fact, nothing appeared in the container area regardless of what or where it was loaded. Nice design, though.
-
-XAZU- the earthdweller - 10. des. 2023, 02:24:43
aaahhh!! i just found the blueprint designer area! so sick!! this is definitely a "i beat the game and don't wanna build the perfect base myself" kinda print. i like it! your architectural sense is leaps and bounds ahead of mine! lol good job!
-
-XAZU- the earthdweller - 10. des. 2023, 02:21:38
wow! what a project! i liked the shooting range!
im still touring it and im sure ive missed a couple of spots but this place is HUGE! theres so much space! very straight forward storage solution tho! and the drone hive idea is power hungry but effective i bet!
ive been peeking around the logistics and it looks stout! 4 lines of incoming items at mk5 speeds!
-
Yokmosho - 9. des. 2023, 03:41:40
Spacepup, I'm humbled by your use of Project P.I.O.N.E.E.R in a YouTube video. I can't say that I've ever expected any of my creations to spawn a video project.
-
spacepup - 7. des. 2023, 00:52:59
i made a short video on this if you wanna check it out! ( https://www.youtube.com/watch?v=L8ygO8Cy938 )