A new project is online: https://satisfactory-calculator.com/en/megaprints/index/details/id/1580/name/Swamp+Reactors+383.7+GW+-+No+Waste

Thank You @Elaine for your detailed description how to optimize this thing :) I already have built an entirely new power plant since Release 1.0 came out. The new plant is located in the swamp and produces loads of power, using uranium fuel rods, plutonium fuel rods and ficsonium. It is a extremly complicated thing, but it works very well. But the plant will collide with any train network running through the swamp, so you will have to prepare your network before importing this beast. Still you will find enough things to optimize in that plant, i will upload the megaprint next week

Any idea when i load this into my save there are no power cables or pipes connected to anything ?

Works well with this Rail network https://satisfactory-calculator.com/en/megaprints/index/details/id/1219/name/Worldwide+Rail+Network+%28240km%29

How do i add this mega blueprint into my world?

Working well with Athrax's Worldwide Rail Network (240km) thanks for the Blueprint

Additional thing for saving power consumption is that you can underclock the Water Extractors which are connected to the production factor. There are 6 Extractors for each annex and 24 in total, all fully overclocked to produce 300 Waters p/m. The required amount of Waters to be underclocked for each production is as follows (the amount of being saved is in bracket): 240(60) to 3 refineries for Sulfuric Acid production in the 1st floor, 180(120) to 2 refineries for Concretes production in the 1st floor, 212(88) to 6 refineries for Caterium and Copper Ores in the 1st floor, 75(225) to 3 refineries for Copper Sheets production in the 1st floor, 182.267(117.733) to 3 refineries for Alumina Solution and Copper Sheets production in the 2nd floor, 182.167(117.833) to 4 refineries for Caterium and Copper Ores + Sulfuric Acid production in the 2nd floor.

Please note that the above numbers are for each annex and Waters for Concretes production is calculated after finished adjustment from 45 to 54 as I mentioned before.

I forgot to add the increased amount of Limestones requirement after Concretes production is adjusted, which is 216(864).

FYI I calculated the total required amount of all resources per minute for each and 4 annex as follows (the grand total for 4 annex is in bracket): 356.75(1,427) Iron Ores, 64(256) Copper Ores, 202.5(810) Limestones, 393(1,527) Coals, 67.5(270) Raw Quartz, 307.5(1,230) Sulfurs, 284(1,136) Caterium Ores, 116.667(466.668) Bauxites, 225(900) Crude Oils, 270(1,080) Nitrogen Gas.

One thing you need to do before starting production is to adjust Concretes production of refinery from 45 to 54, which is in the 1st floor and connected to 3 assemblers for Encased Industrial Beams, the same one I mentioned in the above. This is because each assembler requires 18 Concretes for producting 3 Encased Industrial Beams and total of 54 Concretes for 9 Beams, but only one refinery is connected to them for distribution which is producing 45 Concretes in default setting.

Also you can reduce the required amount of Iron Ores to 320.75(1,283) and Coals to 357(1,428) by adjusting Steel Ingots production of 3 foundries from 48 to 36 p/m each, which are in the 1st floor and connected to 3 assemblers for Steel Beams production. This is because those 3 assemblers are producing 12 each and 36 total Steel Beams for producing 3 each and 9 total Encased Industrial Beams, but the required Steel Beams for that production are 9 each and 27 total. So reducing Steel beams production results in reduced Steel Ingots requirement, from 48 Ingots for 36 Beams to 36 Ingots for 27 Beams.

Can you please tell me how many resources need to be supplied to the railway stations so that everything works well. I would be very grateful.

@Esplicit: just send the trains to your miners to bring in the needed ressources. Connect the track to your train network.

@The Admiral480: So why did i not use better recipies.. well i just didn't. Why did i not build it better or more efficient... i could have, yes. i am not satisfied with the end result of the plant. But in the end it works fine. i plan to build a new one after 1.0 is released, in addition to a brand new train network on the entire map. Still I wonder why you don't build a plant the way you would do it and upload it as a megaprint. I'd love to see your approach.

Okay, one concern I have is this... why aren't you using better recipies for Steel Ingots such as using Solid Steel Ingots, or making things better rather than running THREE different parallel production lines for a singular manufacturuer at the end before it gets turned into power? I do understand it may not have existed but there is a VERY limited amount of resources a singular person can extract from one location and that's without the transportation nonsense.

What are you supposed to do with the trains? Can you run them all on one track?

@Darkstar198: Thank you. I guess the factory is too big to make it a blueprint. But feel free to try using a savegame of yours in the interactive map. Unfortunately i won't get into the game or the editor during the next months so i am not able to help you with that.

is it possible to make the factory them self's a blueprint because i love the way you have them setup and want to use them for a build with the refined power mod

DZIEKI :)

@Gutek87: Please check this website how to use the interactive map and how to import blueprints/megaprints in your save.

Hello. please indicate where to paste the downloaded file

Nice power plant. Thank you very much for hard work.