Swamp Advanced Computer Factory

Multi-product factory in the east swamplands and plateau north of the swamplands.

Requirements:

Note that because of the high level products being produced, there are a high number of dependencies with my other megaprints:

Required materials are delivered by train. If you don't want to use the above megaprints, please deliver via train Radios and Quantum Oscillators.

Logistics

After pasting my Swamp Resources megaprint, connect the power connectors, belts and pipes under the main road between the swamp buildings. Connect the transmission pylons to the buildings on the plateau.

Production:

Cooling Systems Building

  • Cooling Device blenders x 12
  • Heat Sink assemblers x 6
  • Heat Exchanger assemblers x 11
  • Alclad Casings assemblers x 3
  • Alclad Aluminium Sheet assemblers x 8
  • AI Limiter assemblers x 2
  • Fused Quickwire assemblers x 2
  • Copper sheet constructors x 20

Motor Building

  • Motor assemblers x 6
  • Control Rod assemblers x 2
  • Stator assemblers x 14
  • Steel Rotor assemblers x 12
  • Fused Wire assemblers x 12

Versatile Framework Building

  • Versatile Framework assemblers x 3
  • Bolted Frame assemblers x 2
  • Reinforced Iron Plate x 3
  • Iron Plate constructors x 4
  • Cast Screw constructors x 8

Magnetic Generator Building

  • Magnetic Field Generator assemblers x 6
  • OC Supercomputer assemblers x 6

Quantum Encoder Building

  • Excited Photonic Matter converters x 3
  • AI Expansion Server encoders x 3
  • Neural-Quantum Processor encoder x 4

Singularity Cell Building

This is the building on the north plateau, and is used to sink excess dark matter by converting it into crystals. If you want to use it to produce Singularity Cells, you will need to supply Nuclear Pasta via drone.

Modded Content:

Please note that I use oversized pieces in this blueprint.

Version History

  • V2.0 Now fixed for update 4.
  • V3.0 Fixed for update 6 map.
  • V3.1 Replaced floors under manufacturers / assemblers with normal sized pieces. Removed AI limiters from production to allow for more radio control units. Minor conveyor balancing improvements.
  • V3.2 Fixed conveyor lift to adaptive control units, thanks to comment feedback below.
  • V4.0 Moved circuit tower into the swamp, now part of this blueprint.
  • V5.0 Retooled for advanced computer products in Release 1.0 version
  • Hodnocení
    4 / 5
  • Verze 385 279
  • Autor xbb1024
  • Stáhnout (7 852x) Stáhnout
  • Velikost souboru 1,02 MB
  • Vytvořeno 26. 11. 2020 7:05:58
  • Naposledy aktualizováno 3. 3. 2025 9:30:30
  • Holden486 - 4. 7. 2024 20:36:57

    cool building designs, but overall very inefficient due to no use of overclocking. you'd save a vast amount of space, machines, and frame rate reduction by overclocking buildings. hope you make some efficient setups in future

  • NeoMod - 23. 4. 2024 17:08:34

    Beautiful Building! If only it wasn't conflicting with the global rail network...

  • xbb1024 - 28. 3. 2023 16:01:15

    Hi everyone, sorry I've been away from the game for a bit. I'll look into making the fixes in my megaprint

  • jneal - 12. 3. 2023 16:38:42

    I ended up raising this up with the calculator and converting it to use Rail way stations for all the input, makes it easier to bring material in from the map. Right now I have it working with all the rail stations all to the side, but I am working on moving them underneath to look nicer. Fixed a few bugs and adding more signs but this is a awesome build that you did. Once I am finished I can send you a copy if you want. I found out how to resize the pieces and I am converting some it to regular vanilla.

  • jneal - 22. 2. 2023 5:07:31

    what mod is used for the oversized pieces?

  • RipTheJacker - 21. 2. 2023 13:42:32

    @xbb1024 Great work, I really love your factories. However, as pointed out before, there is an error on 9th floor with rubber beeing used instead of circuit boards. It can easily be fixed with a little re-routing. But, there isnt enough circuit boards beeing made to cover it all. Do you have any suggestion or are you working on a fix?

  • dak4482 - 9. 2. 2023 22:07:42

    Found one major error. On the 9th floor you have rubber being input to the adaptive control unit manufacturers instead of circuit boards. Definitely needs to be fixed.

  • dak4482 - 30. 1. 2023 22:12:38

    Alot of lower level stuff goes below ground and cant be connected!!! This blueprint should be raised up AT LEAST 10 meters when placed. Or relocated where the landscape doesnt swallow up the lower level. Needs to be on LEVEL ground!!!!

  • dak4482 - 23. 1. 2023 20:09:36

    I am hopelessly lost with this building. How do you get the products to the drones or out of the building???? NOTHING is labeled. The conveyors fro,m the back of the drones dead end at the inside wall. What do you connect those to??? There are conveyor connections on the walls of the interior shaft but again no labels and no connections that I can see to the production machines. HEEEELLLPPP!!!!

  • Novoca1n3 - 20. 11. 2022 2:29:58

    Looks like a great factory however shame you're using mods.

  • xbb1024 - 8. 11. 2022 13:56:30

    Power inputs to the building are under the path going into the entrance (you will see 3 of them)

  • Ventah - 4. 11. 2022 13:57:52

    I really like this design, but I can't figure out where to connect the power. I powered the train station and hoped this will be enough but apparently somewhere else is a connection required. Can anyone tell me where?

  • xbb1024 - 10. 10. 2022 1:55:11

    I started using resizing as a way to get my blueprints / save file smaller, when I made this one I didn't really consider how hard it would be to alter. I'll keep the floor under machines normal for future blueprints.

  • kammerkoenig - 6. 10. 2022 16:49:23

    Had an issue with one wrong connection with rubber in the computer production (not sure anymore where it was) but still a nice build :D, but yes modification is difficult with the oversized pieces

  • Heathwing22 - 29. 8. 2022 21:22:39

    Beautiful Building.....BUT oversized pieces make it impossible to add anything or change anything. I gave up on it.....