Concrete Plant v1.2




Concrete Plant v1.2
For Satisfactory v1.0
An architecturally inspired 1000/min Concrete Plant, located in the Rocky Desert. Opted to make it a high-end facility. The Concrete Plant production is sub-divided into an 850/min production line which is fed through Industrial Storage Containers to a Train Station (not included) and a 150/min production line which is fed through Industrial Storage Containers to a Drone Port (Drone is included).
- Allow at least 5mins for all resource input Conveyors to be filled, then the Refineries should be fully functioning.
- Overflow Concrete produced via the Train Station feed line is sent to Sinks to keep this production line flowing.
RESOURCES: All Pipes/Pumps are Mk.2 and connected to Water Extractors. The resource Miners are Mk.3 and provide the following resources via Mk.6 Conveyors and Lifts:
- 2400 Limestone (1725 min req) from 2 Pure Nodes.
- 1200 Water (1062.5 min req) from 4 Water Extractors.
- 860 MW Power Required (Calculated).
MODS / ALTERNATE RECIPES:
- No Mods that leave a footprint were used, only Throughput Counter and Power Checker. All Vanilla components, however, the SCIM was used to alter the appearance of the Frame Foundations supporting the Concrete Tanks.
- Awesome Shop items are used.
- Alt Recipe Wet Concrete used in Refineries
- Most machines have been Overclocked
- The SCIM has been used to "cheese" the Water Extractors to be enclosed in this MP.
NOTES:
- Lighting Control and Sub-Section Power Controls have a dedicated room and signage.
- The Main Power Switch is turned OFF. Turn it on once a Power Line is connected to the Power Tower with the signage.
- Two Pipe Wall Holes are located opposite the entrance door. These have been positioned to easily remove the green section of pipes and connect new Mk.2 Pipes to the Red Pipe connections.This can be done if you want to install Water Extractors in the nearby water source and not disable the ones included while you test.
- Some clipping, except for the Balancer (it's all clipped up).
- Thanks to xbb1024 for some of the inspiration.
UPDATE HISTORY:
- v1.1 Missing Power Tower
- v1.2 Changed Swatch colors to Custom colors
Custom Colors I used that I hope transfered: Accent Trim = 0069a7, Pipeline Support Red = bb0000, Pipeline Green = 255d2e
Link to my other Megablueprints: https://satisfactory-calculator.com/en/megaprints/index/index/idU/24878/user/Ogmosis
PLEASE COMMENT BELOW IF THERE ARE ANY ISSUES SO I CAN GET THEM CORRECTED
- Items count 3.656
- Coordinates -241.276 / -114.471
- Only paste on original location Yes
- Categorie Architecture Complete factory Stable (1.0)
- Created on 03/ott/2024 20:08:08
- Last updated on 24/ott/2024 11:26:47
-
Estensione d'angolo esterna 4m 568
-
Fondazione 4m 286
-
Linea elettrica 234
-
Parete semplice 4m 208
-
Ringhiera moderna 160
-
Parete semplice 4m 153
-
Telaio di fondazione 151
-
Parete semplice 1m 127
-
Fondamenta 1m 104
-
Parete semplice 4m 103
-
Tetto 2m 81
-
Rampa 4m 65
-
Trave verniciata 61
-
Griglia a pavimento 59
-
Connettore per travi 42
-
Tetto 1m 41
-
Container di stoccaggio industriale 36
-
Tetto piano 34
-
Parete semplice 1m 32
-
Fondamenta 1m 31
-
Foro da pavimento per trasportatore verticale 30
-
Conduttura Mk.2 29
-
Palo per nastro trasportatore impilabile 28
-
Telaio di pilastro grande 26
-
Finestra del pannello 22
-
Condotta Mk.2 (senza indicatore) 18
-
Supporto da parete per condotte 18
-
Presa a parete Mk.1 18
-
Palo per nastro trasportatore 17
-
Supporto a soffitto per nastro trasportatore 17
-
Unificatore di nastri trasportatori 17
-
Estensione d'angolo esterna 1m 16
-
Separatore di nastri trasportatori 14
-
Trave di supporto 13
-
Parete rampa 1m 13
-
Giunzione per condotte a croce 10
-
Illuminazione a soffitto 9
-
Cartello espositore 9
-
Telaio di pilastro piccolo 7
-
Parete rampa invertita 1m 6
-
Raffineria 6
-
Rampa di passerelle industriali 5
-
Costruttore 5
-
Rampa angolare in salita 4m 4
-
Parete rampa 2m 4
-
Parete rampa 4m 4
-
Parete rampa 2m 4
-
Angolo di passerelle industriali 4
-
Estrattore d\'acqua 4
-
Foro da parete per condutture 4
-
Pompa di conduttura Mk.2 4
-
Mezza fondazione 1m 3
-
Parete con supporti per nastri trasportatori x1 3
-
Parete con porta a lato 3
-
Tabellone piccolo 3
-
Cartello etichetta 2m 3
-
Supporto da parete per trasportatori 3
-
Supporto per condutture 3
-
Interruttore elettrico 3
-
Pilastro di calcestruzzo piccolo 2
-
Connettore per travi doppio 2
-
Parete rampa 8m 2
-
Parete inclinata 4m 2
-
Parete rampa invertita 1m 2
-
Parete rampa invertita 4m 2
-
Parete con supporti per nastri trasportatori x2 2
-
Parete con supporti per nastri trasportatori x3 2
-
Parete con supporti per nastri trasportatori x2 2
-
Cartello quadrato 2m 2
-
Trivella Mk.3 2
-
Cisterna per liquidi 2
-
Separatore intelligente 2
-
Traliccio 2
-
Pannello di controllo delle luci 1
-
Parete semplice 1m 1
-
Parete inclinata 8m 1
-
Parete con supporti per nastri trasportatori x1 1
-
Parete con supporti per nastri trasportatori x3 1
-
Parete con porta centrale 1
-
Parete con porta centrale 1
-
Incrocio a T di passerelle industriali 1
-
Eliporto 1
-
Presa da parete doppia Mk.1 1
-
Palo elettrico Mk.3 1
-
Calcestruzzo 7.576
-
Trave d'acciaio 1.972
-
Tubo di acciaio 1.536
-
Barra di ferro 611
-
Connettore ad alta velocità 556
-
Filorapido 510
-
Lamiera di rame 376
-
Cavo 312
-
Piastra di ferro 279
-
Filo 264
-
Trave di cemento armato 85
-
Piastra di ferro rinforzata 83
-
Plastica 79
-
Cristallo di quarzo 71
-
Motore 68
-
Lamiera d\'alluminio Alclad 50
-
Contenitore di alluminio 50
-
Silice 44
-
Rotore 44
-
Telaio modulare fuso 20
-
Telaio modulare pesante 20
-
Supercomputer 10
-
Telaio modulare 10
-
Unità di controllo radio 10
-
Limitatore di IA 8
-
Trivella portatile 6
-
Motore turbo 6
-
Oscillatore al cristallo 3
-
Gomma 3
-
snakkiolo - 09/mag/2025 05:22:19
there is a problem with the water pumps that i solved in vanilla. the first two mk2 pumps are too high and draw little water behind them, so it doesn't create concrete, if you can update the project add 2 pumps behind immediately at the extractor outlet
-
Ogmosis - 09/ott/2024 02:44:56
@Celti Thank you. I do provide instructions in the description how to provide "real Water Extractor" input without alter the design. Sometimes it's all about the options.
-
Celti - 08/ott/2024 11:17:11
Verry nice build ! it's just sad that water extractors are "cheat" without water underneath
-
Ogmosis - 07/ott/2024 01:55:05
Thanks. I built it without the GRN installed and thought I had correctly accounted for the location of the Station. The incoming and outgoing rail lines need to be rerouted once everything is installed so they don't clip through the buildings. I could push the Concrete Plant two foundations North, but then I would be covering up two Pure Iron nodes.
-
Yez - 06/ott/2024 21:16:31
GRN * 1.0 Compatible - Places itself right next to a station. Great looking facility.