Concrete Plant v1.2




Concrete Plant v1.2
For Satisfactory v1.0
An architecturally inspired 1000/min Concrete Plant, located in the Rocky Desert. Opted to make it a high-end facility. The Concrete Plant production is sub-divided into an 850/min production line which is fed through Industrial Storage Containers to a Train Station (not included) and a 150/min production line which is fed through Industrial Storage Containers to a Drone Port (Drone is included).
- Allow at least 5mins for all resource input Conveyors to be filled, then the Refineries should be fully functioning.
- Overflow Concrete produced via the Train Station feed line is sent to Sinks to keep this production line flowing.
RESOURCES: All Pipes/Pumps are Mk.2 and connected to Water Extractors. The resource Miners are Mk.3 and provide the following resources via Mk.6 Conveyors and Lifts:
- 2400 Limestone (1725 min req) from 2 Pure Nodes.
- 1200 Water (1062.5 min req) from 4 Water Extractors.
- 860 MW Power Required (Calculated).
MODS / ALTERNATE RECIPES:
- No Mods that leave a footprint were used, only Throughput Counter and Power Checker. All Vanilla components, however, the SCIM was used to alter the appearance of the Frame Foundations supporting the Concrete Tanks.
- Awesome Shop items are used.
- Alt Recipe Wet Concrete used in Refineries
- Most machines have been Overclocked
- The SCIM has been used to "cheese" the Water Extractors to be enclosed in this MP.
NOTES:
- Lighting Control and Sub-Section Power Controls have a dedicated room and signage.
- The Main Power Switch is turned OFF. Turn it on once a Power Line is connected to the Power Tower with the signage.
- Two Pipe Wall Holes are located opposite the entrance door. These have been positioned to easily remove the green section of pipes and connect new Mk.2 Pipes to the Red Pipe connections.This can be done if you want to install Water Extractors in the nearby water source and not disable the ones included while you test.
- Some clipping, except for the Balancer (it's all clipped up).
- Thanks to xbb1024 for some of the inspiration.
UPDATE HISTORY:
- v1.1 Missing Power Tower
- v1.2 Changed Swatch colors to Custom colors
Custom Colors I used that I hope transfered: Accent Trim = 0069a7, Pipeline Support Red = bb0000, Pipeline Green = 255d2e
Link to my other Megablueprints: https://satisfactory-calculator.com/en/megaprints/index/index/idU/24878/user/Ogmosis
PLEASE COMMENT BELOW IF THERE ARE ANY ISSUES SO I CAN GET THEM CORRECTED
- Items count 3,656
- Coordinates -241,276 / -114,471
- Only paste on original location Yes
- Categories Architecture Complete factory Stable (1.0)
- Created on Oct 3, 2024, 8:08:08 PM
- Last updated on Oct 24, 2024, 11:26:47 AM
-
Outer Corner Extension 4m 568
-
Foundation 4m 286
-
Power Line 234
-
Basic Wall 4m 208
-
Modern Railing 160
-
Basic Wall 4m 153
-
Frame Foundation 151
-
Basic Wall 1m 127
-
Foundation 1m 104
-
Basic Wall 4m 103
-
Roof 2m 81
-
Ramp 4m 65
-
Painted Beam 61
-
Frame Floor 59
-
Beam Connector 42
-
Roof 1m 41
-
Industrial Storage Container 36
-
Roof Flat 34
-
Basic Wall 1m 32
-
Foundation 1m 31
-
Conveyor Lift Floor Hole 30
-
Pipeline Mk.2 29
-
Stackable Conveyor Pole 28
-
Big Frame Pillar 26
-
Panel Window 22
-
Pipeline Mk.2 (No Indicator) 18
-
Pipeline Wall Support 18
-
Wall Outlet Mk.1 18
-
Conveyor Pole 17
-
Conveyor Ceiling Mount 17
-
Conveyor Merger 17
-
Outer Corner Extension 1m 16
-
Conveyor Splitter 14
-
Beam Support 13
-
Ramp Wall 1m 13
-
Pipeline Junction Cross 10
-
Ceiling Light 9
-
Display Sign 9
-
Small Frame Pillar 7
-
Inv. Ramp Wall 1m 6
-
Refinery 6
-
Catwalk Ramp 5
-
Constructor 5
-
Up Corner Ramp 4m 4
-
Ramp Wall 2m 4
-
Ramp Wall 4m 4
-
Ramp Wall 2m 4
-
Catwalk Corner 4
-
Water Extractor 4
-
Pipeline Wall Hole 4
-
Pipeline Pump Mk.2 4
-
Half 1m Foundation 3
-
Conveyor Wall x1 3
-
Side Door Wall 3
-
Small Billboard 3
-
Label Sign 2m 3
-
Conveyor Wall Mount 3
-
Pipeline Support 3
-
Power Switch 3
-
Small Concrete Pillar 2
-
Beam Connector Double 2
-
Ramp Wall 8m 2
-
Tilted Wall 4m 2
-
Inv. Ramp Wall 1m 2
-
Inv. Ramp Wall 4m 2
-
Conveyor Wall x2 2
-
Conveyor Wall x3 2
-
Conveyor Wall x2 2
-
Square Sign 2m 2
-
Miner Mk.3 2
-
Fluid Buffer 2
-
Smart Splitter 2
-
Power Tower 2
-
Lights Control Panel 1
-
Basic Wall 1m 1
-
Tilted Wall 8m 1
-
Conveyor Wall x1 1
-
Conveyor Wall x3 1
-
Center Door Wall 1
-
Center Door Wall 1
-
Catwalk T-Crossing 1
-
Drone Port 1
-
Double Wall Outlet Mk.1 1
-
Power Pole Mk.3 1
-
Concrete 7,576
-
Steel Beam 1,972
-
Steel Pipe 1,536
-
Iron Rod 611
-
High-Speed Connector 556
-
Quickwire 510
-
Copper Sheet 376
-
Cable 312
-
Iron Plate 279
-
Wire 264
-
Encased Industrial Beam 85
-
Reinforced Iron Plate 83
-
Plastic 79
-
Quartz Crystal 71
-
Motor 68
-
Alclad Aluminum Sheet 50
-
Aluminum Casing 50
-
Silica 44
-
Rotor 44
-
Fused Modular Frame 20
-
Heavy Modular Frame 20
-
Supercomputer 10
-
Modular Frame 10
-
Radio Control Unit 10
-
AI Limiter 8
-
Portable Miner 6
-
Turbo Motor 6
-
Crystal Oscillator 3
-
Rubber 3
-
snakkiolo - May 9, 2025, 5:22:19 AM
there is a problem with the water pumps that i solved in vanilla. the first two mk2 pumps are too high and draw little water behind them, so it doesn't create concrete, if you can update the project add 2 pumps behind immediately at the extractor outlet
-
Ogmosis - Oct 9, 2024, 2:44:56 AM
@Celti Thank you. I do provide instructions in the description how to provide "real Water Extractor" input without alter the design. Sometimes it's all about the options.
-
Celti - Oct 8, 2024, 11:17:11 AM
Verry nice build ! it's just sad that water extractors are "cheat" without water underneath
-
Ogmosis - Oct 7, 2024, 1:55:05 AM
Thanks. I built it without the GRN installed and thought I had correctly accounted for the location of the Station. The incoming and outgoing rail lines need to be rerouted once everything is installed so they don't clip through the buildings. I could push the Concrete Plant two foundations North, but then I would be covering up two Pure Iron nodes.
-
Yez - Oct 6, 2024, 9:16:31 PM
GRN * 1.0 Compatible - Places itself right next to a station. Great looking facility.