This is not an automation-ready facility; it's a mini-HUB outpost that provides Concrete for nearby construction projects.

• 3 Constructors to make Concrete
• 4 Industrial Storage units
• You provide the Miner
• Craft Bench
• Equipment Workshop
• M.A.M
• 4 Personal Storage Boxes
• Lookout Tower
• Hyper Tube network-ready with 3 Hyper Tube Entrances
• Biomass Burner for emergency powering of Hyper Tubes

How To Place:

Before you begin, make sure you've downloaded the blueprint file to your local machine.

• Put an 8x4 spacer foundation near the center of a Limestone node.
• Construct a Miner on the node (and foundation), facing the desired direction.
• Delete the foundation.
• Stand behind the miner and prepare to place another 8x4 foundation.
  • Make sure the foundation's rotation aligns with the Miner's.
  • Attempt to place the foundation so it sticks out from under the Miner equally to both sides, and from behind.
  • This is easiest to estimate by looking at the green arrows in front of the Miner; they should appear to be a straight line.
  • Ideally once placed, you will have room for walls to surround the back half of the Miner. If not, delete and try again.
• Snap an 8x1 foundation under the front half of the Miner.
• Now deconstruct the Miner, the 8x4 foundation, and any walls you constructed.
  • You should only have a single foundation at this point.
• Construct another 8x1 foundation directly under the first one.
  • It's likely to be mostly underground; that's fine.
• Deconstruct the top (first) 8x1 foundation, again leaving only one foundation.
• Move your character aside and save the game, then exit to the main menu.
• Open the save file in the interactive map.
• Click the blueprint's icon (the one under the ruler), then click the big dotted box.
  • A file selection dialog box will appear.
• Find the blueprint file, select and open it, then click OK.
• In the map view, right-click the foundation you placed.
  • A menu will appear.
• From the menu, select: Spawn around "Foundation 8m x 1m"
  • A dialog box will appear.
• Select No from the dialog's bottom dropdown, then click OK.
  • Another dialog box will appear.
• Don't change anything; click OK.
  • The blueprint will be added on the interactive map facing the correct direction.
• Download the modified save game file; make sure it's in the same folder as the original save game file.
• Load the new save game file.
• Go to the back of the building, and construct a Miner inside, rotating as needed.
• Connect the Miner and the Splitter in the front of the building with a conveyor.
• Connect the Miner to the Double Wall Outlet above it with Cable.
• Go back outside and seal up the building's back with a wall.
• Connect the outside half of the Double Wall Outlet to your grid.

You should be good to go!