Oil Rig v1.0

For Satisfactory v1.0

An architecturally inspired 1800/min Rubber and 450/min Plastic Plant, located in the Ocean just West of the Islands Biome. The Oil Rig production output is sub-divided into four 450/min Rubber production lines and one 450/min Plastic production line, each only requiring 150/min Crude Oil supplied from an Oil Well Pressurizer within the large Oil Storage Tank.

Rubber and Plastic can be transported off the Oil Rig via Train or Drone. Each Production Line feeds it's own dedicated Drone. The Train Station has three Freight Platforms, the first one holds Plastic only, with the second and third holding Rubber. The sixth Drone Port will retrieve Drone Fuel (whatever you assign it to collect) and it's Port will distribute the Fuel to all Drone Ports on the Oil Rig via Conveyors.

• This MP come fully stocked (Pipelines, Storage, Train and Drone Freight Storage), with the exception of Drone Fuel. Only the Drone Fuel Port has Batteries.
• Allow at least 5mins once all power has been applied, for the Production Line outputs to be up to speed.
• Each Production line has it's own dedicated Sink for Overflow to keep the Production flowing. These are located in the Control Room.

RESOURCES:

• All Pipes/Pumps are Mk.2 and connected to Water Extractors. The Production lines use a a mix of Mk.1/Mk.4 Conveyors and Lifts:
  • 750 Crude Oil (150 per Production Line req).
  • 2500 Water (499.9999 per Production Line req).
  • 8600 MW Power Required (Calculated).

MODS / ALTERNATE RECIPES:

• No Mods that leave a footprint were used, only Throughput Counter and Power Checker. All Vanilla components.
• Awesome Shop items are used.
• Alt Recipes Used:
  • Heavy Oil Residue
  • Diluted Fuel
  • Recycled Rubber
  • Recycled Plastic
  • Not Alternate Recipe - Residual Rubber
• All machines have been Overclocked to very specific percentages.
• The SCIM has been used to "cheese" 12 Water Extractors into this MP (all are powered and overclocked, but only 10 are in use. I may expand the Plastic production in a version update).

NOTES:

• Lighting Control and Sub-Section Power Controls have a dedicated room and signage.
  • Power can be shutoff to individual Production Lines and their associated Drone without affecting any other Production Line.
• The Main Power Switch is located next to the Power Tower by the Oil Rig and is turned OFF. Turn it on once a Power Line is connected to the Power Tower closest to the Small Oil Storage Tank.
• Some clipping, except for the Balancer (it's all clipped up).
• You must run your own Rails to the Train Station, or you can remove it without disrupting any of the Production Lines.
• Most everything on the top deck of the Oil Rig and ALL Fluid Buffers are being used for props only and have no functionality to the Production Lines.
• The Small Oil Storage Tank houses a Pure Crude Oil node NOT currently in use.

Custom Colors I used that I hope transfered: Plastic Production Water Pipe = #00b9fb, Building Main = #fbf6e3, Building Trim = #5f668c, Water Pipe = #1663ad, Crude Oil Pipe = #0a090f, Heavy Oil Residue Pipe = #ae1cd7, Diluted Fuel Pipe = #d47615

Link to my Megablueprints: https://satisfactory-calculator.com/en/megaprints/index/index/idU/24878/user/Ogmosis

LInk to my Blueprints: https://satisfactory-calculator.com/en/blueprints/index/index/idU/24878/user/Ogmosis

PLEASE COMMENT BELOW IF THERE ARE ANY ISSUES SO I CAN GET THEM CORRECTED