Updated! Massive Storage x86 (10 Belts Input and Output)
A massive central storage with 86 containers, sorting system, overflow, and 10 belts Input and Output (each). The design is inspired by a central storage by KalunoGaming (Shout out to him/her). The storage has a diameter of 23 platforms so the 12th would be the middle one. Put Z Offset to -900 to get the entrances on the height of your platform. Proposal for improvements and opinions are welcome. Especially about the output system ... I'm not 100% happy with that. On the top floor you could make an entrance for explorers and tractors on the left and the right side so you can access it by car.
UPDATE!
- asphalt foundations
- fixed spelling
- added smart splitter on the outside
- added update 6 items
- added light switch
- Items count 10,528
- Coordinates -53,697 / 238,276
- Only paste on original location No
- หมวด Architecture UPDATE 6
- Created on 23 ก.ค. 2022 11:08:37
- Last updated on 12 ธ.ค. 2022 17:56:39
- สายพานลำเลียง รุ่นที่ 5 3,510
- เครื่องรวมสายพาน 1,301
- เครื่องคัดแยกอัจฉริยะ 856
- กำแพงพื้นฐาน 4 เมตร 717
- พื้น 2 เมตร 555
- พื้น 1 เมตร 498
- ลิฟต์ลำเลียง รุ่นที่ 5 490
- ตู้คอนเทนเนอร์เก็บของ 432
- พื้นลาดสองฝั่ง 2 ม. 288
- สายไฟ 245
- ป้ายสี่เหลี่ยม 2 เมตร 155
- ขั้วต่อสายไฟรุ่นที่ 1 149
- หน้าต่างเต็มโครง 144
- กำแพงมีช่องลำเลียง 1 ช่อง 136
- โครงเสาขนาดเล็ก 79
- เสาคอนกรีตขนาดเล็ก 76
- พื้นลาดสองฝั่ง 2 ม. 72
- หน้าต่างบานใหญ่ 72
- เสารับสายพาน 72
- บันไดลำเลียงแบบวางซ้อนกันได้ 71
- ฐานรองสายพานแบบติดผนัง 70
- สายพานลำเลียง รุ่นที่ 2 68
- พื้นกรอบโครงกระจก 60
- ทางรถไฟ 54
- ทางลาดมุมขึ้นกลับด้าน 4 ม. 36
- ไฟติดผนัง 36
- เสาไฟฟ้า รุ่นที่ 1 33
- เครื่องคัดแยกแบบตั้งโปรแกรม 29
- รองรับเสาขนาดใหญ่ 24
- เสาเหล็กขนาดใหญ่ 24
- ราวรั้วทันสมัย 21
- ทางลาดกลับด้าน 4 ม. 18
- ป้ายโฆษณาขนาดเล็ก 13
- ไฟทาง 12
- ทางเดินลาด 12
- พื้น 2 เมตร 11
- เสาเหล็กขนาดเล็ก 9
- ระบบอุโมงค์เดินทาง 9
- ทางเดินเลี้ยว 8
- ทางลาดเอียง 2 เมตร 6
- บันไดทางเดิน 6
- ทางเดิน 4 แยก 5
- แท่นเชื่อมต่ออุโมงค์ 5
- ทางเดินแบบ 3 ทาง 4
- ทางเดินตรง 4
- ป้ายชื่อ 2 เมตร 4
- ทางเข้าอุโมงค์ 4
- กำแพงช่องประตู 3
- รูพื้นยกสายพานลำเลียง 2
- ช่องอุโมงค์ทะลุพื้น 2
- แท่นควบคุมแสงไฟ 1
- กำแพงพื้นฐาน 1 เมตร 1
- ป้ายโฆษณา 1
- ห้องประดิษฐ์ 1
- ร้านค้า AWESOME 1
- โต๊ะปฏิบัติงาน 1
- เครื่องวิเคราะห์โมเลกุล 1
- ตู้คอนเทนเนอร์เก็บของระดับโรงงาน 1
- กล่องเก็บของส่วนตัว 1
- คอนกรีต 10,277
- เหล็กเส้น 7,669
- เหล็กแผ่น 7,423
- แผ่นอลูมิเนียมอัลแคลด 4,490
- แผ่นเหล็กเสริมแรง 2,257
- โรเตอร์ 1,728
- คริสตอลควอตซ์ 1,563
- เส้นลวดคุณภาพสูง 1,108
- แกน AI 859
- ขดลวด 788
- คานเหล็กกล้า 719
- ซิลิกา 432
- สายเคเบิล 280
- แผ่นทองแดง 205
- สกรู 200
- คานเหล็กหล่อคอนกรีต 127
- ท่อเหล็กกล้า 123
- โครงประกอบขนาดใหญ่ 29
- มอเตอร์ 29
- ซูเปอร์คอมพิวเตอร์ 29
- คริสตัลออสซิลเลเตอร์ 13
-
Rhano - 7 มี.ค. 2024 12:35:59
They go straight to the output belts. On the lower level in the middle, there is container and a splitter infront. you can sort anything into the container, you dont want to go to the output.
-
GI66 - 10 ก.พ. 2024 20:35:40
Very nice storage solution. Where do the mined product like iron or copper ingot go?
-
APLear - 30 พ.ย. 2023 23:23:04
Ok, just had a good chat with the author of this BP and found out that it is working as intended. He was very helpful and I really enjoy this BP.
-
APLear - 30 พ.ย. 2023 21:52:00
Really want to like th BP but apparently the one im downloading is not the v.06 as all items fillup one container then dump to output. Any chance i can get the updated version?
-
Rhano - 11 มิ.ย. 2023 12:15:23
@DKHSniper As i already said in an earlier commen ... "each item has 6 containers. 1 on the upper floor witch is for "personal" storage. the 5 containers on the lower floor only function as buffer. Since there are 10 belts imput and only 1 belt to the upper floor, i didn't wanted the sorting system to be lagging when sorting high amounts of one item. this means 2 imput belts are connected to 1 buffer container. I recommend to build a system to mix all 10 input belts before connecting them to the sorting system to get the best possible throughput. Belts 1 and 2 are connected to the same buffer storage, Belt 3 and 4 are connected to the same buffer storage and so forth. So these pairs should never be fully filled with the same items, otherwise the system will start lagging." If you still have problems, you can hit me up on discord and we can try to fix your problem. Discord: .rhano
-
DKHSNIPER - 5 มี.ค. 2023 02:28:24
and where do you bring your items in from your factorys
-
DKHSNIPER - 5 มี.ค. 2023 02:26:55
and i dont understand why the main are items are carried by the smart splitter that is set to the overflow
-
DKHSNIPER - 5 มี.ค. 2023 01:58:26
my containers seem to not work the one in the main area works then the top one in the stacked row then the others just seem to not fill up with the rest of my items and head to the output
-
k1ller - 25 ม.ค. 2023 00:20:20
the audio sounds like its lagging but nothing else is
-
k1ller - 25 ม.ค. 2023 00:14:33
i like the build but it sounds like thousands of bugs flying in my ear am I doing something wrong
-
Rusty_Scar - 14 ธ.ค. 2022 15:44:19
@Rhano Yes Mate, it works Perfectly fine, Thank you very much for this nice Storage, keep up such nice BP :)
-
Rhano - 12 ธ.ค. 2022 17:59:35
@Rusty_Scar Thank you for your response. You did nothing wrong there. I forgot to setup the overflow settings on the outer splitters. Should be fixed by now.
-
Rusty_Scar - 11 ธ.ค. 2022 15:21:47
Hey, nice Storage well done but i got a Problem, when i do all my stuff in the Input lane the Items wont go to the top circle like where it should belong, i just goes to the outside splitters.
Can someone help me maybe i did something wrong here :)
-
Rhano - 26 พ.ย. 2022 02:46:05
Ignore my last comment. It was absolutley nonesense ;)
-
Rhano - 26 พ.ย. 2022 02:32:38
The new file name should have a v0.6 at the end. The file has to be aproved by the admin so it might thake a few hours until you have the updated file. Full filename (updated): Massive Storage x76 (10 Belts Input and Output) v0.6.cbp
-
Rhano - 26 พ.ย. 2022 02:28:24
Thanks for your suggestions guys. I finally updated the blueprint. @ Morgoth ... the output concept was pretty simple ... all items go to the upper floor until the containers are full. The Overflow will then go on one of the 10 output belts. the output belts are mainly for the awesome sink so the sorting system is never blocked. You could aswell send the output to a recycling factory if you have one. Now I added smart splitter on the outside just before the lift to the upper floor you can get your sorted items there from now on. @ Novoca ... each item has 6 containers. 1 on the upper floor witch is for "personal" storage. the 5 containers on the lower floor only function as buffer. Since there are 10 belts imput and only 1 belt to the upper floor, i didn't wanted the sorting system to be lagging when sorting high amounts of one item. this means 2 imput belts are connected to 1 buffer container. I recommend to build a system to mix all 10 input belts before connecting them to the sorting system to get the best possible throughput. Belts 1 and 2 are connected to the same buffer storage, Belt 3 and 4 are connected to the same buffer storage and so forth. So these pairs should never be fully filled with the same items, otherwise the system will start lagging.
-
Novoca1n3 - 23 พ.ย. 2022 06:27:06
There seems to be a bit of a problem with the logic behind overflow. Each item has 6 storage containers however only one every gets full (the very last one on the top level). The other 5 just empty straight out as the overflow logic is placed after their outputs. Items back up at the input of the last container when it's full however they will never back up to fill the other 5 containers as the smart splitter redirects overflow items onto a belt. Smart splitter needs to be before the 5 other containers
-
Novoca1n3 - 21 พ.ย. 2022 03:31:36
Please ignore my previous post as I've fixed all the issues myself
-
Novoca1n3 - 20 พ.ย. 2022 21:08:03
Would like to use this however not with the current issues listed below. Have you fixed those yet?
-
Morgoth - 19 พ.ย. 2022 17:26:23
Hi, I do not understand the output concept. The inputs are staright forward: anything goes in on any of the 10 belts and gets sorted into 76 categories. Thats great ! But how do I get specific items out on any of the 10 output belts ? Do I have to program this somewherre ? What is it that currently is supposed to come out ? I did a test run and fed some stuff in, it gets sorted nicely, but nothing comes out on any of the output belts.
-
Rhano - 27 ก.ย. 2022 21:04:46
thanks m8 for your suggestions.. i'm gonna fix these issues during the following week. good idea to use asphalt as material ... didn't even thought that far but it never really bothered me that much to be honest. I'm gonna include some update 6 stuff aswell
-
StopDropNRofl - 11 ส.ค. 2022 05:39:47
Updated comment with everything I've found.
Needed improvements: -Crystal Oscillator Icon above storage container on sign to the right of it. -Sign to the right of container with Crystal Oscillator is unused and should be blank. -Solid Biofuel icon set incorrectly above storage unit, currently set to Iron Plates. -Spelling issues on sign labels. Standard spelled as "standart." "Refined Ressources" should be corrected to Resources. -Two portable miners actively mining limestone outside of the unit. Clearly should be excluded.
Recommended Improvements: -Change material to Asphalt for most flat floor pieces. There is a TON of visual flashing and flickering that happens when using Grip Metal (steel) as the foundation material. Asphalt hides this quite well. Issue doesn't apply to roof pieces as it only effects pieces that share a plane. The angled pieces rotate around and therefore get around the issue.
-
StopDropNRofl - 10 ส.ค. 2022 16:17:23
Just a few suggestions for improvements that I've noticed. There are multiple spelling errors on several signs. Also there are 2 portable miners outside that were accidentally included.