Power Tower 3L with switchboard on the side.
Features labels for ease of connection.
Note: Switchboard is placed on right side and intended to be used as a "tap" on long transmission lines. You can of course rotate the tower 180 degrees to get switchboard on left if needed (but mind this changes the location of ladders). Left-side switchboard is not provided, sorry!

---

3-Phase Power Grid Set.

• Three phases (three separate circuits) per tower
• Features versions with/without labels, ladders and switchboards.
• Switchboards already wired to respective tower sections (check the labels)
• Label colors according to EU standard (Brown/Black/Gray)
• Amperage capacity: Unrated/Infinite
• Uses default factory swatch
• All towers can be swapped between ladder/no-ladder versions after building (simply sample the power tower and press e to switch to other version, then upgrade in place the bottom and top tower)
• Features build point for hypertube on top. Please remember hypertubes have smaller distance limit than towers - plan your spacing accordingly.
• Use with transformers for realistic HV/LV power grid.
• Note: Requires 6x6x6 Blueprinter to load and edit

Check other uploads for more tower variants and transformers.