Coal Power Station 10 800 MW/h by Chaaa-Y Gaming

Coal plant in vanilla without mods. 144 charcoal generators for a total of 10,800MW / h. Of course the dam where I placed 25 batteries is used to rescue the pumping + drilling in case of problems. Thanks to centralized management (circuit breaker room). A video is on my channel for the visit if you wish to discover the installation in detail.

Vidéo: https://youtu.be/zPUk3Lln8dk

Centrale charbon en vanilla sans mods. 144 générateurs charbons pour un total de 10 800MW/h. Bien sur le barrage ou j'ai placé 25 batteries sert a secourire le pompage + forage en cas de soucis. Le grâce à une gestion centralisé ( salle de disjoncteurs ). Une vidéo est sur ma chaine pour la visite si vous souhaitez découvrir l'installation en détail.
  • Количество предметов 11 370
  • Координаты -87 890 / -47 516
  • Можно ставить только на изначальном месте No
  • Категории Complete factory UPDATE 4
  • Created on 21 июня 2021 г., 18:39:31
  • NeoMod - 23 апр. 2024 г., 16:35:30

    P.S. yes, you most certainly "abused" the lighting system. But the overall effect justifies the monstrous consumption 😜

  • NeoMod - 23 апр. 2024 г., 16:34:11

    // TL;DL; The power connection is on the top side of the external wall of the "power control room" which is situated in the round basement of one of the main beams near the central hub. You'll spot it easily because it's the only one with a ramp on the front. // Very nice work, thanks for sharing. Probably you should make a short video explaining where is the main grid connection to power the whole structure: I had to go trough your video in french (altough you made some nice jokes, it was "still french" for me...🤣) to understand how you designed the wiring. Update 8 has changed some of the landscape, so there are a few adjustments to be made: the wall on the inside of the "hydroelectric dam" is now partially clipped by some water and the waterfall is now larger; the "central round hub" and some conveyors are now clipped by forest, with some tree that needs force removal.

  • Sineus - 13 апр. 2023 г., 1:54:03

    Where to connect the electricity, the main switch has not been found. I wanted to look for answers on the author's video channel, but everything is deleted there, and some kind of French moron rejoices.

  • H0n_Za- - 7 дек. 2022 г., 16:43:30

    nice build. is there any intended powerpole to conect my existing grid to. so all switches work nicely? (I have connected those two powercords above the switches)

  • brn0 - 26 окт. 2022 г., 16:07:41

    If you remove the ceilling right above the reserve switch you will find 4 plugs (1 top + 3 botton) remove also the ceilling above secondary baterie switch you will see a MK3 power oulet(its the only one there) connect the middle plug (from the botton line) to this mk3 and it will work :)

  • UcantCcanU - 12 июля 2022 г., 20:12:59

    There was 1 connection that needed to be made over the battery switch that was missing. Once that is connected it starts right up with the battery backup

  • JackShnaps - 17 мая 2022 г., 7:59:58

    Try powering from an external power source, such as a biomass burner

  • Dazio99 - 11 апр. 2022 г., 9:07:09

    Very impressive, great design and planning, kudos!

  • danbuck84 - 27 февр. 2022 г., 0:28:44

    Amazing! But how do I turn this on?

  • BlazerBuddy - 10 февр. 2022 г., 1:06:33

    Does this still work in Update 5?

  • shilei97.1 - 9 февр. 2022 г., 19:36:06

    How to use/turn on this power station? I can't figure it out...