Elevated Rail Unloading Station

Designed for a dual rail system, based off the Rail Stations included in the Megaprint Global Rail Network 4.0 by Pravum L.

https://satisfactory-calculator.com/en/megaprints/index/details/id/1260/name/Global+Rail+Network+4.0+for+Satisfactory+v1.0

I wanted to have an add on Unloading Rail Station to place where I wanted, and tie them into existing rail networks. I also wanted mass storage located at the rail station so a larger buffer was available for the individual freight stations. This rail station has a lower platform with multiple Industrial Storage Containers that take products delivered to the rail station and send them down for distribution. There are 4 freight platforms in this station, so a train with an engine and 4 freight cars is the appropriate size. Each of the 4 freight platforms has 8 dedicated Industrial Storage Containers (4 on each side) to send products to. The storage is split with outputs on both sides, half the products go to each side. If you desire only one side output, route the outputs on the opposite side under the platform to the desired side and all products will be delivered there. There are 3 power outlets at each end of the Station, to feed into the existing power distribution included in the Global Rail Network. The station is connected to the center power outlets.

Installation

Place blueprint

Connect lower rail ends to an existing dual rail network or start you own.

Connect power if needed.

Feed the Conveyor outputs as desired.