also, one of the conveyor belts from one of the concrete miners, has a mark 4 piece bottlenecking the mark 5 belts. you'll be able to tell fairly quickly visually, because of the reduced input rate.

also, one of the conveyor belts from one of the concrete miners, has a mark 4 piece bottlenecking the mark 5 belts. you'll be able to tell fairly quickly visually, because of the reduced input rate.

nice setup, but needs a decent amount of optimization. firstly, theres a large amount of refineries which require 120 per minute input of limestone. these are fed in the blueprint by mark 1 conveyor belts, which supply at a rate of 60 per minute. futhermore, the conveyor belts supplying this conveyor line are bottlenecked by a mark 4 conveyor piece, which limits the supply rate. also, each conveyor line supplies 8 refineries, each needing 120 limestone per minute. this is a total of 960 per minute needed which is beyond the capacity of a mk5 belt. also, one of the mines is totally useless since the conveyor belt from it stops inexplicably just inside the building. ideally, this limestone should be fed to the refineries which dont have enough, due to the setup. probably a few hours work to get this blueprint actually functioning the way it should . strange that the creator wouldnt have tested these quite obvious problems.