300/min Self-Sufficient Battery Factory-v1.0
300/min Battery Factory v1.0
A self-sufficient 300 per minute Battery Factory requiring no user resource input other than electrical power. It is located on the Western side of Swamp with resource miners in the Eastern Dune Forest, Dune Desert and Swamp. Batteries are delivered via six Drone Ports located on top of the roof.
Allow at least 20mins for all resources to be delivered and Blenders are up to speed for 300/min output.
All Pipes are Mk2, and the resource Miners are Mk3 and provide the following resources via Mk5 Belts and Lifts:
- 1000 Bauxite
- 780 Sulfur
- 300 Coal
- 900 Limestone
- 1900 Water is provided by Water Extractors behind Factory to all Refineries that need it.
The Wastewater from the Scrap Aluminum Refineries and Blenders is turned into Cement and put through a Sink. Overflow Batteries are Sunk also, to keep production flowing.
ALTERNATE RECIPES: Multiple machines are Overclocked, and the following Alternate Recipes are used:
- Sloppy Alumina
- Pure Aluminum Ingot
- Wet Concrete
MODS USED: The following Mods are used in the build and may be required for functionality, appearance and changes to the Megaprint:
- Structural Solutions (nearly the entire building structure is built using this - All machines, belts, lifts, etc. are Vanilla)
- Pimp My Factory (only for the half-width Modern Railing)
- Micro Manager (used for the placement of many items)
- Multiple items from the Ficsit Awesome Shop are also used.
This MegaPrint is compatible with the Global Rail Network by Pravum L, both v2.9 and v3.x. (It does not require the GRN for any resources)
Link to GRN: https://satisfactory-calculator.com/en/megaprints/index/details/id/1260/name/Global+Railway+Network+3.4
Thank you to @Katoo for the excellent and informative testing assistance.
Link to my other Megaprints: https://satisfactory-calculator.com/en/megaprints/index/index/idU/24878/user/Ogmosis
PLEASE COMMENT BELOW IF THERE ARE ANY ISSUES SO I CAN GET THEM CORRECTED
- 아이템 수 8,005
- 좌표 274,570 / -4,037
- 기본 위치에만 붙여넣기 Yes
- 분류 Architecture Complete factory Modded UPDATE 7
- 생성일: 2023. 3. 20. 오후 9:05:14
- 마지막 업데이트: 2023. 3. 20. 오후 9:15:42
- 토대 1m 783
- 송전선 601
- 컨베이어 벨트 Mk.5 543
- 적층형 컨베이어 기둥 418
- 프레임 토대 266
- 파이프라인 Mk.2 (유량기 없음) 237
- 기본 벽 4m 224
- 프레임 창문 220
- 컨베이어 리프트 Mk.5 211
- 컨베이어 기둥 187
- 토대 4m 124
- 파이프라인 Mk.2 119
- 적층형 파이프라인 지지대 104
- 금속 빔 95
- 지붕 2m 92
- 천장등 92
- 파이프라인 접합부 79
- 현대식 난간 72
- 파이프라인 지지대 64
- 보강된 창문 63
- 전신주 Mk.3 57
- 토대 1m 52
- 빔 연결부 52
- 가로등 47
- 절반 토대 1m 46
- 캣워크 T형 교차로 38
- 컨베이어 분배기 35
- 꽉찬 프레임 창문 33
- 컨베이어 병합기 29
- 토대 1m 28
- 기본 벽 1m 28
- 정제소 26
- 토대 1m 24
- 역방향 프레임 경사로 21
- 캣워크 계단 18
- 단일 창문 16
- 캣워크 모퉁이 16
- 라벨 전광판 2m 16
- 제련기 15
- 혼합기 15
- 컨베이어 벽 x2 12
- 캣워크 경사로 9
- 산업용 저장 컨테이너 9
- 컨베이어 리프트 바닥 구멍 9
- 수평 지붕 8
- 벽 부착형 투광 조명 8
- 컨베이어 벽 x1 8
- 야외 전광판 8
- 채굴기 Mk.3 8
- 파이프라인 벽 구멍 8
- 물 추출기 7
- 드론 포트 6
- 제작기 5
- 역방향 경사로 4m 4
- 소형 프레임 기둥 4
- 파이프라인 바닥 구멍 4
- 도색된 빔 3
- 중앙 문 벽 3
- 안내판 3
- 산업용 유체 완충기 3
- 파이프라인 펌프 Mk.2 3
- 캣워크 교차로 2
- A.W.E.S.O.M.E. 싱크 2
- 유체 완충기 2
- 컨베이어 벽 지지대 2
- 토대 4m 1
- 경사로 4m 1
- 역방향 하단 모퉁이 4m 1
- 절반 토대 1m 1
- 지붕 2m 1
- 지붕 4m 1
- 조명 제어판 1
- 측면 문 벽 1
- 게이트 벽 1
- 경사로 벽 2m 1
- 자동화 게이트 1
- 사다리 1
- 선별 분배기 1
- 밸브 1
- 벽 부착형 전신주 Mk.1 1
- 콘크리트 7,786
- 고속 전선 5,270
- 강철 빔 2,445
- 강철 파이프 2,419
- 철봉 1,911
- 철판 1,854
- 구리판 1,819
- 전선 1,784
- 알클래드 알루미늄 판 1,265
- 고속 커넥터 1,179
- 알루미늄 케이스 1,050
- 케이블 781
- 이산화규소 664
- 모터 566
- 플라스틱 470
- 포장된 산업용 빔 288
- 고중량 모듈식 골조 279
- 고무 175
- 보강된 철판 145
- 무선 제어 장치 135
- 석영 수정 102
- 융합된 모듈식 골조 80
- 회전자 72
- 슈퍼컴퓨터 40
- 휴대용 채굴기 24
- 터보 모터 24
- 모듈식 골조 10
- 인공지능 진폭 제한 회로 4
-
MajikTom - 2024. 3. 23. 오전 3:09:28
Ran into a few problems around the pipe junction cross issue. Had to delete and rebuild some lines on the 2nd floor. But also notice a couple other things that could be improved. I am splitting up power with switches so you can get the Sulfuric Acid to fill up because it never fills the storage tanks. Also, the Alumina production for the blenders is overkill, but I don't understand why; the required Alumina Solution for 15 blenders is 40*15=600, which is what those two refineries are set at, but they never run at 100% efficiency. it's like they are only producing at 32% and it's sufficient to supply all the blenders. Very strange.
-
Ogmosis - 2024. 3. 1. 오후 5:58:50
@legendarysmoke52 Just curious if you have the Structural Solutions MOD installed?
-
legendarysmoke52 - 2024. 2. 16. 오전 4:42:19
works awesome but the walls and floors are gone. i have loaded this into 2 worlds with everything unlocked and same issue but i dont have to look at it much so i dont really care but just thought id say something.
-
Ogmosis - 2024. 1. 19. 오후 8:36:10
@Nero_Darkhood If I remember correctly, the batteries pass through storage containers as they fill the Drone Ports. Once those are full, the storage containers fill to capacity and then overflow is directed downstairs to the Awesome Shredders. Been some time since I have logged in, I am waiting for a more stable version of U8.
-
Nero_Darkhood - 2024. 1. 11. 오전 11:57:37
Great build. love it! where is it storimg the batteries tho, everthing is tucked away behind walls. which i love, but i cannot find the storage. i do see it felling the fuel slot for the drones but thats it. is this fcatory build only to sustane the drones? no extra output?
-
Zegyi - 2023. 8. 14. 오후 8:29:14
Love the design! For some reason though the batteries that go into the output disappear?
-
Ogmosis - 2023. 4. 12. 오후 4:34:46
@Sineus - Nearly the entire factory structure and all the conveyor frames from the miners to the factory are build with Structural Solutions mod. The Pimp My Factory mod is only for the half-size modern railing around the Drone Ports. The Ficsit Shop items can be purchased using the tickets from the Sinks. Micro-Manage Mod was used to make micro-changes to the placement/alignment of some items. If you don't move something then you won't need Micro-Manage Mod.
-
Sineus - 2023. 4. 12. 오전 7:40:26
can you build without mods, or is it mandatory to install mods?
-
Ogmosis - 2023. 3. 26. 오후 9:57:25
@Katoo Thank you, inspiration came from a building in North Carolina. Thanks also for the troubleshooting.
-
Katoo - 2023. 3. 26. 오후 7:35:58
I really like this amazing design.