Radio/Computer Factory Tower (Update 8)
Multi-product factory tower in the east swamplands (update 8 map). New design has 9 production floors, each divided into 2 wings and vertical freight shafts. 8 drone ports connected to the freight shafts on the upper floors. Storage containers for finished goods are between floors. Raw input from the lower ground level (labeled). Central shaft contains hypertubes, stairwell and power distribution for the building. Power switches in a room under the central shaft.
If you wish to use this tower in a different location, everything from the ground floor up can be reused. The lower ground level (where freight comes in) is specific to the location topography.
Production:
Circuit Tower (northwest of main tower):
- Caterium Circuit Board Assemblers x 24
- Fused Quickwire Assemblers x 12
9th Floor:
- Adaptive Control Unit Manufacturers x 8
- Assembly Director System Assemblers x 6
- Electromagnetic Connection Rod Assemblers x 6
8th Floor:
- Caterium Computer Manufacturers x 10
- Super-State Computer Manufacturers x 4
7th Floor:
- Radio Control Unit Manufacturers x 12
- Crystal Beacon Manufacturers x 4
6th Floor:
- Silicon Circuit Board Assemblers x 14
- Silicon High Speed Connector Manufacturers x 8
5th Floor:
- Fused Wire Assemblers x 14
- Automated Speed Wiring Manufacturers x 8
4th Floor:
- Fused Quickwire Assemblers x 28
3rd Floor:
- Heavy Encased Frame Manufacturers x 3
- Alclad Casing Assemblers x 5 (only 3 turned on, not enough copper in the swampland)
- Bolted Frame Assemblers x 6
- Encased Industrial Pipe Assemblers x 8
2nd Floor:
- Stator Assemblers x 10
- Steel Rotor Assemblers x 2
- Cast Screw Constructors x 27
- Steel Pipe Constructors x 25
- Steel Beam Constructor
1st Floor:
- Copper Sheet Constructors x 52
- Reinforced Iron Plate Assemblers x 9
- Smart Plating Assemblers x 5
Upper Ground:
- Iron Plate Constructors x 14
- Iron Wire Constructors x 21 (plenty of iron but not enough copper in swampland)
Logistics:
Minimum requirements:
Entry point for most of the raw materials is on the lower ground level, labeled with signs. Via truck, additional Caterium Ingots, Rubber, Batteries and Quartz Oscillators.
Please see my other blueprints https://satisfactory-calculator.com/megaprints/index/details/id/1349/name/Swampland+Infrastructure%2FResources+%28Update+6%29 for metals and https://satisfactory-calculator.com/megaprints/index/details/id/1273/name/Quartz+Hill+Factory for silica.
Modded Content:
Please note that I use oversized pieces in this blueprint.
Version History
- V2.0 Now fixed for update 4.
- V3.0 Fixed for update 6 map.
- V3.1 Replaced floors under manufacturers / assemblers with normal sized pieces. Removed AI limiters from production to allow for more radio control units. Minor conveyor balancing improvements.
- V3.2 Fixed conveyor lift to adaptive control units, thanks to comment feedback below.
- V4.0 Moved circuit tower into the swamp, now part of this blueprint.
- 아이템 수 11,520
- 좌표 233,717 / 32,073
- 기본 위치에만 붙여넣기 Yes
- 분류 Architecture Complete factory Interior decorations Exterior decorations Modded UPDATE 7 UPDATE 8
- 생성일: 2020. 11. 26. 오전 7:05:58
- 마지막 업데이트: 2023. 7. 26. 오전 3:45:10
- 프레임 창문 1,269
- 토대 1m 983
- 패널 창문 983
- 송전선 921
- 컨베이어 리프트 Mk.2 554
- 컨베이어 벨트 Mk.2 425
- 컨베이어 분배기 401
- 컨베이어 벨트 마크 3 395
- 컨베이어 벨트 Mk.1 391
- 컨베이어 벨트 Mk.5 384
- 경사진 벽 8m 372
- 토대 1m 366
- 기본 벽 4m 266
- 컨베이어 병합기 238
- 유리 프레임 토대 216
- 컨베이어 기둥 215
- 벽 부착형 전신주 Mk.1 194
- 천장등 181
- 컨베이어 리프트 Mk.5 157
- 프레임 바닥 154
- 조립기 149
- 제작기 140
- 컨베이어 리프트 Mk.3 131
- 컨베이어 리프트 Mk.1 129
- 단일 창문 105
- 공장 난간 105
- 소형 콘크리트 기둥 94
- 사각 전광판 0.5m 93
- 컨베이어 리프트 바닥 구멍 93
- 캣워크 계단 89
- 경사진 벽 4m 84
- 패널 창문 66
- 컨베이어 벨트 Mk.4 64
- 제조기 59
- 가로등 55
- 적층형 컨베이어 기둥 50
- 역방향 오르막 모퉁이 1m 41
- 수평 지붕 39
- 대형 콘크리트 기둥 34
- 토대 4m 32
- 측면 문 벽 31
- 전력 차단기 31
- 오르막 모퉁이 경사로 1m 30
- 사각 전광판 1m 29
- 기본 벽 1m 28
- 캣워크 T형 교차로 28
- 하이퍼튜브 28
- 캣워크 교차로 23
- 산업용 저장 컨테이너 22
- 컨베이어 벽 x3 20
- 하이퍼튜브 입구 20
- 토대 1m 19
- 역방향 경사로 벽 8m 19
- 꽉찬 프레임 창문 19
- 중앙 문 벽 18
- 기본 벽 4m 18
- 하이퍼튜브 바닥 구멍 18
- 역방향 경사로 벽 4m 16
- FICMAS 눈 발사기 16
- 캣워크 모퉁이 15
- 프레임 벽 14
- 캣워크 직선 13
- 하이퍼튜브 지지대 12
- 역방향 경사로 1m 11
- 절반 토대 1m 11
- 경사진 모퉁이 벽 4m 11
- 라벨 전광판 2m 11
- 컨베이어 리프트 Mk.4 11
- 컨베이어 벽 x2 10
- 경사로 1m 9
- 수평 지붕 9
- 라벨 전광판 3m 9
- 드론 포트 9
- 컨베이어 벽 x1 8
- 캣워크 경사로 7
- 사다리 7
- 토대 1m 6
- 금속 빔 6
- 경사진 벽 8m 6
- 제련기 6
- 현대식 난간 5
- 프레임 토대 4
- 벽 부착형 투광 조명 3
- 대형 프레임 기둥 3
- 경사진 모퉁이 벽 8m 3
- 경사로 벽 4m 3
- 경사로 벽 8m 3
- 중앙 문 벽 3
- 개인 저장 상자 3
- 선별 분배기 3
- 전신주 Mk.1 3
- 지붕 1m 2
- 수평 지붕 2
- 조명 제어판 2
- 게이트 벽 2
- 자동화 게이트 2
- 사각 전광판 2m 2
- 대형 광고판 2
- 야외 전광판 2
- 컨베이어 벽 지지대 2
- 역방향 경사로 1m 1
- 이중 경사로 2m 1
- 역방향 하단 모퉁이 1m 1
- 역방향 오르막 모퉁이 2m 1
- 역방향 하단 모퉁이 2m 1
- 역방향 오르막 모퉁이 1m 1
- 도색된 빔 1
- 소형 광고판 1
- 라벨 전광판 4m 1
- 레이더 탑 1
- 채굴기 Mk.3 1
- 저장 컨테이너 1
- 컨베이어 천장 지지대 1
- 콘크리트 11,670
- 고속 전선 10,567
- 케이블 7,403
- 이산화규소 4,884
- 전선 3,949
- 강철 빔 3,162
- 보강된 철판 3,060
- 플라스틱 2,950
- 철판 2,855
- 철봉 2,356
- 진짜 눈 1,600
- 알클래드 알루미늄 판 1,148
- 강철 파이프 850
- 고중량 모듈식 골조 800
- 회전자 682
- 알루미늄 케이스 450
- 석영 수정 321
- 고속 커넥터 312
- 모터 295
- 포장된 산업용 빔 199
- 지팡이 사탕 160
- 무선 제어 장치 90
- 구리판 84
- 수정 발진기 41
- 인공지능 진폭 제한 회로 40
- FICMAS 장식 32
- 회로 기판 10
- 융합된 모듈식 골조 10
- 슈퍼컴퓨터 5
- 휴대용 채굴기 3
- 터보 모터 3
-
NeoMod - 2024. 4. 23. 오후 5:08:34
Beautiful Building! If only it wasn't conflicting with the global rail network...
-
xbb1024 - 2023. 3. 28. 오후 4:01:15
Hi everyone, sorry I've been away from the game for a bit. I'll look into making the fixes in my megaprint
-
jneal - 2023. 3. 12. 오후 4:38:42
I ended up raising this up with the calculator and converting it to use Rail way stations for all the input, makes it easier to bring material in from the map. Right now I have it working with all the rail stations all to the side, but I am working on moving them underneath to look nicer. Fixed a few bugs and adding more signs but this is a awesome build that you did. Once I am finished I can send you a copy if you want. I found out how to resize the pieces and I am converting some it to regular vanilla.
-
jneal - 2023. 2. 22. 오전 5:07:31
what mod is used for the oversized pieces?
-
RipTheJacker - 2023. 2. 21. 오후 1:42:32
@xbb1024 Great work, I really love your factories. However, as pointed out before, there is an error on 9th floor with rubber beeing used instead of circuit boards. It can easily be fixed with a little re-routing. But, there isnt enough circuit boards beeing made to cover it all. Do you have any suggestion or are you working on a fix?
-
dak4482 - 2023. 2. 9. 오후 10:07:42
Found one major error. On the 9th floor you have rubber being input to the adaptive control unit manufacturers instead of circuit boards. Definitely needs to be fixed.
-
dak4482 - 2023. 1. 30. 오후 10:12:38
Alot of lower level stuff goes below ground and cant be connected!!! This blueprint should be raised up AT LEAST 10 meters when placed. Or relocated where the landscape doesnt swallow up the lower level. Needs to be on LEVEL ground!!!!
-
dak4482 - 2023. 1. 23. 오후 8:09:36
I am hopelessly lost with this building. How do you get the products to the drones or out of the building???? NOTHING is labeled. The conveyors fro,m the back of the drones dead end at the inside wall. What do you connect those to??? There are conveyor connections on the walls of the interior shaft but again no labels and no connections that I can see to the production machines. HEEEELLLPPP!!!!
-
Novoca1n3 - 2022. 11. 20. 오전 2:29:58
Looks like a great factory however shame you're using mods.
-
xbb1024 - 2022. 11. 8. 오후 1:56:30
Power inputs to the building are under the path going into the entrance (you will see 3 of them)
-
Ventah - 2022. 11. 4. 오후 1:57:52
I really like this design, but I can't figure out where to connect the power. I powered the train station and hoped this will be enough but apparently somewhere else is a connection required. Can anyone tell me where?
-
xbb1024 - 2022. 10. 10. 오전 1:55:11
I started using resizing as a way to get my blueprints / save file smaller, when I made this one I didn't really consider how hard it would be to alter. I'll keep the floor under machines normal for future blueprints.
-
kammerkoenig - 2022. 10. 6. 오후 4:49:23
Had an issue with one wrong connection with rubber in the computer production (not sure anymore where it was) but still a nice build :D, but yes modification is difficult with the oversized pieces
-
Heathwing22 - 2022. 8. 29. 오후 9:22:39
Beautiful Building.....BUT oversized pieces make it impossible to add anything or change anything. I gave up on it.....