I'll go fix that, thanks for the report @capjack09 :)

Love it! One thing I had to fix however, there is a section of conveyor belt right after the initial input from the side of the building before the internal splitter that I had to upgrade from mk1 to mk2. Other tan that, this is working great!

Celti, to fix the flow problem for now i added one pump on the center pipe just passed the two water tanks. i think lowered one of the generators 120% and the remaining generators to 150%. once i get high tiers open i will try your other suggestions with Mk2 equipment.

Thank you for the suggestions. I am fairly new. i thought maybe i was losing instructions between FR and EN translation :)

Hi, so to understand how the building works: 300 water is needed. The 4 water inlets are interconnected and designed to provide near equal distribution of liquids throughout the system. There are two storage tanks that must be fully filled (automatic) before the generators start.

If you have the possibility to convert the red pipes to MK2 do it (it allows to increase the initial flow artificially with the eddies and the "storage" of the pipes)

You can also, if you can't put in mk2, put a pump between your water extractor and one of the connectors of the building (it will push to the maximum)

If none of these solutions work, then you can lower the power of a generator (the one that stops, preferably) by about 15-20%, which should allow for a surplus of water in the circuit (300 in the circuit for 290 consumed for example).

If you can MK2/put valves, you can solve the problem quite easily but it requires a higher level in the stages (and I didn't put anything like that on purpose because it's an early building). The simplest solution in early is to lower the power of a generator

If nothing works you can always send me the save of your game and I'll go see what can be wrong

So, i cant seem to fix the water flow problem. i have one Water extractor providing 300 water.....this still causes my generators to go on and off line randomly. i even attempted to attach a water extractor to all 4 pipe connectors on the ends of the building. this did not help. i also then add 2 additional extractors to the pipe junctions that are visable through basement of the building. still poor flow...can you help?