Radio/Computer Factory Tower (Update 8)
Multi-product factory tower in the east swamplands (update 8 map). New design has 9 production floors, each divided into 2 wings and vertical freight shafts. 8 drone ports connected to the freight shafts on the upper floors. Storage containers for finished goods are between floors. Raw input from the lower ground level (labeled). Central shaft contains hypertubes, stairwell and power distribution for the building. Power switches in a room under the central shaft.
If you wish to use this tower in a different location, everything from the ground floor up can be reused. The lower ground level (where freight comes in) is specific to the location topography.
Production:
Circuit Tower (northwest of main tower):
- Caterium Circuit Board Assemblers x 24
- Fused Quickwire Assemblers x 12
9th Floor:
- Adaptive Control Unit Manufacturers x 8
- Assembly Director System Assemblers x 6
- Electromagnetic Connection Rod Assemblers x 6
8th Floor:
- Caterium Computer Manufacturers x 10
- Super-State Computer Manufacturers x 4
7th Floor:
- Radio Control Unit Manufacturers x 12
- Crystal Beacon Manufacturers x 4
6th Floor:
- Silicon Circuit Board Assemblers x 14
- Silicon High Speed Connector Manufacturers x 8
5th Floor:
- Fused Wire Assemblers x 14
- Automated Speed Wiring Manufacturers x 8
4th Floor:
- Fused Quickwire Assemblers x 28
3rd Floor:
- Heavy Encased Frame Manufacturers x 3
- Alclad Casing Assemblers x 5 (only 3 turned on, not enough copper in the swampland)
- Bolted Frame Assemblers x 6
- Encased Industrial Pipe Assemblers x 8
2nd Floor:
- Stator Assemblers x 10
- Steel Rotor Assemblers x 2
- Cast Screw Constructors x 27
- Steel Pipe Constructors x 25
- Steel Beam Constructor
1st Floor:
- Copper Sheet Constructors x 52
- Reinforced Iron Plate Assemblers x 9
- Smart Plating Assemblers x 5
Upper Ground:
- Iron Plate Constructors x 14
- Iron Wire Constructors x 21 (plenty of iron but not enough copper in swampland)
Logistics:
Minimum requirements:
Entry point for most of the raw materials is on the lower ground level, labeled with signs. Via truck, additional Caterium Ingots, Rubber, Batteries and Quartz Oscillators.
Please see my other blueprints https://satisfactory-calculator.com/megaprints/index/details/id/1349/name/Swampland+Infrastructure%2FResources+%28Update+6%29 for metals and https://satisfactory-calculator.com/megaprints/index/details/id/1273/name/Quartz+Hill+Factory for silica.
Modded Content:
Please note that I use oversized pieces in this blueprint.
Version History
- V2.0 Now fixed for update 4.
- V3.0 Fixed for update 6 map.
- V3.1 Replaced floors under manufacturers / assemblers with normal sized pieces. Removed AI limiters from production to allow for more radio control units. Minor conveyor balancing improvements.
- V3.2 Fixed conveyor lift to adaptive control units, thanks to comment feedback below.
- V4.0 Moved circuit tower into the swamp, now part of this blueprint.
- Items count 11.520
- Coordinates 233.717 / 32.073
- Only paste on original location Yes
- Categorie Architecture Complete factory Interior decorations Exterior decorations Modded UPDATE 7 UPDATE 8
- Created on 26/nov/2020 07:05:58
- Last updated on 26/lug/2023 03:45:10
- Finestra con telaio 1.269
- Fondazione 1m 983
- Finestra del pannello 983
- Linea elettrica 921
- Nastro trasportatore verticale Mk.2 554
- Nastro trasportatore Mk.2 425
- Separatore di nastri trasportatori 401
- Nastro trasportatore Mk.3 395
- Nastro trasportatore Mk.1 391
- Nastro trasportatore Mk.5 384
- Parete inclinata 8m 372
- Fondazione 1m 366
- Parete semplice 4m 266
- Unificatore di nastri trasportatori 238
- Telaio di fondazione in vetro 216
- Palo per nastro trasportatore 215
- Presa a parete Mk.1 194
- Illuminazione a soffitto 181
- Nastro trasportatore verticale Mk.5 157
- Griglia a pavimento 154
- Assemblatore 149
- Costruttore 140
- Nastro trasportatore verticale Mk.3 131
- Nastro trasportatore verticale Mk.1 129
- Finestra singola 105
- Ringhiera industriale 105
- Pilastro di calcestruzzo piccolo 94
- Cartello quadrato 0.5m 93
- Foro da pavimento per trasportatori verticali 93
- Scale di passerelle industriali 89
- Parete inclinata 4m 84
- Finestra del pannello 66
- Nastro trasportatore Mk.4 64
- Produttore 59
- Lampione 55
- Palo per nastro trasportatore impilabile 50
- Angolo in salita invertito 1m 41
- Tetto piano 39
- Pilastro di calcestruzzo grande 34
- Fondazione 4m 32
- Parete con porta a lato 31
- Interruttore di alimentazione 31
- Rampa angolare in salita 1m 30
- Cartello quadrato 1m 29
- Parete semplice 1m 28
- Incrocio a T di passerelle industriali 28
- Ipertubo 28
- Incrocio di passerelle industriali 23
- Container di stoccaggio industriale 22
- Parete con supporti per nastri trasportatori x3 20
- Ingresso ipertubi 20
- Fondazione 1m 19
- Parete rampa invertita 8m 19
- Finestra senza bordi 19
- Parete con porta centrale 18
- Parete semplice 4m 18
- Foro per ipertubi da pavimento 18
- Parete rampa invertita 4m 16
- FICSMAS Distributore di neve 16
- Angolo di passerelle industriali 15
- Telaio di parete 14
- Passerella industriale dritta 13
- Supporto per ipertubi 12
- Rampa invertita 1m 11
- Mezza fondazione 1m 11
- Parete ad angolo inclinata 4m 11
- Cartello etichetta 2m 11
- Nastro trasportatore verticale Mk.4 11
- Parete con supporti per nastri trasportatori x2 10
- Rampa 1m 9
- Tetto piano 9
- Cartello etichetta 3m 9
- Eliporto 9
- Parete con supporti per nastri trasportatori x1 8
- Rampa di passerelle industriali 7
- Scala a pioli 7
- Fondazione 1m 6
- Trave di metallo 6
- Parete inclinata 8m 6
- Fonderia 6
- Ringhiera moderna 5
- Telaio di fondazione 4
- Faro a parete 3
- Telaio di pilastro grande 3
- Parete ad angolo inclinata 8m 3
- Parete rampa 4m 3
- Parete rampa 8m 3
- Parete con porta centrale 3
- Cassa di deposito personale 3
- Separatore intelligente 3
- Palo elettrico Mk.1 3
- Tetto 1m 2
- Tetto piano 2
- Pannello di controllo delle luci 2
- Parete con varco di accesso 2
- Cancello automatico 2
- Cartello quadrato 2m 2
- Tabellone grande 2
- Cartello espositore 2
- Supporto da parete per trasportatori 2
- Rampa invertita 1m 1
- Rampa doppia 2m 1
- Angolo in discesa invertito 1m 1
- Angolo in salita invertito 2m 1
- Angolo in discesa invertito 2m 1
- Angolo in salita invertito 1m 1
- Trave verniciata 1
- Tabellone piccolo 1
- Cartello etichetta 4m 1
- Torre radar 1
- Trivella Mk.3 1
- Container di stoccaggio 1
- Supporto a soffitto per nastro trasportatore 1
- Calcestruzzo 11.670
- Filorapido 10.567
- Cavo 7.403
- Silice 4.884
- Filo 3.949
- Trave di acciaio 3.162
- Lamiera di ferro rinforzata 3.060
- Plastica 2.950
- Lamiera di ferro 2.855
- Barra di ferro 2.356
- Neve vera 1.600
- Lamiera d\'alluminio Alclad 1.148
- Tubo di acciaio 850
- Telaio modulare pesante 800
- Rotore 682
- Contenitore di alluminio 450
- Cristallo di quarzo 321
- Connettore ad alta velocità 312
- Motore 295
- Trave di cemento armato 199
- Bastone di zucchero 160
- Unità di controllo radio 90
- Lamiera di rame 84
- Oscillatore al cristallo 41
- Limitatore di IA 40
- Ghirlanda FICSMAS 32
- Scheda a circuito 10
- Telaio modulare fuso 10
- Supercomputer 5
- Trivella portatile 3
- Motore turbo 3
-
xbb1024 - 28/mar/2023 16:01:15
Hi everyone, sorry I've been away from the game for a bit. I'll look into making the fixes in my megaprint
-
jneal - 12/mar/2023 16:38:42
I ended up raising this up with the calculator and converting it to use Rail way stations for all the input, makes it easier to bring material in from the map. Right now I have it working with all the rail stations all to the side, but I am working on moving them underneath to look nicer. Fixed a few bugs and adding more signs but this is a awesome build that you did. Once I am finished I can send you a copy if you want. I found out how to resize the pieces and I am converting some it to regular vanilla.
-
jneal - 22/feb/2023 05:07:31
what mod is used for the oversized pieces?
-
RipTheJacker - 21/feb/2023 13:42:32
@xbb1024 Great work, I really love your factories. However, as pointed out before, there is an error on 9th floor with rubber beeing used instead of circuit boards. It can easily be fixed with a little re-routing. But, there isnt enough circuit boards beeing made to cover it all. Do you have any suggestion or are you working on a fix?
-
dak4482 - 09/feb/2023 22:07:42
Found one major error. On the 9th floor you have rubber being input to the adaptive control unit manufacturers instead of circuit boards. Definitely needs to be fixed.
-
dak4482 - 30/gen/2023 22:12:38
Alot of lower level stuff goes below ground and cant be connected!!! This blueprint should be raised up AT LEAST 10 meters when placed. Or relocated where the landscape doesnt swallow up the lower level. Needs to be on LEVEL ground!!!!
-
dak4482 - 23/gen/2023 20:09:36
I am hopelessly lost with this building. How do you get the products to the drones or out of the building???? NOTHING is labeled. The conveyors fro,m the back of the drones dead end at the inside wall. What do you connect those to??? There are conveyor connections on the walls of the interior shaft but again no labels and no connections that I can see to the production machines. HEEEELLLPPP!!!!
-
Novoca1n3 - 20/nov/2022 02:29:58
Looks like a great factory however shame you're using mods.
-
xbb1024 - 08/nov/2022 13:56:30
Power inputs to the building are under the path going into the entrance (you will see 3 of them)
-
Ventah - 04/nov/2022 13:57:52
I really like this design, but I can't figure out where to connect the power. I powered the train station and hoped this will be enough but apparently somewhere else is a connection required. Can anyone tell me where?
-
xbb1024 - 10/ott/2022 01:55:11
I started using resizing as a way to get my blueprints / save file smaller, when I made this one I didn't really consider how hard it would be to alter. I'll keep the floor under machines normal for future blueprints.
-
kammerkoenig - 06/ott/2022 16:49:23
Had an issue with one wrong connection with rubber in the computer production (not sure anymore where it was) but still a nice build :D, but yes modification is difficult with the oversized pieces
-
Heathwing22 - 29/ago/2022 21:22:39
Beautiful Building.....BUT oversized pieces make it impossible to add anything or change anything. I gave up on it.....