Radio/Computer Factory Tower (Update 8)
Multi-product factory tower in the east swamplands (update 8 map). New design has 9 production floors, each divided into 2 wings and vertical freight shafts. 8 drone ports connected to the freight shafts on the upper floors. Storage containers for finished goods are between floors. Raw input from the lower ground level (labeled). Central shaft contains hypertubes, stairwell and power distribution for the building. Power switches in a room under the central shaft.
If you wish to use this tower in a different location, everything from the ground floor up can be reused. The lower ground level (where freight comes in) is specific to the location topography.
Production:
Circuit Tower (northwest of main tower):
- Caterium Circuit Board Assemblers x 24
- Fused Quickwire Assemblers x 12
9th Floor:
- Adaptive Control Unit Manufacturers x 8
- Assembly Director System Assemblers x 6
- Electromagnetic Connection Rod Assemblers x 6
8th Floor:
- Caterium Computer Manufacturers x 10
- Super-State Computer Manufacturers x 4
7th Floor:
- Radio Control Unit Manufacturers x 12
- Crystal Beacon Manufacturers x 4
6th Floor:
- Silicon Circuit Board Assemblers x 14
- Silicon High Speed Connector Manufacturers x 8
5th Floor:
- Fused Wire Assemblers x 14
- Automated Speed Wiring Manufacturers x 8
4th Floor:
- Fused Quickwire Assemblers x 28
3rd Floor:
- Heavy Encased Frame Manufacturers x 3
- Alclad Casing Assemblers x 5 (only 3 turned on, not enough copper in the swampland)
- Bolted Frame Assemblers x 6
- Encased Industrial Pipe Assemblers x 8
2nd Floor:
- Stator Assemblers x 10
- Steel Rotor Assemblers x 2
- Cast Screw Constructors x 27
- Steel Pipe Constructors x 25
- Steel Beam Constructor
1st Floor:
- Copper Sheet Constructors x 52
- Reinforced Iron Plate Assemblers x 9
- Smart Plating Assemblers x 5
Upper Ground:
- Iron Plate Constructors x 14
- Iron Wire Constructors x 21 (plenty of iron but not enough copper in swampland)
Logistics:
Minimum requirements:
Entry point for most of the raw materials is on the lower ground level, labeled with signs. Via truck, additional Caterium Ingots, Rubber, Batteries and Quartz Oscillators.
Please see my other blueprints https://satisfactory-calculator.com/megaprints/index/details/id/1349/name/Swampland+Infrastructure%2FResources+%28Update+6%29 for metals and https://satisfactory-calculator.com/megaprints/index/details/id/1273/name/Quartz+Hill+Factory for silica.
Modded Content:
Please note that I use oversized pieces in this blueprint.
Version History
- V2.0 Now fixed for update 4.
- V3.0 Fixed for update 6 map.
- V3.1 Replaced floors under manufacturers / assemblers with normal sized pieces. Removed AI limiters from production to allow for more radio control units. Minor conveyor balancing improvements.
- V3.2 Fixed conveyor lift to adaptive control units, thanks to comment feedback below.
- V4.0 Moved circuit tower into the swamp, now part of this blueprint.
- Nombre d'objets 11 520
- Coordonnées 233 717 / 32 073
- Coller uniquement à l'emplacement d'origine Yes
- Catégories Architecture Complete factory Interior decorations Exterior decorations Modded UPDATE 7 UPDATE 8
-
Évaluation
4 / 5
- Version 240 610
- Auteur xbb1024
- Télécharger (7 022x) Télécharger
- Taille du fichier 1,3 MB
- Created on 26 nov. 2020 07:05:58
- Dernière mise à jour le 26 juil. 2023 03:45:10
- Cadre de fenêtre 1 269
- Fondation 1m 983
- Panneau de fenêtre 983
- Ligne électrique 921
- Convoyeur vertical Mk.2 554
- Convoyeur Mk.2 425
- Répartiteur de convoyeurs 401
- Convoyeur Mk.3 395
- Convoyeur Mk.1 391
- Convoyeur Mk.5 384
- Mur incliné 8m 372
- Fondation 1m 366
- Mur 4m 266
- Groupeur de convoyeurs 238
- Fondation en verre 216
- Pylône de convoyeur 215
- Prise murale Mk.1 194
- Plafonnier 181
- Convoyeur vertical Mk.5 157
- Sol en charpente métallique 154
- Assembleuse 149
- Constructeur 140
- Convoyeur vertical Mk.3 131
- Convoyeur vertical Mk.1 129
- Fenêtre unique 105
- Garde-corps industriels 105
- Petit pilier en béton 94
- Panneau carré 0.5m 93
- Passage de sol pour convoyeurs verticaux 93
- Escalier de Passerelle 89
- Mur incliné 4m 84
- Panneau de fenêtre 66
- Convoyeur Mk.4 64
- Façonneuse 59
- Lampadaire 55
- Pylône de convoyeur empilable 50
- Coin haut inversé 1m 41
- Toit plat 39
- Grand pilier en béton 34
- Fondation 4m 32
- Mur avec porte latérale 31
- Interrupteur 31
- Rampe d'angle hauteur 1m 30
- Panneau carré 1m 29
- Mur 1m 28
- Croisement en T de Passerelle 28
- Hypertube 28
- Croisement de passerelle 23
- Conteneur industriel 22
- Mur avec passage de 3 convoyeurs 20
- Entrée pour hypertube 20
- Fondation 1m 19
- Rampe murale inversée 8m 19
- Cadre de fenêtre entier 19
- Mur avec porte centrale 18
- Mur 4m 18
- Passage de sol pour hypertubes 18
- Rampe murale inversée 4m 16
- Générateur a neige FICSMAS 16
- Passerelle d'angle 15
- Mur en charpente métallique 14
- Passerelle droite 13
- Support pour hypertube 12
- Rampe inversée 1m 11
- Demi-fondation 1m 11
- Coin de mur incliné 4m 11
- Panneau d'étiquetage 2m 11
- Convoyeur vertical Mk.4 11
- Mur avec passage de 2 convoyeurs 10
- Rampe 1a 9
- Toit plat 9
- Panneau d'étiquetage 3m 9
- Héliport 9
- Mur avec passage de 1 convoyeur 8
- Rampe de Passerelle 7
- Échelle 7
- Fondation 1m 6
- Poutre métallique 6
- Mur incliné 8m 6
- Fonderie 6
- Garde-corps modernes 5
- Fondation en charpente métallique 4
- Projecteur mural 3
- Grand pilier en charpente métallique 3
- Coin de mur incliné 8m 3
- Rampe murale 4m 3
- Rampe murale 8m 3
- Mur avec porte centrale 3
- Coffre individuel 3
- Répartiteur intelligent 3
- Poteau électrique Mk.1 3
- Toit 1m 2
- Toit plat 2
- Panneau de contrôle des lumières 2
- Mur avec grande porte 2
- Porte automatique 2
- Panneau carré 2m 2
- Grand panneau d'affichage 2
- Panneau d'affichage 2
- Support mural pour convoyeur 2
- Rampe inversée 1m 1
- Double rampe 2m 1
- Coin bas inversé 1m 1
- Coin haut inversé 2m 1
- Coin bas inversé 2m 1
- Coin haut inversé 1m 1
- Poutre peinte 1
- Petit panneau d'affichage 1
- Panneau d'étiquetage 4m 1
- Tour radar 1
- Foreuse Mk.3 1
- Conteneur de stockage 1
- Support de plafond pour convoyeur 1
- Béton 11 670
- Filactif 10 567
- Câble 7 403
- Silice 4 884
- Fil électrique 3 949
- Poutre en acier 3 162
- Plaque de fer renforcée 3 060
- Plastique 2 950
- Plaque de fer 2 855
- Tige de fer 2 356
- Vraie neige 1 600
- Tôle d'aluminium en alliage Alclad 1 148
- Tuyau en acier 850
- Cadre modulaire lourd 800
- Rotor 682
- Boîtier en aluminium 450
- Cristal de quartz 321
- Connecteur haute vitesse 312
- Moteur 295
- Poutre en béton armé 199
- Sucre d'orge 160
- Unité de contrôle radio 90
- Tôle de cuivre 84
- Oscillateur à cristal 41
- Contrôleur d'I.A. 40
- Décoration FICSMAS 32
- Circuit imprimé 10
- Cadre modulaire fusionné 10
- Supercalculateur 5
- Foreuse portable 3
- Moteur turbo 3
-
NeoMod - 23 avr. 2024 17:08:34
Beautiful Building! If only it wasn't conflicting with the global rail network...
-
xbb1024 - 28 mars 2023 16:01:15
Hi everyone, sorry I've been away from the game for a bit. I'll look into making the fixes in my megaprint
-
jneal - 12 mars 2023 16:38:42
I ended up raising this up with the calculator and converting it to use Rail way stations for all the input, makes it easier to bring material in from the map. Right now I have it working with all the rail stations all to the side, but I am working on moving them underneath to look nicer. Fixed a few bugs and adding more signs but this is a awesome build that you did. Once I am finished I can send you a copy if you want. I found out how to resize the pieces and I am converting some it to regular vanilla.
-
jneal - 22 févr. 2023 05:07:31
what mod is used for the oversized pieces?
-
RipTheJacker - 21 févr. 2023 13:42:32
@xbb1024 Great work, I really love your factories. However, as pointed out before, there is an error on 9th floor with rubber beeing used instead of circuit boards. It can easily be fixed with a little re-routing. But, there isnt enough circuit boards beeing made to cover it all. Do you have any suggestion or are you working on a fix?
-
dak4482 - 9 févr. 2023 22:07:42
Found one major error. On the 9th floor you have rubber being input to the adaptive control unit manufacturers instead of circuit boards. Definitely needs to be fixed.
-
dak4482 - 30 janv. 2023 22:12:38
Alot of lower level stuff goes below ground and cant be connected!!! This blueprint should be raised up AT LEAST 10 meters when placed. Or relocated where the landscape doesnt swallow up the lower level. Needs to be on LEVEL ground!!!!
-
dak4482 - 23 janv. 2023 20:09:36
I am hopelessly lost with this building. How do you get the products to the drones or out of the building???? NOTHING is labeled. The conveyors fro,m the back of the drones dead end at the inside wall. What do you connect those to??? There are conveyor connections on the walls of the interior shaft but again no labels and no connections that I can see to the production machines. HEEEELLLPPP!!!!
-
Novoca1n3 - 20 nov. 2022 02:29:58
Looks like a great factory however shame you're using mods.
-
xbb1024 - 8 nov. 2022 13:56:30
Power inputs to the building are under the path going into the entrance (you will see 3 of them)
-
Ventah - 4 nov. 2022 13:57:52
I really like this design, but I can't figure out where to connect the power. I powered the train station and hoped this will be enough but apparently somewhere else is a connection required. Can anyone tell me where?
-
xbb1024 - 10 oct. 2022 01:55:11
I started using resizing as a way to get my blueprints / save file smaller, when I made this one I didn't really consider how hard it would be to alter. I'll keep the floor under machines normal for future blueprints.
-
kammerkoenig - 6 oct. 2022 16:49:23
Had an issue with one wrong connection with rubber in the computer production (not sure anymore where it was) but still a nice build :D, but yes modification is difficult with the oversized pieces
-
Heathwing22 - 29 août 2022 21:22:39
Beautiful Building.....BUT oversized pieces make it impossible to add anything or change anything. I gave up on it.....