Stackable Motor Factory 2.15/min/floor

input : Iron Ingot 120/mins/floor

output : Motor 2.15/min/floor

The preset conveyor belt is MK4 , Maximum 480/mins, So only support to 4 floors high, If you want to build 10 floor high, need upgrade the conveyor belt in the blueprint to MK6.

Alternate Recipes: Iron Pipe, Iron Wire, Steel Rotor
  • Luotu 25.10.2024 21.10.53
  • Last updated on 25.10.2024 21.55.25
  • Maaaaarques97 - 5.11.2024 10.40.44

    Also the input as the constructors are set in the blueprint is 137.5 iron ingots.

  • Maaaaarques97 - 5.11.2024 10.40.04

    I have been using this on 1.0 with a lot of success. I increase output to 2.5/min with just 1 power shard.

  • ghouse.jk - 26.10.2024 15.17.26

    Indeed, I didn't set it up. constructors's clocks speed right to be : 100%-100%-69%-86% after all,it will still have a load balance to the target rate for a while.

  • Balgrif - 26.10.2024 11.04.24

    I like your print, but it seems you forgot to set the constructors' clocks speed. For those having my problem, from ingots entrance to next floor's, constructors have to be : 100%-100%-69%-86% if not wrong