Radio/Computer Factory Tower (Update 8)
Multi-product factory tower in the east swamplands (update 8 map). New design has 9 production floors, each divided into 2 wings and vertical freight shafts. 8 drone ports connected to the freight shafts on the upper floors. Storage containers for finished goods are between floors. Raw input from the lower ground level (labeled). Central shaft contains hypertubes, stairwell and power distribution for the building. Power switches in a room under the central shaft.
If you wish to use this tower in a different location, everything from the ground floor up can be reused. The lower ground level (where freight comes in) is specific to the location topography.
Production:
Circuit Tower (northwest of main tower):
- Caterium Circuit Board Assemblers x 24
- Fused Quickwire Assemblers x 12
9th Floor:
- Adaptive Control Unit Manufacturers x 8
- Assembly Director System Assemblers x 6
- Electromagnetic Connection Rod Assemblers x 6
8th Floor:
- Caterium Computer Manufacturers x 10
- Super-State Computer Manufacturers x 4
7th Floor:
- Radio Control Unit Manufacturers x 12
- Crystal Beacon Manufacturers x 4
6th Floor:
- Silicon Circuit Board Assemblers x 14
- Silicon High Speed Connector Manufacturers x 8
5th Floor:
- Fused Wire Assemblers x 14
- Automated Speed Wiring Manufacturers x 8
4th Floor:
- Fused Quickwire Assemblers x 28
3rd Floor:
- Heavy Encased Frame Manufacturers x 3
- Alclad Casing Assemblers x 5 (only 3 turned on, not enough copper in the swampland)
- Bolted Frame Assemblers x 6
- Encased Industrial Pipe Assemblers x 8
2nd Floor:
- Stator Assemblers x 10
- Steel Rotor Assemblers x 2
- Cast Screw Constructors x 27
- Steel Pipe Constructors x 25
- Steel Beam Constructor
1st Floor:
- Copper Sheet Constructors x 52
- Reinforced Iron Plate Assemblers x 9
- Smart Plating Assemblers x 5
Upper Ground:
- Iron Plate Constructors x 14
- Iron Wire Constructors x 21 (plenty of iron but not enough copper in swampland)
Logistics:
Minimum requirements:
Entry point for most of the raw materials is on the lower ground level, labeled with signs. Via truck, additional Caterium Ingots, Rubber, Batteries and Quartz Oscillators.
Please see my other blueprints https://satisfactory-calculator.com/megaprints/index/details/id/1349/name/Swampland+Infrastructure%2FResources+%28Update+6%29 for metals and https://satisfactory-calculator.com/megaprints/index/details/id/1273/name/Quartz+Hill+Factory for silica.
Modded Content:
Please note that I use oversized pieces in this blueprint.
Version History
- V2.0 Now fixed for update 4.
- V3.0 Fixed for update 6 map.
- V3.1 Replaced floors under manufacturers / assemblers with normal sized pieces. Removed AI limiters from production to allow for more radio control units. Minor conveyor balancing improvements.
- V3.2 Fixed conveyor lift to adaptive control units, thanks to comment feedback below.
- V4.0 Moved circuit tower into the swamp, now part of this blueprint.
- Items count 11,520
- Coordinates 233,717 / 32,073
- Only paste on original location Yes
- Categories Architecture Complete factory Interior decorations Exterior decorations Modded UPDATE 7 UPDATE 8
- Created on Nov 26, 2020, 7:05:58 AM
- Last updated on Jul 26, 2023, 3:45:10 AM
- Frame Window 1,269
- Foundation 1m 983
- Panel Window 983
- Power Line 921
- Conveyor Lift Mk.2 554
- Conveyor Belt Mk.2 425
- Conveyor Splitter 401
- Conveyor Belt Mk.3 395
- Conveyor Belt Mk.1 391
- Conveyor Belt Mk.5 384
- Tilted Wall 8m 372
- Foundation 1m 366
- Basic Wall 4m 266
- Conveyor Merger 238
- Glass Frame Foundation 216
- Conveyor Pole 215
- Wall Outlet Mk.1 194
- Ceiling Light 181
- Conveyor Lift Mk.5 157
- Frame Floor 154
- Assembler 149
- Constructor 140
- Conveyor Lift Mk.3 131
- Conveyor Lift Mk.1 129
- Single Window 105
- Industrial Railing 105
- Small Concrete Pillar 94
- Square Sign 0.5m 93
- Conveyor Lift Floor Hole 93
- Catwalk Stairs 89
- Tilted Wall 4m 84
- Panel Window 66
- Conveyor Belt Mk.4 64
- Manufacturer 59
- Street Light 55
- Stackable Conveyor Pole 50
- Inv. Up Corner 1m 41
- Roof Flat 39
- Big Concrete Pillar 34
- Foundation 4m 32
- Side Door Wall 31
- Power Switch 31
- Up Corner Ramp 1m 30
- Square Sign 1m 29
- Basic Wall 1m 28
- Catwalk T-Crossing 28
- Hypertube 28
- Catwalk Crossing 23
- Industrial Storage Container 22
- Conveyor Wall x3 20
- Hypertube Entrance 20
- Foundation 1m 19
- Inv. Ramp Wall 8m 19
- Full Frame Window 19
- Center Door Wall 18
- Basic Wall 4m 18
- Hypertube Floor Hole 18
- Inv. Ramp Wall 4m 16
- FICSMAS Snow Dispenser 16
- Catwalk Corner 15
- Frame Wall 14
- Catwalk Straight 13
- Hypertube Support 12
- Inv. Ramp 1m 11
- Half 1m Foundation 11
- Tilted Corner Wall 4m 11
- Label Sign 2m 11
- Conveyor Lift Mk.4 11
- Conveyor Wall x2 10
- Ramp 1m 9
- Roof Flat 9
- Label Sign 3m 9
- Drone Port 9
- Conveyor Wall x1 8
- Catwalk Ramp 7
- Ladder 7
- Foundation 1m 6
- Metal Beam 6
- Tilted Wall 8m 6
- Smelter 6
- Modern Railing 5
- Frame Foundation 4
- Wall Mounted Flood Light 3
- Big Frame Pillar 3
- Tilted Corner Wall 8m 3
- Ramp Wall 4m 3
- Ramp Wall 8m 3
- Center Door Wall 3
- Personal Storage Box 3
- Smart Splitter 3
- Power Pole Mk.1 3
- Roof 1m 2
- Roof Flat 2
- Lights Control Panel 2
- Gate Hole Wall 2
- Automated Gate 2
- Square Sign 2m 2
- Large Billboard 2
- Display Sign 2
- Conveyor Wall Mount 2
- Inv. Ramp 1m 1
- Double Ramp 2m 1
- Inv. Down Corner 1m 1
- Inv. Up Corner 2m 1
- Inv. Down Corner 2m 1
- Inv. Up Corner 1m 1
- Painted Beam 1
- Small Billboard 1
- Label Sign 4m 1
- Radar Tower 1
- Miner Mk.3 1
- Storage Container 1
- Conveyor Ceiling Mount 1
- Concrete 11,670
- Quickwire 10,567
- Cable 7,403
- Silica 4,884
- Wire 3,949
- Steel Beam 3,162
- Reinforced Iron Plate 3,060
- Plastic 2,950
- Iron Plate 2,855
- Iron Rod 2,356
- Actual Snow 1,600
- Alclad Aluminum Sheet 1,148
- Steel Pipe 850
- Heavy Modular Frame 800
- Rotor 682
- Aluminum Casing 450
- Quartz Crystal 321
- High-Speed Connector 312
- Motor 295
- Encased Industrial Beam 199
- Candy Cane 160
- Radio Control Unit 90
- Copper Sheet 84
- Crystal Oscillator 41
- AI Limiter 40
- FICSMAS Decoration 32
- Circuit Board 10
- Fused Modular Frame 10
- Supercomputer 5
- Portable Miner 3
- Turbo Motor 3
-
NeoMod - Apr 23, 2024, 5:08:34 PM
Beautiful Building! If only it wasn't conflicting with the global rail network...
-
xbb1024 - Mar 28, 2023, 4:01:15 PM
Hi everyone, sorry I've been away from the game for a bit. I'll look into making the fixes in my megaprint
-
jneal - Mar 12, 2023, 4:38:42 PM
I ended up raising this up with the calculator and converting it to use Rail way stations for all the input, makes it easier to bring material in from the map. Right now I have it working with all the rail stations all to the side, but I am working on moving them underneath to look nicer. Fixed a few bugs and adding more signs but this is a awesome build that you did. Once I am finished I can send you a copy if you want. I found out how to resize the pieces and I am converting some it to regular vanilla.
-
jneal - Feb 22, 2023, 5:07:31 AM
what mod is used for the oversized pieces?
-
RipTheJacker - Feb 21, 2023, 1:42:32 PM
@xbb1024 Great work, I really love your factories. However, as pointed out before, there is an error on 9th floor with rubber beeing used instead of circuit boards. It can easily be fixed with a little re-routing. But, there isnt enough circuit boards beeing made to cover it all. Do you have any suggestion or are you working on a fix?
-
dak4482 - Feb 9, 2023, 10:07:42 PM
Found one major error. On the 9th floor you have rubber being input to the adaptive control unit manufacturers instead of circuit boards. Definitely needs to be fixed.
-
dak4482 - Jan 30, 2023, 10:12:38 PM
Alot of lower level stuff goes below ground and cant be connected!!! This blueprint should be raised up AT LEAST 10 meters when placed. Or relocated where the landscape doesnt swallow up the lower level. Needs to be on LEVEL ground!!!!
-
dak4482 - Jan 23, 2023, 8:09:36 PM
I am hopelessly lost with this building. How do you get the products to the drones or out of the building???? NOTHING is labeled. The conveyors fro,m the back of the drones dead end at the inside wall. What do you connect those to??? There are conveyor connections on the walls of the interior shaft but again no labels and no connections that I can see to the production machines. HEEEELLLPPP!!!!
-
Novoca1n3 - Nov 20, 2022, 2:29:58 AM
Looks like a great factory however shame you're using mods.
-
xbb1024 - Nov 8, 2022, 1:56:30 PM
Power inputs to the building are under the path going into the entrance (you will see 3 of them)
-
Ventah - Nov 4, 2022, 1:57:52 PM
I really like this design, but I can't figure out where to connect the power. I powered the train station and hoped this will be enough but apparently somewhere else is a connection required. Can anyone tell me where?
-
xbb1024 - Oct 10, 2022, 1:55:11 AM
I started using resizing as a way to get my blueprints / save file smaller, when I made this one I didn't really consider how hard it would be to alter. I'll keep the floor under machines normal for future blueprints.
-
kammerkoenig - Oct 6, 2022, 4:49:23 PM
Had an issue with one wrong connection with rubber in the computer production (not sure anymore where it was) but still a nice build :D, but yes modification is difficult with the oversized pieces
-
Heathwing22 - Aug 29, 2022, 9:22:39 PM
Beautiful Building.....BUT oversized pieces make it impossible to add anything or change anything. I gave up on it.....