I am missing around 6000 power from one of the bp I have 600 rocket fuel and three plants only one is has a couple of generators not at 100%.any ideas? flow rate is 600 going into them.

@Kaz: No, you cannot use this blueprint with turbofuel, unless you add a pump in front of the pipe entrance and change the clock speed of the fuel generators (or change alle pipes to Mk2). @ CrimsonDemon: Yes, you can use that blueprint with Ionized fuel (as it is a gas, it lacks head lift requirements).

Hey, does this work for Ionized Fuel? If so, will it work when overclocked to 250%?

could this be fed with turbofuel?

I don’t understand your last comment. Could you elaborate or post a pic of what you mean, which pipes am I supposed to make mk2?

Forgot to mention: doing the above and keeping throughput also requires you to replace pipe segments connecting the fluid buffer with Mk2s.

As other people have mentioned, to get this to work you don't connect the pipes in the intuitive way (completing the circle) but cut the corner from the right side of the circle to the vertically oriented junction that is fed from the buffer up above.

I did however implement a slight optimization that lets you use both sides of the junction with a missing connection and complete the circle. Basically delete the existing junction and attach a new one to the little pipe stub sticking out of the left vertically oriented. Connect the right side of your junction to complete the circle, and feed the bottom port of each vertically oriented junction, making a U shape.

https://imgur.com/a/ePB0ChN

I don't think it looks worse, per se, and keeps symmetry as well as roughly halving how long it takes to start up all 24 generators (which isn't a big deal admittedly).

Love this version! That second pipe leading out and allowing me to connect to the next "tower" is such a simple concept, but sets yours apart by leagues.

To anyone having difficulty with the pipe connection at the end, it took me a minute to realize you're connecting that pipe over a junction from the center to the right path of pipes. Basically you pipe will clip though another pipeline junction. I kept trying to include the junction and was confused at first. Once connected everything works perfectly given enough time.

Thanks a ton for this! My fuel generation has never been easier (and clean looking thanks to that IN/OUT pipeline).

Hi [mduttondev] As already stated in the description, you have to connect the junction with the pipe coming from above with the right side (the beginning of the circle). Otherwise the pipes will not be filled and your generators have no fuel available. The "No Power" caution appears because the generator have no fuel transferred to them, because of the issue described.

I love the blueprint. There were 2 things that might need to be checked though, first, is that it seems like only 1 of the generators might be connected to power. I connected a full pipe of rocketfuel and only 1 generator kicks on, when I get up close to the others that are clipped and hit E to configure, they have a No Power banner showing in their control panel. Then second, is there a way to get a version of this without the added blue and purple coloring, It doesnt fit my factory and while recoloring will not be that big of an issue, it would be nice if it was just stock.