40 Fuel in = 40 Rubber out

Requieres 36MW to operate

15 modules for Mk2 pipe of Fuel

---

Max amount of Rubber for Mk2 pipe of Crude Oil is 1600 from Fuel + 200 from Polymer Resin = 1800

---

You can re-calibrate this module for any Rubber output folowing this scheme:

~ for the first Refinary target production rate is your desiered amount of Fuel input (or Rubber output) multiplied by 2/3

~ for the second Refinary is input multiplied by 4/3

---

For example to reduce amount of modules for Mk2 pipe of Fuel to 6:

~ 100 * 2 / 3 = 66.667

~ 100 * 4 / 3 = 133.334

It gives you 100 in 100 out and adds 4 Power Shards to a cost (120.7MW).

---

For the balance between Power Shards (2) and amount of modules (7):

~ 600 / 7 * 2 / 3 = 57.14285714285714

~ 600 / 7 * 4 / 3 = 114.28571428571428

Production rate here will be 600 / 7 = 85.71428571428571 from one module (98.4MW).

---

Another modification that you can make is removing 1 Splitter and 1 Merger. Nothing wil change in the output, but you should wait until first Refinary will be filld to the full stack of its input resource.