Radio/Computer Factory Tower (Update 8)
Multi-product factory tower in the east swamplands (update 8 map). New design has 9 production floors, each divided into 2 wings and vertical freight shafts. 8 drone ports connected to the freight shafts on the upper floors. Storage containers for finished goods are between floors. Raw input from the lower ground level (labeled). Central shaft contains hypertubes, stairwell and power distribution for the building. Power switches in a room under the central shaft.
If you wish to use this tower in a different location, everything from the ground floor up can be reused. The lower ground level (where freight comes in) is specific to the location topography.
Production:
Circuit Tower (northwest of main tower):
- Caterium Circuit Board Assemblers x 24
- Fused Quickwire Assemblers x 12
9th Floor:
- Adaptive Control Unit Manufacturers x 8
- Assembly Director System Assemblers x 6
- Electromagnetic Connection Rod Assemblers x 6
8th Floor:
- Caterium Computer Manufacturers x 10
- Super-State Computer Manufacturers x 4
7th Floor:
- Radio Control Unit Manufacturers x 12
- Crystal Beacon Manufacturers x 4
6th Floor:
- Silicon Circuit Board Assemblers x 14
- Silicon High Speed Connector Manufacturers x 8
5th Floor:
- Fused Wire Assemblers x 14
- Automated Speed Wiring Manufacturers x 8
4th Floor:
- Fused Quickwire Assemblers x 28
3rd Floor:
- Heavy Encased Frame Manufacturers x 3
- Alclad Casing Assemblers x 5 (only 3 turned on, not enough copper in the swampland)
- Bolted Frame Assemblers x 6
- Encased Industrial Pipe Assemblers x 8
2nd Floor:
- Stator Assemblers x 10
- Steel Rotor Assemblers x 2
- Cast Screw Constructors x 27
- Steel Pipe Constructors x 25
- Steel Beam Constructor
1st Floor:
- Copper Sheet Constructors x 52
- Reinforced Iron Plate Assemblers x 9
- Smart Plating Assemblers x 5
Upper Ground:
- Iron Plate Constructors x 14
- Iron Wire Constructors x 21 (plenty of iron but not enough copper in swampland)
Logistics:
Minimum requirements:
Entry point for most of the raw materials is on the lower ground level, labeled with signs. Via truck, additional Caterium Ingots, Rubber, Batteries and Quartz Oscillators.
Please see my other blueprints https://satisfactory-calculator.com/megaprints/index/details/id/1349/name/Swampland+Infrastructure%2FResources+%28Update+6%29 for metals and https://satisfactory-calculator.com/megaprints/index/details/id/1273/name/Quartz+Hill+Factory for silica.
Modded Content:
Please note that I use oversized pieces in this blueprint.
Version History
- V2.0 Now fixed for update 4.
- V3.0 Fixed for update 6 map.
- V3.1 Replaced floors under manufacturers / assemblers with normal sized pieces. Removed AI limiters from production to allow for more radio control units. Minor conveyor balancing improvements.
- V3.2 Fixed conveyor lift to adaptive control units, thanks to comment feedback below.
- V4.0 Moved circuit tower into the swamp, now part of this blueprint.
- Anzahl der Gegenstände 11.520
- Koordinaten 233.717 / 32.073
- Nur am ursprünglichen Ort einfügen Yes
- Kategorien Architecture Complete factory Interior decorations Exterior decorations Modded UPDATE 7 UPDATE 8
- Erstellt am 26.11.2020 07:05:58
- Zuletzt aktualisiert am 26.07.2023 03:45:10
- Fensterwand 1.269
- Fundament 1m 983
- Fensterwand mit Sprossen 983
- Stromleitung 921
- Förderlift Mk.2 554
- Förderband Mk.2 425
- Förderbandsplitter 401
- Förderband Mk.3 395
- Förderband Mk.1 391
- Förderband Mk.5 384
- Geneigte Wand 8m 372
- Fundament 1m 366
- Wand 4m 266
- Förderband-Fusionator 238
- Gläsernes Rahmenfundament 216
- Fördermast 215
- Wandstromverteiler Mk.1 194
- Deckenlicht 181
- Förderlift Mk.5 157
- Rahmenboden 154
- Fabrikator 149
- Konstruktor 140
- Förderlift Mk.3 131
- Förderlift Mk.1 129
- Einzelnes Fenster 105
- Industrielles Geländer 105
- Kleine Betonsäule 94
- Quadratisches Schild 0.5m 93
- Förderlift-Fundamentdurchführung 93
- Laufstegtreppen 89
- Geneigte Wand 4m 84
- Fensterwand mit Sprossen 66
- Förderband Mk.4 64
- Manufaktor 59
- Straßenbeleuchtung 55
- Stapelbarer Förderbandmast 50
- Inv. Eckrampe aufwärts 1m 41
- Flachdach 39
- Große Betonsäule 34
- Fundament 4m 32
- Wand mit seitlicher Tür 31
- Netzschalter 31
- Eck-Rampe aufwärts 1m 30
- Quadratisches Schild 1m 29
- Wand 1m 28
- Laufsteg mit T-Kreuzung 28
- Hypertube 28
- Laufstegkreuzung 23
- Industrieller Lagercontainer 22
- Wand mit Förderbanddurchführung x3 20
- Hypertube-Eingang 20
- Fundament 1m 19
- Inv. Rampenwand 8m 19
- Vollglas Fensterwand 19
- Wand mit mittiger Tür 18
- Wand 4m 18
- Hypertube-Fundamentdurchführung 18
- Inv. Rampenwand 4m 16
- FICSMAS Schneekanone 16
- Laufstegecke 15
- Rahmenwand 14
- Laufsteg Gerade 13
- Hypertube-Stütze 12
- Inv. Rampe 1m 11
- Halbfundament 1m 11
- Geneigte Eckwand 4m 11
- Beschriftungsschild 2m 11
- Förderlift Mk.4 11
- Wand mit Förderbanddurchführung x2 10
- Rampe 1m 9
- Flachdach 9
- Beschriftungsschild 3m 9
- Drohnenlandeplatz 9
- Wand mit Förderbanddurchführung x1 8
- Laufstegrampe 7
- Leiter 7
- Fundament 1m 6
- Metallträger 6
- Geneigte Wand 8m 6
- Schmelzofen 6
- Modernes Geländer 5
- Rahmenfundament 4
- Wandflutlicht 3
- Große Rahmensäule 3
- Geneigte Eckwand 8m 3
- Rampenwand 4m 3
- Rampenwand 8m 3
- Wand mit mittiger Tür 3
- Persönliche Aufbewahrungsbox 3
- Intelligenter Splitter 3
- Strommast Mk.1 3
- Dach 1 m 2
- Flachdach 2
- Beleuchtungssteuerung 2
- Wand mit Torbogen 2
- Automatisches Tor 2
- Quadratisches Schild 2m 2
- Große Werbetafel 2
- Display-Schild 2
- Förderband-Wandhalterung 2
- Inv. Rampe 1m 1
- Doppelrampe 2m 1
- Inv. Eckrampe abwärts 1m 1
- Inv. Eckrampe aufwärts 2m 1
- Inv. Eckrampe abwärts 2m 1
- Inv. Eckrampe aufwärts 1m 1
- Gefärbter Träger 1
- Kleine Werbetafel 1
- Beschriftungsschild 4m 1
- Radarturm 1
- Miner MK 3 1
- Lagercontainer 1
- Förderband-Deckenhalterung 1
- Beton 11.670
- Turbodraht 10.567
- Kabel 7.403
- Quarzsand 4.884
- Draht 3.949
- Stahlträger 3.162
- Verstärkte Eisenplatte 3.060
- Kunststoff 2.950
- Eisenplatte 2.855
- Eisenstange 2.356
- Tatsächlich Schnee 1.600
- Alclad-Aluminiumplatte 1.148
- Stahlrohr 850
- Schwerer modularer Rahmen 800
- Rotor 682
- Aluminiumgehäuse 450
- Quarzkristall 321
- Highspeed-Anschluss 312
- Motor 295
- Stahlbetonträger 199
- Zuckerstange 160
- Funksteuereinheit 90
- Kupferblech 84
- Quarzoszillator 41
- KI-Begrenzer 40
- FICSMAS Dekoration 32
- Platine 10
- Verschmolzener modularer Rahmen 10
- Supercomputer 5
- Mobiler Miner 3
- Turbomotor 3
-
xbb1024 - 28.03.2023 16:01:15
Hi everyone, sorry I've been away from the game for a bit. I'll look into making the fixes in my megaprint
-
jneal - 12.03.2023 16:38:42
I ended up raising this up with the calculator and converting it to use Rail way stations for all the input, makes it easier to bring material in from the map. Right now I have it working with all the rail stations all to the side, but I am working on moving them underneath to look nicer. Fixed a few bugs and adding more signs but this is a awesome build that you did. Once I am finished I can send you a copy if you want. I found out how to resize the pieces and I am converting some it to regular vanilla.
-
jneal - 22.02.2023 05:07:31
what mod is used for the oversized pieces?
-
RipTheJacker - 21.02.2023 13:42:32
@xbb1024 Great work, I really love your factories. However, as pointed out before, there is an error on 9th floor with rubber beeing used instead of circuit boards. It can easily be fixed with a little re-routing. But, there isnt enough circuit boards beeing made to cover it all. Do you have any suggestion or are you working on a fix?
-
dak4482 - 09.02.2023 22:07:42
Found one major error. On the 9th floor you have rubber being input to the adaptive control unit manufacturers instead of circuit boards. Definitely needs to be fixed.
-
dak4482 - 30.01.2023 22:12:38
Alot of lower level stuff goes below ground and cant be connected!!! This blueprint should be raised up AT LEAST 10 meters when placed. Or relocated where the landscape doesnt swallow up the lower level. Needs to be on LEVEL ground!!!!
-
dak4482 - 23.01.2023 20:09:36
I am hopelessly lost with this building. How do you get the products to the drones or out of the building???? NOTHING is labeled. The conveyors fro,m the back of the drones dead end at the inside wall. What do you connect those to??? There are conveyor connections on the walls of the interior shaft but again no labels and no connections that I can see to the production machines. HEEEELLLPPP!!!!
-
Novoca1n3 - 20.11.2022 02:29:58
Looks like a great factory however shame you're using mods.
-
xbb1024 - 08.11.2022 13:56:30
Power inputs to the building are under the path going into the entrance (you will see 3 of them)
-
Ventah - 04.11.2022 13:57:52
I really like this design, but I can't figure out where to connect the power. I powered the train station and hoped this will be enough but apparently somewhere else is a connection required. Can anyone tell me where?
-
xbb1024 - 10.10.2022 01:55:11
I started using resizing as a way to get my blueprints / save file smaller, when I made this one I didn't really consider how hard it would be to alter. I'll keep the floor under machines normal for future blueprints.
-
kammerkoenig - 06.10.2022 16:49:23
Had an issue with one wrong connection with rubber in the computer production (not sure anymore where it was) but still a nice build :D, but yes modification is difficult with the oversized pieces
-
Heathwing22 - 29.08.2022 21:22:39
Beautiful Building.....BUT oversized pieces make it impossible to add anything or change anything. I gave up on it.....