Electronics Factory

In:

  • 105 Copper ore
  • 135 Caterium ore
  • 111.94 Iron ore
  • 129 Raw quartz
  • 404.1 MWh power

Out:

  • 35 Quickwire
  • 5 AI Limiter
  • 5 Circuit Board
  • 3 High-Speed Connector
  • 3 Computer
  • 1.5 Crystal Oscillator

Load balanced as possible, but quickwire will generate about after 10 minutes.

Integrated option for dimensional depot: 3rd image. Go inside and up on the ramp and put down 6 depot, connect them with mk1 belt to the splitter. In case of a dimensional depot is present, it will be filled first.

Sink output must be used on the right side, because internally there is a sushi belt used.
  • Vytvořeno 25. 11. 2024 21:16:16
  • Naposledy aktualizováno 25. 11. 2024 21:17:33
  • alumriel - 21. 8. 2025 14:42:17

    Amazing work. I'm using this and others of yours. Any chance of more blueprints for other items? I can't get enough of your design. =)

  • YO9GVO - 28. 7. 2025 9:39:02

    Hello, Hello, What is the entry ~60 / min for?

  • nemmind1 - 12. 1. 2025 7:47:41

    I'll try to use the lowest possible belt everywhere in my blueprints. You can load it up in creative mode and replace all belts to a higher level if you'd like to, but the production won't be faster.

  • kai5510 - 9. 1. 2025 21:33:37

    Is it possible to make a drawing using mk3-4 tapes?

  • AndyC - 4. 1. 2025 17:22:11

    Ok totally user error on my part. I just linked the belt to the frame, once I pushed the belt back into the merger it works just fine. Sorry for the confusion

  • AndyC - 4. 1. 2025 0:44:26

    But beside the sink issue the factory works great! Just needs managing

  • AndyC - 4. 1. 2025 0:40:56

    I hooked up a sink to the outgoing belt on the right of the factory but nothing came out had to keep containers low to keep others filling

  • nemmind1 - 23. 12. 2024 19:05:54

    I'll plan to redesign this BP a little bit, but I don't know when: rotate the containers like my other BP-s, do some better belt work, make the Sink internal. In my save it works fine, but the Sink must be used. Have you set it up?

  • AndyC - 23. 12. 2024 13:16:26

    Cool factory unfortunately the overflow doesn’t work so if one thing gets full all production stops. I’m hoping the owner can fix this cause I really like the factory.